Searched for: +
(41 - 60 of 285)

Pages

document
Zhu, G. (author), Dong, J. (author), Grazian, F. (author), Bauer, P. (author)
This article presents a parameter recognition-based impedance tuning method for the impedance mismatch caused by capacitance drift and coil misalignment in series-series-compensated wireless power transfer (WPT) systems. First, a parameter recognition method is proposed to identify the unknown parameters of the resonant circuits by only...
journal article 2023
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Yao, Yu (author), Dong, J. (author)
In this article, a new analytical model for predicting the magnetic field of the U-shaped interior permanent magnet motor (IPMM) is proposed. In the polar coordinates, rectangular permanent magnets are equivalent to the combination of consistent fan-shaped subdomains, and after that, the Laplace or Poisson equation of each solution domain can...
journal article 2023
document
Li, Ruohan (author), Dong, Y. (author)
Lane detection is crucial for vehicle localization which makes it the foundation for automated driving and many intelligent and advanced driving assistant systems. Available vision-based lane detection methods do not make full use of the valuable features and aggregate contextual information, especially the interrelationships between lane...
journal article 2023
document
Ruan, Tiancheng (author), Wang, Hao (author), Jiang, Rui (author), Li, Xiaopeng (author), Xie, N. (author), Xie, Xinjian (author), Hao, Ruru (author), Dong, Changyin (author)
Urged by a close future perspective of a traffic flow made of a mix of human-driven vehicles and automated vehicles (AVs), research has recently focused on studying the traffic flow characteristics of Adaptive Cruise Controls (ACCs), the most typical AV. However, in most works, the ACC system is studied under a simplifying and unrealistic...
journal article 2023
document
Dong, Yicong (author), Dowling, K.M. (author), Ghandiparsi, Soroush (author), Voss, Lars (author), Rakheja, Shaloo (author)
In this work, we demonstrate and model the deep-level defect physics of semi-insulating gallium arsenide bulk photoconductive semiconductor switches (PCSS) with gap size of 10 μ and 25 μ in dark-mode operation. Experimental measurements up to biasing field of 10 kV/cm show near-bistable characteristics in the dark-mode current-voltage...
journal article 2023
document
Zhang, Li (author), Dong, Y. (author), Farah, H. (author), van Arem, B. (author)
The gradual deployment of automated vehicles (AVs) results in mixed traffic where AVs will interact with human-driven vehicles (HDVs). Thus, social-aware motion planning and control while considering interactions with HDVs on the road is critical for AVs’ deployment and safe driving under various maneuvers. Previous research mostly focuses on...
poster 2023
document
Chen, Bei (author), Yu, Xin (author), Dong, Fuqiang (author), Wu, Wenxiu (author), Zu, Yuanzhe (author), Ren, S. (author)
High-viscosity modified asphalt (HVMA) is the most commonly applied method in drainage asphalt pavements. However, some disadvantages of hot-mix HVMA, including high energy consumption and unavoidable environmental pollution, should be improved. Therefore, warm-mix additive (WMA) was introduced. In this paper, the effects of WMA on the...
journal article 2023
document
Dong, Fuqiang (author), Wang, Jincheng (author), Yu, Xin (author), Jiang, Mengmeng (author), Guo, Yongjia (author), Wang, Shiyu (author), Zu, Yuanzhe (author), Ren, S. (author)
In this study, the environmentally friendly rejuvenators with waste thermal conductive oil, polymer, and the interfacial reinforcing agent were prepared. And the influence of the different rejuvenators on the rejuvenation mechanisms of aged SBS modified asphalt was characterized by different scales including the molecule structure, morphology...
journal article 2023
document
Mitici, M.A. (author), Hennink, Birgitte (author), Pavel, M.D. (author), Dong, J. (author)
The health management of batteries is a key enabler for the adoption of Electric Vertical Take-off and Landing vehicles (eVTOLs). Currently, few studies consider the health management of eVTOL batteries. One distinct characteristic of batteries for eVTOLs is that the discharge rates are significantly larger during take-off and landing, compared...
journal article 2023
document
Dong, J. (author), Sharifi K., Arman (author), Mohajerin Esfahani, P. (author)
We study a diagnosis scheme to reliably detect the active mode of discrete-time, switched affine systems in the presence of measurement noise and asynchronous switching. The proposed scheme consists of two parts: (i) the construction of a bank of filters, and (ii) the introduction of a residual/threshold-based diagnosis rule. We develop an...
journal article 2023
document
Cheng, Gang (author), Wu, S. (author), Shi, M. (author), Dong, W. (author), Zhu, H. (author), Alonso-Mora, J. (author)
