Lift Estimation from Wind Tunnel Wall Pressure

An experimental approach carried out at the Research & Development department of Econowind

Master Thesis (2026)
Author(s)

J.P. Tillie (TU Delft - Aerospace Engineering)

Contributor(s)

F. Scarano – Mentor (TU Delft - Aerospace Engineering)

A. Daliri Rezagholigheshlaghi – Mentor (TU Delft - Aerospace Engineering)

Faculty
Aerospace Engineering
More Info
expand_more
Publication Year
2026
Language
English
Graduation Date
19-11-2026
Awarding Institution
Delft University of Technology
Programme
Aerospace Engineering
Faculty
Aerospace Engineering
Page Views
16
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

At Econowind, wind-tunnel testing is used to evaluate the aerodynamic performance of boundary-layer suction wings, with lift primarily determined through wall pressure measurements (WPM).
A baseline experiment was conducted using a NACA0015 airfoil without suction. Lift coefficients obtained from WPM were compared with independently derived surface pressure measurements (SPM) at Reynolds numbers of Re=200,000, Re=400,000, and Re=600,000.
The results show good agreement between WPM and SPM in the pre-stall regime, while discrepancies increase around stall and become substantial in the post-stall region, where WPM consistently overpredicts lift relative to SPM.
Further analysis revealed that the measured wall-pressure footprint alone yields lift estimates close to those obtained from SPM in the post-stall regime, whereas the existing corrections and empirical extrapolations generally lead to overprediction.
These findings demonstrate the potential of WPM for lift estimation under predominantly attached-flow conditions while identifying strongly separated flow as a major limitation of the current approach.

Files

License info not available