A Self-Activated Fault Current Limiter for Distribution Network Protection

Abstract

Rapid protection of modern electric networks using fault current limiters (FCLs) is often delayed and limited by the inherent controller, sensor, and power electronic unit delays. This article proposes a novel self-activated FCL (SAFCL), comprising a dc saturation winding, series ac limiter windings, and ac parallel reactor, which limits the fault current in less than 0.4 ms. Furthermore, the advantage of this SAFCL, when compared to a traditional saturated core FCL (SCFCL), is that it does not rely on any external controller, sensor, controllable solid-state switch, and battery. In the normal state, the SAFCL behaves like a saturated reactor with a very low impedance and in the fault state, cores are entered to the unsaturation region without relying on an external controller which imposes a high impedance to limit the fault, rapidly. The performance of the SAFCL is evaluated through off-line MATLAB and Maxwell ANSYS FEM simulations, and is also validated by experimental studies conducted on a scaled-down prototype.