Searched for: +
(61 - 80 of 220)

Pages

document
Hopf, Y.M. (author), Ossenkoppele, B.W. (author), Soozande, M. (author), Noothout, E.C. (author), Chang, Z.Y. (author), Vos, H.J. (author), Bosch, Johan G. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)
In this letter, a compact high-voltage (HV) transmit circuit for dense 2-D transducer arrays used in 3-D ultrasonic imaging systems is presented. Stringent area requirements are addressed by a unipolar pulser with embedded transmit/receive switch. Combined with a capacitive HV level shifter, it forms the ultrasonic HV...
journal article 2022
document
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)
This research studies the impact of localized damage and deformed printing geometry on the structural failure of plastic collapse for 3D concrete printing (3DCP) using the lattice model. Two different approaches are utilized for buildability quantification: the (previously developed) load-unload method, which updates and relaxes the printing...
journal article 2022
document
Dong, J. (author), Lin, P. (author), Putra, N.E. (author), Tümer, N. (author), Leeflang, M.A. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Chang, J. (author), Zadpoor, A.A. (author), Zhou, J. (author)
The treatment of femoral nonunion with large segmental bone defect is still challenging. Although magnesium alloys have been considered potential materials for such a treatment, their application is limited by their fast degradation. Adding bioceramic particles into magnesium to form Mg-matrix composites is a promising strategy to adjust...
journal article 2022
document
Qian, N. (author), Chang, Guobin (author), Gao, Jingxiang (author), Shen, Wenbin (author), Yan, Z. (author)
Filtering for GRACE temporal gravity fields is a necessary step before calculating surface mass anomalies. In this study, we propose a new denoising and decorrelation kernel (DDK) filtering scheme called adaptive DDK filter. The involved error covariance matrix (ECM) adopts nothing but the monthly time‐variable released by several data...
journal article 2022
document
Chang, L. (author), Rots, J.G. (author), Esposito, R. (author)
Perforated unreinforced masonry (URM) walls in out-of-plane (OOP) two-way bending are commonly encountered in natural hazard investigations. However, related research is rather limited. This study focuses on the influence of openings on the two-way bending capacity of URM walls. An experimental database about the perforated URM walls in OOP...
journal article 2022
document
Gu, Guanjie (author), Yang, Changgui (author), Li, Zhuhao (author), Feng, Xiangdong (author), Chang, Ziyi (author), Wang, Ting-Hsun (author), Zhang, Yunshan (author), Luo, Yuxuan (author), Zhang, Hong (author), Wang, Ping (author), Du, S. (author), Chen, Yong (author), Zhao, Bo (author)
Body Channel Communication (BCC) offers a low-loss signal transmission medium for ultra-low-power wearable devices on human body [1]. However, the effective communication range on human body is limited to less than 1m in the state-of-the-art BCC transceivers [2], where the signal loss at the interface of body surface and BCC receiver remains to...
conference paper 2022
document
Guo, P. (author), Fool, F. (author), Noothout, E.C. (author), Chang, Z.Y. (author), Vos, H.J. (author), Bosch, Johan G. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)
The integration of 2D ultrasonic transducer arrays and pitch-matched ASICs has enabled the realization of various 3D ultrasound imaging devices in recent years [1]-[3]. As applications such as 3D intravascular ultrasonography, intra-cardiac echocardiography, and trans-fontanelle ultrasonography call for miniaturization and improved spatial...
conference paper 2022
document
Hopf, Y.M. (author), Ossenkoppele, B.W. (author), Soozande, M. (author), Noothout, E.C. (author), Chang, Z.Y. (author), Chen, C. (author), Vos, H.J. (author), Bosch, J.G. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)
Intra-cardiac echography (ICE) probes (Fig. 32.2.1) are widely used in electrophysiology for their good procedure guidance and relatively safe application. ASICs are increasingly employed in these miniature probes to enhance signal quality and reduce the number of connections needed in mm-diameter catheters [1]-[5]. 3D visualization in real...
conference paper 2022
document
Chang, Haoliang (author), Huang, Jianxiang (author), Yao, Weiran (author), Zhao, Weizun (author), Li, L. (author)
Urban rail development can increase land value, reduce commute time, and increase accessibility, as reported in the literature. However, little is known about the impact of opening urban rail transit stations on people's sentiment, particularly in the context of large metropolises where population density is significantly high. This paper...
