- document
-
Chaves Figueiredo, S. (author), Romero Rodriguez, C. (author), Ahmed, Zeeshan Y. (author), Bos, Derk H. (author), Xu, Y. (author), Salet, Theo M. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Bos, Freek P. (author)Extrusion based additive manufacturing of cementitious materials has demonstrated strong potential to become widely used in the construction industry. However, the use of this technique in practice is conditioned by a feasible solution to implement reinforcement in such automated process. One of the most successful ductile materials in civil...journal article 2020
- document
-
Romero Rodriguez, C. (author), Deprez, Maxim (author), França de Mendonça Filho, F. (author), van Offenwert, Stefanie (author), Cnudde, Veerle (author), Schlangen, E. (author), Šavija, B. (author)Superabsorbent Polymers (SAP) have been recently subject of investigation as smart admixtures for cement-based materials. The properties of these polymers enable their use for internal curing, increasing freeze/thaw resistance, boosting autogenous self-healing and providing a crack self-sealing effect in cementitious composites. Except for...book chapter 2020
- document
-
Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)This paper reports an extended lattice model for printing process simulation of 3D printed cementitious materials. In this model, several influencing factors such as material and geometric nonlinearity are considered. Using this model, green strength of cementitious material is investigated, deformation and crack pattern can be derived, which...book chapter 2020
- document
-
Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Mechanical behavior of cementitious cellular composites (CCC) with auxetic behavior was investigated under uniaxial compression and cyclic loading. Three cellular structures with different geometrical parameters are designed and prepared by 3D printing technique. Meanwhile, plain mortar and fiber reinforced mortar are used as constituent...book chapter 2020
- document
-
Gao, Peng (author), Chen, Yang (author), Huang, Haoliang (author), Qian, Zhiwei (author), Schlangen, E. (author), Wei, Jiangxiong (author), Yu, Qijun (author)Concrete generally deforms and cracks in a non-uniform manner under drying-induced stress. This study used the lattice fracture model to simulate the drying-induced non-uniform deformations, stresses, and micro-crack propagation in concrete. Experiments were designed to validate the lattice fracture model, wherein the drying-induced non...journal article 2020
- document
-
Šavija, B. (author), Zhang, H. (author), Schlangen, E. (author)This work aims to understand deformation and fracture processes in blast furnace slag cement pastes made using CEM III/B which is commonly used in the Dutch infrastructure sector. First, based on our previous work on Portland cement pastes, a micromechanical model utilizing nanoindentation and X-ray computed tomography (CT) for input is...journal article 2020
- document
-
Romero Rodriguez, C. (author), França de Mendonça Filho, F. (author), Mercuri, L. (author), Gan, Y. (author), Rossi, E. (author), Anglani, G. (author), Antonaci, P. (author), Schlangen, E. (author), Šavija, B. (author)In this study, the interface between different types of bacteria-embedded self-healing polylactic acid capsules (PLA) and cement paste is investigated. Particularly, the changes in microstructure and mechanical properties of the interface with respect to bulk cement paste were studied. First, nanoindentation was performed to obtain maps of...journal article 2020
- document
-
Gao, Peng (author), Chen, Yang (author), Huang, Haoliang (author), Qian, Zhiwei (author), Schlangen, E. (author), Wei, Jiangxiong (author), Yu, Qijun (author)To assess the effect of relative humidity (RH) on drying-induced damage in concrete, the non-uniform strains and microcracks in concrete under different RH conditions were obtained using the digital image correlation (DIC) technique and lattice fracture model. The simulated non-uniform displacements were consistent with those captured using...journal article 2020
- document
-
Xu, Y. (author), Schlangen, E. (author), Lukovic, M. (author), Šavija, B. (author)This research presents an investigation of the compressive behavior of auxetic cementitious cellular composites (CCCs) using a combination of experiments and finite element (FE) simulations. Typical auxetic centrosymmetric geometry was used as unit cells for the cellular structure and fiber reinforced cementitious mortar were used as...journal article 2020
- document
-
