Oil Recovery by Alkaline-Surfactant-Foam (ASF) Flooding: Effect of Drive Foam Quality on Oil Bank Propagation

Conference paper (2018)

Authors

M.T.G. Janssen Reservoir Engineering - CEG
P.L.J. Zitha Reservoir Engineering - CEG
Rashidah Pilus Universiti Teknologi Petronas
Research Group
Reservoir Engineering (CEG) (TU Delft)
Oil Enhanced Oil Recovery (EOR) Chemical EOR Foam EOR Core-flood Alkaline-Surfactant-Foam Gas EOR
More Info
expand_more

Published Date

14-04-2018

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Civil Engineering & Geosciences

Department

Geoscience and Engineering

Research Group

Reservoir Engineering

Abstract

Alkaline-Surfactant-Foam flooding is a novel enhanced oil recovery process which increases oil recovery over water flooding by combining lowering of the oil-water interfacial tension by two to three orders of magnitude and foaming. We report an experimental study of the formation of the oil bank and its displacement by foam drives of varying qualities. Experiments include: (a) bulk phase behaviour and foam testing studies using n-hexadecane and a single internal olefin sulfonate surfactant which was found to lower the oil-water interfacial tension by at least two orders of magnitude and (b) series of CT scanned core-floods using Bentheimer sandstone cores. A major goal of this study was to investigate the effect of drive foam quality on oil bank displacement. Core-flood results, performed at under-optimum salinity conditions yielding an oil-water interfacial tension in the order of 10-1 mN/m, showed similar ultimate oil recovery factors for the range of drive foam qualities studied. Although the total oil recovery is not affected by drive foam quality, results indicate a more frontal oil bank displacement at lower foam qualities. The findings in this study suggest that a) a lower drive foam quality favours oil bank displacement and b) the amount of clean oil produced by the oil bank is not effected by drive foam quality.