Searched for: +
(81 - 100 of 251)

Pages

document
Roelvink, Y. (author)
In this report, we will focus on simulating galaxy observations with the Deep Spectroscopic High-redshift Mapper (DESHIMA). To do so, we will discuss and evaluate two main parts needed to accurately perform such a simulation:<br/><br/>Firstly, we will answer the question whether Time-dependent End-to-end Model for Post-process Optimization ...
bachelor thesis 2020
document
Chaturvedi, Rishabh (author)
Commercial greenhouse gas emissions from aviation are proliferating, as is the concern among freight carriers to minimize their carbon footprint. From a corporate point of view, the United Nations International Civil Aviation Organization ( ICAO) expects aircraft emissions to triple by 2050, with aviation accounting for 25% of the world's carbon...
master thesis 2020
document
Ognjanović, U. (author)
In this report we present a model to simulate the performance and robustness of the Charge-Resonance Check (CR-Check) in the Nitrogen-Vacancy (NV) center. The CR-Check is a routine which verifies that the charge state of the NV center is NV$^-$ and that the lasers, addressing the NV center, are on resonance with the optical lines. This is done...
bachelor thesis 2020
document
Bakker, B.J. (author)
Building models for an electric vehicles usage data set in order to simulate virtual populations of these electric vehicle users. With these simulated populations charging strategies for electric vehicle users could be developed in order to improve the use of electric vehicles. The modeling is done with copula functions, and are compared with...
bachelor thesis 2020
document
van der Steeg, J.J. (author)
With the increasing amount of container freight transport and the increasing size of container vessels, for the Port of Antwerp, the second largest container port in Europe, a critical task is port planning. A simulation model provides the means to gain proper insight in the effect of future expansions. Macomi, a company specialized in...
master thesis 2020
document
Athanasiadis, Omiros (author)
The question of how well in terms of safety can a driver take over control of an automated vehicle in response to an emergency situation is of crucial importance. Most of the studies performed so far focus on the drivers’ reaction times and the mechanisms behind the transition. In this study, an effort is made to incorporate the braking times...
master thesis 2020
document
Huijten, Esmee (author)
Ultra-wideband submillimeter observations are crucial to study the process of star and galaxy formation and for characterizing cosmic dust in the interstellar medium. The Deep Spectroscopic High-redshift Mapper 2.0 (DESHIMA 2.0) will use an integrated superconducting spectrometer chip with a 220-440 GHz band coverage and a spectral resolution of...
bachelor thesis 2020
document
Papachristos, George (author), van de Kaa, G. (author)
Standards competition is a complicated process influenced by a large number of factors and mechanisms. This article develops a simulation model that draws on current theory of standards competition dynamics and represents the interplay of strategic factors that firms can use to gain a competitive advantage. The model is used to reproduce four...
review 2020
document
De Klerk, Rick (author), Vegter, Riemer Jakobs K. (author), Goosey-Tolfrey, Vicky L. (author), Mason, Barry S. (author), Lenton, John P. (author), Veeger, H.E.J. (author), van der Woude, L.H.V. (author)
There are many ways to simulate handrim wheelchair propulsion in the laboratory. Ideally, these would be able to, at least mechanically, simulate field conditions. This narrative review provides an overview of the lab-based equipment used in published research and critically assesses their ability to simulate and measure wheelchair propulsion...
journal article 2020
document
Augusto da Silva, F. (author), Bagbaba, Ahmet Cagri (author), Sartoni, Sandro (author), Cantoro, Riccardo (author), Reorda, Matteo Sonza (author), Hamdioui, S. (author), Sauer, Christian (author)
The development of Integrated Circuits for the Automotive sector imposes on major challenges. ISO26262 compliance, as part of this process, entails complex analysis for the evaluation of potential random hardware faults. This paper proposes a systematic approach to identify faults that do not disrupt safety-critical functionalities and...
conference paper 2020
document
Augusto da Silva, F. (author), Bagbaba, Ahmet Cagri (author), Hamdioui, S. (author), Sauer, Christian (author)
