Print Email Facebook Twitter Optical Simulation-Aided Design and Engineering of Monolithic Perovskite/Silicon Tandem Solar Cells Title Optical Simulation-Aided Design and Engineering of Monolithic Perovskite/Silicon Tandem Solar Cells Author Zhao, Y. (TU Delft Photovoltaic Materials and Devices) Datta, Kunal (Eindhoven University of Technology) Paggiaro, Giulia (Student TU Delft) Liu, Hanchen (Student TU Delft) Fardousi, Mohua (Student TU Delft) Santbergen, R. (TU Delft Photovoltaic Materials and Devices) Procel Moya, P.A. (TU Delft Photovoltaic Materials and Devices) Han, C. (TU Delft Photovoltaic Materials and Devices) Yang, G. (TU Delft Photovoltaic Materials and Devices) Weeber, A.W. (TU Delft Photovoltaic Materials and Devices; TNO Energy Transition) Zeman, M. (TU Delft Photovoltaic Materials and Devices) Mazzarella, L. (TU Delft Photovoltaic Materials and Devices) Isabella, O. (TU Delft Photovoltaic Materials and Devices) Date 2023 Abstract Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation. We first engineered (i)a-Si:H passivating layers for (100)-oriented flat c-Si surfaces and combined them with various (n)a-Si:H, (n)nc-Si:H, and (n)nc-SiOx:H interfacial layers for SHJ bottom-cells. In a symmetrical configuration, a long minority carrier lifetime of 16.9 ms was achieved when combining (i)a-Si:H bilayers with (n)nc-Si:H (extracted at the minority carrier density of 1015 cm-3). The perovskite sub-cell uses a photostable mixed-halide composition and surface passivation strategies to minimize energetic losses at charge-transport interfaces. This allows tandem efficiencies above 23% (a maximum of 24.6%) to be achieved using all three types of (n)-layers. Observations from experimentally prepared devices and optical simulations indicate that both (n)nc-SiOx:H and (n)nc-Si:H are promising for use in high-efficiency tandem solar cells. This is possible due to minimized reflection at the interfaces between the perovskite and SHJ sub-cells by optimized interference effects, demonstrating the applicability of such light management techniques to various tandem structures. Subject optical simulationsperovskitesilicon heterojunctiontandem solar cellstwo-terminal To reference this document use: http://resolver.tudelft.nl/uuid:92bc922c-49eb-4ca7-904c-890516a1b2ec DOI https://doi.org/10.1021/acsaem.3c00136 ISSN 2574-0962 Source ACS Applied Energy Materials, 6 (10), 5217-5229 Part of collection Institutional Repository Document type journal article Rights © 2023 Y. Zhao, Kunal Datta, Giulia Paggiaro, Hanchen Liu, Mohua Fardousi, R. Santbergen, P.A. Procel Moya, C. Han, G. Yang, A.W. Weeber, M. Zeman, L. Mazzarella, O. Isabella, More Authors Files PDF acsaem.3c00136.pdf 4.45 MB Close viewer /islandora/object/uuid:92bc922c-49eb-4ca7-904c-890516a1b2ec/datastream/OBJ/view