Autonomous navigation of Micro Aerial Vehicles (MAVs) in dynamic and unknown environments is a complex and challenging task. Current works rely on assumptions to solve the problem. The MAV's pose is precisely known, the dynamic obstacles can be explicitly segmented from static ones, their number is known and fixed, or they can be modeled with...
journal article 2023
document
Wang, Yi (author), Yang, Zhongping (author), Lin, Fei (author), Dong, J. (author), Bauer, P. (author)
Compensation capacitors are naturally susceptible to manufacturing defects and aging effects, leading to the degraded performance of a wireless power transfer (WPT) system. This article focuses on the compensation parameters optimization during the design stage and control strategy during the operation phase to improve the inherent capacitor...
journal article 2023
document
Yu, G. (author), Ye, P. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The pursuit of battery charging technology for electric vehicle (EV) has led to extensive research on the inductive-based wireless power transfer (WPT) systems. In this paper, the compensation component (including coils) stresses will be studied in two commonly adopted compensation topologies, namely S-S and LCC-S compensations. Due to the peak...
conference paper 2023
document
Putra, N.E. (author), Leeflang, M.A. (author), Klimopoulou, M. (author), Dong, J. (author), Taheri, P. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Chang, J. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The development of biodegradable Fe-based bone implants has rapidly progressed in recent years. Most of the challenges encountered in developing such implants have been tackled individually or in combination using additive manufacturing technologies. Yet not all the challenges have been overcome. Herein, we present porous FeMn-akermanite...
journal article 2023
document
Li, Bo (author), Ouyang, Hao (author), Wang, T. (author), Dong, Tian (author)
Exploring the influence of settlement patterns on the landscape fragmentation in woodlands and biological reserves is key to achieving ecologically sustainable development. In this research, we chose the Nanshan National Park in Hunan Province, China, as a case study, to explore the influence mechanisms. First, we identified the biological...
journal article 2023
document
Zhu, G. (author), Dong, J. (author), Bauer, P. (author)
It is ideal for the wireless power transfer (WPT) systems to operate at the resonance state for better transmission performance. In practice, however, the parameters of the resonant circuits often deviate because of the capacitance drift and coil misalignment. To this end, this paper proposes a new parameter estimation method for the WPT systems...
conference paper 2023
document
He, Xinrui (author), Jia, W. (author), Dong, Yuxiang (author), Siahkouhi, Mohammad (author)
The railway industry has shown a strong interest in utilizing sustainable materials, including recycled materials and composites, in construction. Bamboo, as a highly renewable natural resource, has been proposed as a construction material for the railway industry. This material offers several advantages, such as high strength and durability,...
review 2023
document
Li, Hongyan (author), Li, Z. (author), Qiu, Liangsheng (author), Dong, Sufen (author), Ouyang, Jian (author), Dong, Xufeng (author), Han, Baoguo (author)
This study aims to understand the effects and mechanisms of length, diameter, and functional group of carbon nanotubes (CNTs) on rheological behaviors of cementitious composites. The experimental results show that the addition of CNTs decreases the flow index and increases the critical shear rate of cementitious composites. CNTs with a sub...
journal article 2023
document
Pastor Serrano, O. (author), Dong, Peng (author), Huang, Charles (author), Xing, Lei (author), Perko, Z. (author)
Background: Fast dose calculation is critical for online and real-time adaptive therapy workflows. While modern physics-based dose algorithms must compromise accuracy to achieve low computation times, deep learning models can potentially perform dose prediction tasks with both high fidelity and speed. Purpose: We present a deep learning...
journal article 2023
document
Guo, Baocheng (author), Du, Yunlu (author), Djelloul KHEDDA, Zakarya (author), Peng, Fei (author), Dong, J. (author), Huang, Yunkai (author), Frederic, Dubas (author), Boughrara, Kamel (author)
In this article, we propose a novel nonlinear semianalytical model (AM) for the magnetic field calculation of electric machines. The nonlinear properties and local saturation effect of the iron part are taken into consideration in Cartesian coordinates, which is the main contribution of the proposed model. Thus, high accuracy of...
journal article 2022
Searched for: +
(41 - 60 of 285)

Pages