Modification on the chloride binding capacity of alkali activated slag by applying calcium and aluminium containing phases

More Info
expand_more

Abstract

In this study, a modified alkali activated slag system is designed by introducing additional calcium and aluminum containing phases in the binder, aiming at promote the formation of Friedel's salt (Fs) within the reaction products and therefore achieve a better chloride binding capacity. The effect of calcium and alumina contents on phase composition, chloride binding behavior, pore structure and mechanical properties of alkali activated slag are investigated. The results show that the addition of Ca(OH)2 and nano γ-Al2O3 (CH and NA) results in the residual CH within the reaction products, but when in present of chloride, all residual CH transformed into Fs or other phases. The chloride binding capacity of the binder is obviously enhanced by CH and NA addition, owing to the increased ability to chemically bind chloride through Fs formation. There also exists an optimum Ca/Al ratio of the starting material regarding the chloride binding capacity. Adding CH coarsen the pore structure of the hydrated matrix by increase the amount of pores with the sizes larger than 200 nm, while NA exhibits a contrary effect. The chloride chemically binding behavior, namely the formation of Fs, slightly reduced the porosity of the binder. The strength results illustrate the negative effect of CH on compressive strength, and NA presents a positive effect, the modified binding system is able to provide a comparable mechanical property when compared with the reference alkali activated mixture.

Files

1_s2.0_S0950061822030835_main.... (.pdf)
(.pdf | 1.38 Mb)
- Embargo expired in 01-07-2023