Modeling the effect of prior austenite grain size on bainite formation kinetics
Daniel dos S. dos Santos Avila (TU Delft - Team Maria Santofimia Navarro)
S.E. Offerman (TU Delft - Team Erik Offerman)
MJ Santofimia (TU Delft - Team Maria Santofimia Navarro)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
While experiments show that refining the prior austenite grain size can either accelerate or decelerate bainite formation in steels, kinetic models based on the successive nucleation of bainitic ferrite subunits can only predict an acceleration. In this work we develop a physically-based model for bainite kinetics assuming a displacive growth mechanism which is able to reproduce both faster and slower bainite formation kinetics induced by austenite grain refinement. A theoretical analysis of the model and comparison against published experimental data show that slower kinetics for smaller grains is favored as the difference between the activation energy for grain boundary and autocatalytic nucleation of bainite increases, and as the austenite grain refinement results in finer bainite sub-units. We also theoretically analyze the density of initially present potential nucleation sites for bainite and show that the values of density used in other published bainite nucleation models are mostly underestimated. After using physically consistent values for the density of potential nucleation sites, we were able to calculate the apparent lengthening rate of bainite sheaves which were in line with experimentally measured lengthening rates.
help_outline