Chemical characterizations and molecular dynamics simulations on different rejuvenators for aged bitumen recycling

Chemical characterizations and molecular dynamics simulations on different rejuvenators for aged bitumen recycling

Ren, S. (TU Delft Pavement Engineering)
Liu, X. (TU Delft Pavement Engineering)
Lin, P. (TU Delft Pavement Engineering)
Erkens, S. (TU Delft Pavement Engineering)
Gao, Y. (TU Delft Pavement Engineering)

2022

Molecular dynamics (MD) simulation is an advanced tool to explore the interaction mechanism between aged bitumen and rejuvenators at the nanoscale. However, the general MD molecular structures of rejuvenators led to the lower quantify and inaccuracy of the simulation outputs. This study aims at developing more realistic molecular models to represent the generic rejuvenators for MD simulation of aged bitumen recycling. Four types of rejuvenators (bio-oil, engine-oil, naphthenic-oil, and aromatic-oil) are characterized in terms of element analysis, functional groups distribution observed from Attenuated total reflectance-Fourier-transform infrared (ATR-FTIR) spectroscopy, and average molecular weight. Afterward, the average molecular structures of rejuvenators are determined and validated. Further, the MD simulations are performed to predict the energetic, dynamic, volumetric,
and structural properties of various rejuvenators. Based on the chemical characteristics, the average chemical formula of bio-oil, engine-oil, naphthenic-oil, and aromatic-oil is derived as C19H36O2, C22H44, C26H48, C30H40. From MD simulations, the ranking of density and glass transition temperature for four different rejuvenators is AO > NO > BO > EO, which is same as the experimental results. It proves that the established average molecular structures of four rejuvenators are reasonable. Various rejuvenators display different thermodynamics and structural properties. The aromatic-oil exhibits the highest potential energy, cohesive energy density, and solubility parameter. Besides, the order of expansion coefficient and diffusion coefficient of the four rejuvenators is the same as BO > EO > NO > AO, while the viscosity presents the opposite sequence. Moreover, the fractional free volume values follow EO > BO > NO > AO. The occurrence probability between bio-oil and aromatic-oil molecules is higher than engine-oil and naphthenic-oil. This study develops the representative average molecular models for generic rejuvenators and helps understand the difference in chemo-physical and thermodynamics properties among various rejuvenators.

Molecular models
Rejuvenators
Chemical characterizations
Molecular dynamics simulation
Thermodynamics properties

http://resolver.tudelft.nl/uuid:a81a0777-c50e-48e9-a825-1f17eb879fe8

https://doi.org/10.1016/j.fuel.2022.124550

0016-2361

Fuel: the science and technology of fuel and energy, 2022 (324), 1-17

Institutional Repository

journal article

© 2022 S. Ren, X. Liu, P. Lin, S. Erkens, Y. Gao