Figueiredo, Stefan C. (author), van Overmeir, A.L. (author), Nefs, Karsten (author), Schlangen, E. (author), Salet, Theo A. M. (author), Šavija, B. (author), Suiker, Akke S. J. (author), Bos, Freek P. (author)Over the past few years, several studies have shown the potential of three-dimensional concrete printing (3DCP) for applications in building and civil engineering. However, only a few studies have compared the properties of the fresh printing material and the quality of the printed elements from different printing facilities. Variations in the...conference paper 2020
- document
-
Zhang, H. (author), Šavija, B. (author), Lukovic, M. (author), Schlangen, E. (author)This work proposes a method for numerically investigating the fracture mechanism of cement paste at the microscale based on X-ray computed tomography and nanoindentation. For this purpose, greyscale level based digital microstructure was generated by X-ray microcomputed tomography with a resolution of 2 μm/voxel length. In addition,...journal article 2019
- document
-
Xu, Y. (author), Zhang, H. (author), Šavija, B. (author), Chaves Figueiredo, S. (author), Schlangen, E. (author)A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...journal article 2019
- document
-
Lukovic, M. (author), Ye, G. (author), Schlangen, E. (author), van Breugel, K. (author)Infrastructure is ageing and we are facing a serious challenge on how to deal with it. One possible solution is to repair it, but the life of current concrete repairs, including all types of repairs and application of different materials, is not satisfactory and there is an urgent need for improvement. Understanding the damage development in a...conference paper 2019
- document
-
Romero Rodriguez, C. (author), Chaves Figueiredo, S. (author), França de Mendonça Filho, F. (author), Schlangen, E. (author), Šavija, B. (author)The potential of using phase change materials (PCM) in cementitious materials to mitigate damage due to thermal loadings has been recently focus of intensive research. In the case of PCM with transition temperatures near to the freezing point of water, their potential to delay frost in a cementitious matrix has been largely investigated through...conference paper 2019
- document
-
Mercuri, L. (author), Romero Rodriguez, C. (author), Xu, Y. (author), Chaves Figueiredo, S. (author), Mors, R.M. (author), Rossi, E. (author), Anglani, G. (author), Antonaci, P. (author), Šavija, B. (author), Schlangen, E. (author)Soft inclusions, such as capsules and other particulate admixtures are increasingly being used in cementitious materials for functional purposes (i.e. self-healing and self-sensing of concrete). Yet, their influence on the fracture behaviour of the material is sometimes overlooked and requires in-depth study for the optimization of mechanical...conference paper 2019
- document
-
Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Strain hardening cementitious composites are a class of cementitious materials showing metal-like (i.e. pseudo-plastic) behavior in tension due to their multiple cracking ability. This is commonly achieved through use of fiber reinforcement (such as PVA) or, similarly, textile reinforcement (TRC). Increasing the ductility is important in...conference paper 2019
- document
-
Xu, Y. (author), Šavija, B. (author), Schlangen, E. (author)Traditionally, mechanical properties of cementitious materials are designed<br/>“chemically”, namely by configuring their mix proportions. Owning to the development of 3D printing technology, “physical” tailoring the meso-structure of cementitious materials to design their mechanical properties becomes possible. In the present study,...conference paper 2019
- document
-
Zhang, H. (author), Schlangen, E. (author), Šavija, B. (author)This work aims to investigate the mechanical properties of the cement paste-aggregate interface by combining experimental and numerical approaches. The multi-phase interface microstructure was obtained by X-ray computed tomography (XCT) and submitted to a discrete fracture lattice model for fracture analysis. Apart from the modelling, a...conference paper 2019
- document
-
Chang, Z. (author), Zhang, H. (author), Schlangen, E. (author), Šavija, B. (author)The aim of this work is to investigate the fracture process of concrete under various boundary conditions. Although numerous concrete fracture tests have been reported, showing the failure behavior of concrete, their evaluation is ambiguous due to the limitations of specimen size and experimental conditions. Therefore, it is necessary to use...conference paper 2019
- document
-
Gan, Y. (author), Zhang, H. (author), Šavija, B. (author), Schlangen, E. (author), van Breugel, K. (author)Nanoindentation is usually used to investigate local elastic properties and hardness of materials. In this paper, the nanoindenter served as a loading tool to perform micro scale bending tests and measure the global response of micro-scale specimens. For testing, cement paste cantilever beams with a square cross-section of 300 μm × 300 μm were...conference paper 2019