Design and power calculation of HLFC suction system for a subsonic short-range aircraft

Design and power calculation of HLFC suction system for a subsonic short-range aircraft

Prasannakumar, Adarsh (Technical University of Braunschweig)
Wolff, Johannes (Technical University of Braunschweig)
Radespiel, Rolf (Technical University of Braunschweig)
Boermans, L.M.M. (TU Delft Aerodynamics)
Hühne, Christian (Technical University of Braunschweig)
Badrya, Camli (Technical University of Braunschweig)

2022

Hybrid laminar flow control (HLFC) can be a possible solution for future sustainable energy-efficient aviation. The current study proposes a MATLAB-based numerical tool for the design of the suction system for an airfoil optimized for a subsonic short-range HLFC application. Considerable energy losses may occur when the air passes through the perforated metallic outer surface and the inner structure of the suction system. A semi-empirical approach is used to design a layout that provides a target suction velocity based on measured pressure losses through porous medium and substructures. Flowbench measurements were performed on 3D-printed internal core test samples to quantify the pressure losses that can be used to create a lower pressure below the porous sheet matching the target suction velocity. The actual suction realized on the airfoil using this substructure concept has a discrete nature that increases with the distance between two adjacent walls. Finally, the suction system’s power requirement is calculated. The power requirement for distributed suction accounts for the pressure loss characteristics of the porous material, the internal core structure, and throttling holes. However, the study does not include the ducting losses from the substructure to the compressor. Approximately 80% of the total suction power is utilized to eject the sucked air back to the freestream conditions for a system with a compressor and propulsive system efficiency equal to one. The study analyses the performance of the designed internal core layout to different flight conditions and addresses the suction power requirement variation with lift coefficient and flight altitude.

Boundary layer suction
HLFC
Internal structure
Laminar flow control
Suction power
Suction system
xHLFC

http://resolver.tudelft.nl/uuid:22549b40-e422-4cb9-bd7f-92ff93b62c5e

https://doi.org/10.1007/s13272-022-00614-1

1869-5582

CEAS Aeronautical Journal, 13 (4), 1003-1026

Institutional Repository

journal article

© 2022 Adarsh Prasannakumar, Johannes Wolff, Rolf Radespiel, L.M.M. Boermans, Christian Hühne, Camli Badrya