Fluidization behavior of stirred gas–solid fluidized beds
A combined X-ray and CFD–DEM–IBM study
P.C. van der Sande (TU Delft - ChemE/Product and Process Engineering)
M.J.A. de Munck (Eindhoven University of Technology)
K. Wu (TU Delft - ChemE/Product and Process Engineering)
D.R. Rieder (Eindhoven University of Technology)
D.E.A. van den Eertwegh (Eindhoven University of Technology)
E.C. Wagner (TU Delft - ChemE/O&O groep)
G.M.H. Meesters (TU Delft - ChemE/Product and Process Engineering)
E.A.J.F. Peters (Eindhoven University of Technology)
J.A.M. Kuipers (Eindhoven University of Technology)
J.R. van Ommen (TU Delft - ChemE/Product and Process Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Stirred gas–solid fluidized bed reactors are commercially employed in polyolefin manufacturing, but the complex gas–solid contacting dynamics pose challenges in design, scale-up, and operation. In this study, the influence of agitation on the fluidization performance of Geldart B particles was investigated experimentally by X-ray imaging and pressure drop measurements and numerically by Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) - Immersed Boundary Method (IBM). The experimentally obtained minimum fluidization curve and time-averaged pressure drop show good qualitative agreement with the simulation results. Visual observations underscore that an increase in the angular velocity of the agitator results in reduced bubble size and improved bed homogeneity, as further evidenced by reduced pressure fluctuations. Furthermore, the simulations reveal that while the impeller enhances solids agitation, a proper design study is imperative, considering that static immersed bodies, such as the stirrer shaft, can adversely impact solids motion.
help_outline