Soft pneumatic grippers

Abstract

Typically, heuristic/trial-based approaches are used to design soft pneumatic grippers (SPGs). This paper presents a systematic topology optimization framework for developing SPGs. The design-dependent nature of actuating load is modeled using Darcy's law with an added drainage term. A 2D soft arm unit is then optimized as a compliant mechanism under pneumatic loading. To ensure the design is robust and manufacturable, the problem is formulated as a min-max optimization, where output deformations of blueprint and eroded designs are considered. A volume constraint is imposed on the blueprint part, while a strain-energy constraint is enforced on the eroded part. The Method of Moving Asymptotes is employed to solve optimization problems. The optimized 2D part is extruded suitably to generate a 3D unit. Ten such 3D units are assembled to create a gripper arm. Both the optimized 2D unit and the corresponding gripper arm outperform their conventional rectangular designs under pneumatic loading, demonstrating the efficacy of the proposed approach. The arms are fabricated using the SLA printing technique. Numerical and experimental results are compared at different pneumatic loads. Four 3D-printed arms are integrated with a supporting structure to form the SPG. The gripping action of the SPG is demonstrated on objects with different weights, sizes, structures, stiffnesses, and shapes.