Print Email Facebook Twitter Response regimes in the fluid–structure interaction of wall turbulence over a compliant coating Title Response regimes in the fluid–structure interaction of wall turbulence over a compliant coating Author Greidanus, A.J. (TU Delft Fluid Mechanics) Delfos, R. (TU Delft Energy Technology) Picken, S.J. (TU Delft ChemE/Advanced Soft Matter) Westerweel, J. (TU Delft Fluid Mechanics) Date 2022 Abstract The interaction between a turbulent boundary layer flow and compliant surfaces is investigated experimentally. Three viscoelastic coatings with different material stiffnesses are used to identify the general surface response to the turbulent flow conditions. For the softest coating, the global force measurements show two obvious regimes of interaction with an indicated transition at Ub/Ct∼3.5, where Ub is the bulk flow velocity and Ct is the coating shear velocity. The one-way coupled regime shows friction values comparable to those of the rigid wall, while the two-way coupled regime indicate a significant increase in fluid friction. Within the one-way coupled regime for Ub/Ct>1.2, the flow measurements show a low level of two-way coupling represented by the change of the velocity profile as well as the increase in the Reynolds stresses in the near-wall region. This is supported by the surface deformation measurements. Initially, the turbulent flow structures induce only an imprint on the coating surface, while a change in surface response occurs when the surface wave propagation velocity cw equals the shear wave velocity of the coating Ct (i.e. cw/Ct∼1). Above Ub/Ct>1.2, a growth in wavelength is observed with increasing flow velocity, most probably due to the surface wave formation generated downstream the pressure features of the flow. The surface response is stable and correlates with the high-intensity turbulent pressure fluctuations in the turbulent boundary layer, with a wave propagation velocity cw∼0.7–0.8Ub. Within the two-way coupled regime, additional fluid motions and a downward shift in the logarithmic region of the velocity profile are observed due to substantial surface deformation and confirm the frictional drag increase. Another type of surface response is initiated by phase-lag instability in combination with surface undulations that start to protrude the viscous sublayer, where the propagation velocity of surface wave trains is cw∼0.17–0.18Ub. To reference this document use: http://resolver.tudelft.nl/uuid:5357b1cd-1996-4a83-be47-dbae44b54cf0 DOI https://doi.org/10.1017/jfm.2022.774 ISSN 0022-1120 Source Journal of Fluid Mechanics, 952 Part of collection Institutional Repository Document type journal article Rights © 2022 A.J. Greidanus, R. Delfos, S.J. Picken, J. Westerweel Files PDF response_regimes_in_the_f ... oating.pdf 3.57 MB Close viewer /islandora/object/uuid:5357b1cd-1996-4a83-be47-dbae44b54cf0/datastream/OBJ/view