C<sup>1</sup> Cohesive Element Models for 3D Delamination

Towards overcoming the mesh density constraint in FE delamination analyses

Master thesis (2019)

Authors

G. Tosti Balducci Aerospace Engineering

Contributors

B. Y. Chen Aerospace Structures & Computational Mechanics - Aerospace Engineering (supervisor 1)
Faculty
Aerospace Engineering
Copyright: © 2019 Giorgio Tosti Balducci
More Info
expand_more

Published Date

24-05-2019

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Aerospace Engineering

Abstract

The wide adoption of composite structures in the aerospace industry asks for reliable numerical methods to account for the effects of damage, among which delamination. Cohesive elements (CEs) are a versatile and physically representative way of reproducing delamination, but, using their standard form, at least 3 elements are required in the narrow cohesive zone, hindering the applicability in practical scenarios. This limitation is due to the inability of
current models to capture the deformation of the delaminating substrates. The present work focuses on the implementation and testing of triangular thin plate substrate elements and compatible cohesive elements, which satisfy C1-continuity at their boundary. The improved regularity meets the continuity requirement coming from the Kirchhoff Plate Theory and the triangular shape allows for conformity to complex geometries. After verification of plate and
cohesive element singularly, the overall model is validated for mode I delamination. Very accurate predictions of the limit load and crack propagation phase are found, using CEs as large as 11 times the cohesive zone.