A novel residual stress model for welded I-sections

Abstract

Residual stresses resulting from the fabrication of welded steel beams have a significant influence on the stability behaviour of steel members. To consider them in advanced numerical simulations, the models according to ECCS publication no. 33 or prEN1993–1-14 are commonly used. While the ECCS model was developed for steel grades S235 and S355, this model was also adapted in prEN1993–1-14 for the application to high-strength steels and scaled with the yield strength of the material. However, numerous investigations show that these models do not adequately represent existing residual stresses. This paper presents experimental studies of residual stresses conducted at the University of Coimbra and Ruhr-Universität Bochum. Based on these measurements, the influencing parameters on residual stresses were identified and subsequently a novel model for the representation of residual stresses was developed. The model was validated with an extensive data set from residual stress measurements from the last 50 years considering steel grades S235 to S890. Finally, numerical stability analyses were executed to investigate the effects of different residual stress approaches on the load-bearing behaviour of steel columns and beams.