journal article 2022
document
Lopez Rodriguez, B. (author), Chang, J. (author), Los, Johannes W.N. (author), Steinhauer, Stephan (author), Zwiller, Val (author), Esmaeil Zadeh, I.Z. (author)
Ultra-high system detection efficiency (SDE) s uperconducting nanowire single-photon detectors are demonstrated for a broad range of wavelengths, from UV to mid-infrared, opening novel possibilities in the fields of quantum photonics, neuroimaging and astronomy.
conference paper 2022
document
Chang, J. (author), Los, Johannes W.N. (author), Gourgues, Ronan (author), Steinhauer, Stephan (author), Dorenbos, S.N. (author), Pereira, S.F. (author), Urbach, Paul (author), Zwiller, Val (author), Esmaeil Zadeh, I.Z. (author)
Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection...
journal article 2022
document
Chang, X. (author), Wu, Jianjun (author), Correia, Gonçalo (author), Sun, Huijun (author), Feng, Ziyan (author)
Carsharing has become a popular travel mode owing to its convenience of use, easy parking, and low cost of using a car by those who only need it occasionally. However, because of the inadequate location of carsharing stations (station-based systems) or vehicles (free-floating systems), effectively requiring expensive and complex relocation...
journal article 2022
document
Chang, J. (author), De Breuker, R. (author), Wang, Xuerui (author)
This article exposes that although some sensor-based nonlinear fault-tolerant control frameworks including incremental nonlinear dynamic inversion control can passively resist a wide range of actuator faults and structural damage without requiring an accurate model of the dynamic system, their stability heavily relies on a sufficient...
journal article 2022
document
Chang, J. (author), Guo, Zongyi (author), De Breuker, R. (author), Wang, Xuerui (author)
The sensor-based Incremental Nonlinear Dynamic Inversion (INDI) control has shown promising robustness in the aerospace research field. This control framework only requires a partial knowledge of plant (control effectiveness) because of its usage of angular accelerations and actuator output measurements. However, there are still un-negligible...
journal article 2022
document
Liang, M. (author), Chang, Z. (author), Wan, Z. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
This study aims to provide an efficient and accurate machine learning (ML) approach for predicting the creep behavior of concrete. Three ensemble machine learning (EML) models are selected in this study: Random Forest (RF), Extreme Gradient Boosting Machine (XGBoost) and Light Gradient Boosting Machine (LGBM). Firstly, the creep data in...
journal article 2022
document
Liang, M. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This study aims to provide an efficient alternative for predicting creep modulus of cement paste based on Deep Convolutional Neural Network (DCNN). First, a microscale lattice model for short-term creep is adopted to build a database that contains 18,920 samples. Then, 3 DCNNs with different consecutive convolutional layers are built to learn...
journal article 2022
document
Chang, J. (author), De Breuker, R. (author), Wang, Xuerui (author)
Incremental control, including incremental nonlinear dynamic inversion (INDI) and incremental backstepping (IBS), is a sensor-based control framework that enhances the control robustness by exploiting sensor measurements. Although its effectiveness has been demonstrated on various aerospace systems, the explicit and quantifiable expression for...
conference paper 2022
document
Xin, Jianjian (author), Shi, Fulong (author), Fan, Shi (author), Jin, Qiu (author), Chang, X. (author)
The water impact of one and twin free-falling wedges is numerically investigated by a Cartesian grid multiphase flow model. The effects of the drop velocity and the gap distance on the hydrodynamic behaviors are parametrically investigated. The numerical model involves a radial basis function ghost cell method (RBFGCM) for treating moving...
journal article 2022
document
Chang, Z. (author), Wan, Z. (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Extrusion-based 3D concrete printing (3DCP) results in deposited materials with complex microstructures that have high porosity and distinct anisotropy. Due to the material heterogeneity and rapid growth of cracks, fracture analysis in these air-void structures is often complex, resulting in a high computational cost. This study proposes a...
journal article 2022
document
Chang, J. (author), De Breuker, R. (author), Wang, Xuerui (author)
journal article 2022
Searched for: +
(61 - 80 of 220)

Pages