The development of Integrated Circuits for the Automotive sector imposes on complex challenges. ISO26262 Functional Safety requirements entail extensive Fault Injection campaigns and complex analysis for the evaluation of deployed Software Tools. This paper proposes a methodology to improve Fault Analysis Tools Confidence Level (TCL) by...
conference paper 2020
document
Overtoom, Irene (author), Correia, Gonçalo (author), Huang, Yilin (author), Verbraeck, A. (author)
New developments in the automotive world have the power to change mobility, but because of high uncertainties, municipalities are adopting a wait-and-see attitude. Nonetheless, autonomous, connected and shared vehicle technologies are in a far stage of development and it is only a matter of time before shared autonomous vehicles (SAVs) enter...
journal article 2020
document
Ganni, S. (author), Li, M. (author), Botden, Sanne M.B.I. (author), Nayak, Samir Ranjan (author), Ganni, Bhaskar Rao (author), Rutkowski, Anne Francoise (author), Goossens, R.H.M. (author), Jakimowicz, J.J. (author)
Virtual reality (VR) training is widely used in several minimal invasive surgery (MIS) training curricula for procedural training. However, VR training in its current state lack immersive training environments, such as using head-mounted displays that is implemented in military or aviation training and even entertainment. The virtual...
journal article 2020
document
Endo, A. (author), Pascual Laguna, A. (author), Hähnle, S.A. (author), Karatsu, K. (author), Thoen, David (author), Murugesan, V. (author), Baselmans, J.J.A. (author)
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance....
conference paper 2020
document
Zhang, Wenjuan (author), Diab, Waleeb (author), Hajibeygi, H. (author), Al Kobaisi, Mohammed (author)
Modeling flow and transport in fractured porous media has been a topic of intensive research for a number of energy- and environment-related industries. The presence of multiscale fractures makes it an extremely challenging task to resolve accurately and efficiently the flow dynamics at both the local and global scales. To tackle this challenge,...
journal article 2020
document
Cooke, R.M. (author), Marti, Deniz (author), Mazzuchi, Thomas (author)
Post-2006 expert judgment data has been extended to 530 experts assessing 580 calibration variables from their fields. New analysis shows that point predictions as medians of combined expert distributions outperform combined medians, and medians of performance weighted combinations outperform medians of equal weighted combinations. Relative...
journal article 2020
document
Anand, C. (author), Groves, R.M. (author), Shroff, S. (author), Benedictus, R. (author)
In this paper we ultrasonic signals from array transducers are simulated using the Thompson and Gray measurement model. The measurement model consists of a beam model, a system efficiency factor which characterizes the response of the electro-mechanical and electrical components of the system, and a flaw scattering model. To inspect layered...
conference paper 2020
document
Qiu, S. (author), Bozzon, A. (author), Houben, G.J.P.M. (author)
This demo presents VirtualCrowd, a simulation platform for crowdsourcing campaigns. The platform allows the design, configuration, step-by-step execution, and analysis of customized tasks, worker profiles, and crowdsourcing strategies. The platform will be demonstrated through a crowd-mapping example in two cities, which will highlight the...
conference paper 2020
document
van Bilsen, Daniël (author), Huang, Yilin (author), Li, Fen (author)
China is undergoing large changes to tackle carbon dioxide emissions and air pollution. While the top-down governance allows for clear setting of emission reduction targets for industrial sectors and major cities, reducing emissions in residential sectors in smaller (the so-called low-tier) cities remain challenging and often unaddressed. This...
conference paper 2020
document
Huijten, Esmee (author), Roelvink, Yannick (author), Brackenhoff, Stefanie A. (author), Bakx, Tom J.L.C. (author), Zaalberg, Stan (author), Baselmans, J.J.A. (author), Karatsu, K. (author), van Hoven, M.B. (author), Endo, A. (author)
The next technological breakthrough in millimeter-submillimeter astronomy is 3D imaging spectrometry with wide instantaneous spectral bandwidths and wide fields of view. The total optimization of the focal-plane instrument, the telescope, the observing strategy, and the signal-processing software must enable efficient removal of foreground...
conference paper 2020
Searched for: +
(81 - 100 of 251)

Pages