Chemical free ammonium recovery and acid regeneration using bipolar membrane electrodialysis under high temperature, high concentration and different pH conditions
E.M.C. van Berlo (TU Delft - Applied Sciences)
H Spanjers – Mentor (TU Delft - Sanitary Engineering)
Jules van Lier – Mentor (TU Delft - Sanitary Engineering)
D.A. Vermaas – Mentor (TU Delft - ChemE/Transport Phenomena)
D. Narayen – Mentor (TU Delft - Sanitary Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
The abundant presence of nitrogen in natural waters can be a threat to both humans and environment. Therefore, municipal and industrial wastewater streams need to be treated before their disposal in the environment. Currently used biological and physical-chemical treatment methods have drawbacks such as high greenhouse gas emissions, high energy use and high use of chemicals. This research used bipolar membrane electrodialysis (BPMED) as a technology for the removal of ammonium sulfate from industrial wastewaters with extreme characteristics. The industrial stripper/scrubber system removing nitrogen from industrial waters creates an ammonium sulfate rich water stream with a pH of 2, a temperature of 70 degrees Celsius and concentrations up to 250 g/L. The study investigated the influence of a low pH, high concentration and high temperature on the removal of ammonium and sulfate from wastewater and in situ generation of sulfuric acid and production of ammonium hydroxide. Key performance parameters to measure the influence of these extreme conditions were the efficiency of nitrogen removal in the form of ammonium current efficiency and ammonium removal efficiency}) and sulfate removal removal efficiency. Other key performance parameters of interest were the consumed energy for this removal in the form of electrochemical energy consumption, the purity of the generated acid and base and the final ammonium concentration in the base and the sulfate concentration in the acid. Model wastewater with a pH between 2 and 10, a concentration between 50 - 250 g/L ammonium sulfate and with a temperature between 20 degrees Celsius and 40 degrees Celsius was treated with BPMED. The influence of pH, concentration and temperature was researched independently in experiments of 180 minutes, after which the removal efficiency and the quality of the produced acid and base were assessed.