Measuring heat transfer processes in gully pots for real-time estimation of accumulated sediment depths

Journal Article (2024)
Author(s)

Manuel Regueiro-Picallo (Universidade da Coruña)

Antonio Moreno-Ródenas (TU Delft - Sanitary Engineering, Deltares)

Franҫois Clemens-Meyer (Norwegian University of Science and Technology (NTNU), SkillsInMotion B.V.)

Research Group
Sanitary Engineering
DOI related publication
https://doi.org/10.1039/d4ew00389f
More Info
expand_more
Publication Year
2024
Language
English
Research Group
Sanitary Engineering
Issue number
10
Volume number
10
Pages (from-to)
2392-2405
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

The accumulation of sediments in stormwater systems negatively affects their functioning. For example, the re-suspension of these sediments can lead to serious pollution of surface water bodies through combined sewer overflows (CSOs). In addition, the persistent accumulation of sediments reduces the storage and hydraulic capacity of stormwater systems, resulting in an increased risk of flooding. Stormwater managers spend considerable resources cleaning these systems, but we still lack reliable and easy-to-use monitoring methods to provide information on the location, volume and composition of sediments. This study explores the use of temperature sensors combined with the analysis of heat transfer processes to measure sediment depth in sand trap gully pots. To this end, a laboratory-scale experimental campaign was carried out using a 1 : 1 scale gully pot model, with different sediment types, hydrographs and inflow temperature conditions. The experiments were designed using field measurements to reproduce the temperature changes in gully pots and thus the heat transfer processes. The results showed maximum differences between reference measurements and estimated depths of less than 30 mm. Finally, the use of temperature sensors as a cost-effective solution for monitoring sediment accumulation is discussed.