Low-temperature oxidation-induced crack healing in Ti2Al0.5Sn0.5C–Al2O3 composites
Guoping Bei (Friedrich-Alexander-Universität Erlangen-Nürnberg, TU Delft - (OLD) MSE-1)
Mirza Mačković (Friedrich-Alexander-Universität Erlangen-Nürnberg)
Erdmann Spiecker (Friedrich-Alexander-Universität Erlangen-Nürnberg)
Peter Greil (Friedrich-Alexander-Universität Erlangen-Nürnberg)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
The oxidation-induced crack healing of an Al2O3 composite loaded with various volume fractions of Ti2Al0.5Sn0.5C repair filler particles was investigated by annealing in air at a relatively low temperature of 700°C. After annealing a composite with 20 vol.% repair fillers (with a particle size of ~5.6 µm) for 48 hours, artificial indentation cracks prepared on the surface, as well as pores near the surface, were completely healed by filling with condensed oxidation products. Additionally, minor fraction of metallic Sn was detected. A complementary study by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy revealed that nano-sized oxidation products (SnO2, TiO2, and α-Al2O3 phase) were formed as major crack-filling species. After healing, the strength recovery of the Al2O3 composites was significantly improved in the composites loaded with more than 10 vol.% repair fillers and achieved 107% at 700 for 48 hours.