Optimizing densification and mechanical properties of spark plasma sintered ZrB2-SiC ceramic composites
Iason Krinis (Student TU Delft)
Prakhar Jindal (TU Delft - Space Systems Egineering)
V. Vera (TU Delft - Team Vera Popovich)
Hans J.C. Brouwer (TU Delft - Team Marcel Hermans)
Botchu Vara Siva Botchu (TU Delft - Space Systems Egineering)
Y. Tang (TU Delft - Group Tang)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This study investigates the impact of different powder milling methods on the densification and mechanical properties of ZrB2-SiC ceramic composites processed via spark plasma sintering (SPS). Powders were prepared using two ball milling techniques: tungsten carbide (WC) and conventional ZrO2. The densification behavior during SPS was monitored, and the sintered samples were evaluated for their relative density, hardness, fracture toughness, and flexural strength. Results show that WC milling significantly enhances densification, achieving 99.2 % relative density at 2100 °C/65 MPa/15 min, compared to 96.5 % for ZrO2-milled samples. This improvement is due to WC's sintering aid effect, which promotes grain boundary diffusion and particle packing. However, ZrO2-milled composites exhibit superior hardness (17.38 GPa) and fracture toughness (3.97 MPa m1/2), attributed to their refined grain structure and the absence of softer ZrO2 phases. Conversely, WC-milled samples show slightly higher flexural strength (384–516 MPa), likely due to the transformation toughening effect of the secondary ZrO2 phase. Overall, WC milling improves densification and flexural strength, while ZrO2 milling yields finer-grained composites with higher hardness and toughness, making it better suited for wear-resistant and mechanically demanding applications.
help_outline