Hollow Core Cross-Laminated Timber

Hollow Core Cross-Laminated Timber: Optimized for a more efficient use of material

van Aken, Bart (TU Delft Civil Engineering and Geosciences; TU Delft Engineering Structures)

van de Kuilen, Jan-Willem (mentor)
Ravenshorst, Geert (graduation committee)
Gard, Wolfgang (graduation committee)
Hoogenboom, Pierre (graduation committee)
Houben, Lambert (graduation committee)

Delft University of Technology

2017-07-03

Wood is an important building material that has been used for thousands of years throughout the world. It is the most widely used building material and due to its characteristics suitable for a wide range of applications. Still, for the last century steel and concrete have been the materials of choice for large buildings. Part of the reason for this is the lack of knowledge in the industry regarding timber construction. Now that the environmental problems such as climate change get more and more attention, there is an opportunity for timber as a building material and the manufacturers of timber products to increase its popularity.
Cross-Laminated Timber, or CLT, is a relatively new product. First introduced in the early 1990’s in Austria and Germany, now gaining popularity in residential and non-residential applications in several countries around the world. The panels normally have 3 or more layers of side-by-side placed boards, that are stacked crosswise at a 90 degree angle. The boards are glued on their wide faces and may or may not be glued together on their narrow faces.
The Derix Group, a company with a vast experience in the timber industry, specializes in laminated timber constructions and are interested in developing a new panel configuration. The idea is that by relocating boards from the middle layer of a CLT element, to a more favourable position, material usage can be optimized.
A problem definition is formulated and used to derive the research questions that form the direction of the thesis. The research questions are related to the possible advantages and the consequences of the Hollow Core Cross-Laminated Timber (HCCLT) configuration.
The first thing that is done in order to investigate the possibilities, is research into the manufacturing process and the structural design of CLT. As a relatively flexible building material with a low dead weight, the design of CLT is often determined by serviceability criteria, such as deformation and vibration. However, the rolling shear properties of the cross-layers can control the design, it influences the effective bending stiffness and stress distribution. It also causes a larger deformation due to shear than for other wood based products. Since there is not one specific design method, the most common methods are researched and described.
 The composite theory
 The mechanically jointed beams theory
 The shear analogy

To determine how the existing methods perform and to investigate the structural behaviour of a HCCLT element compared to a CLT element, the methods are used to calculate different configurations in order to compare the results.
The knowledge obtained during the research and calculations is then used to model a HCCLT element. Different models are made in order to investigate the behaviour during manufacturing and for when the element is in use.

Timber
Cross laminated Timber
Hollow core
Structural design
Manufacturing
CLT

http://resolver.tudelft.nl/uuid:601f038b-d231-47e9-85a4-8d7eba44acd1

Student theses

master thesis

© 2017 Bart van Aken