Nanoprobes for PET/MR Imaging

The development of clinical imaging techniques significantly improves diagnostic accuracy and provides guidance for personalized treatment of individuals. However, every single imaging modality has its distinct drawbacks that cannot fully fulfil the diagnosis requirement. Thus, rational combination of different imaging modalities can achieve...

Simulation of Poyang Lake water levels and outflow under historical extreme hydrological scenarios

Due to an intensification of anthropogenic activities and climate change in recent decades, the hydrological connections and relationships between rivers and lakes have been significantly modified globally. Poyang Lake is one of the largest freshwater lakes globally and is one of the few that remain naturally connected to the Yangtze River....

Cancer Diagnosis Using Terahertz-Graphene-Metasurface-Based Biosensor with Dual-Resonance Response: Nanomaterials

Owing to the outstanding physical properties of graphene, its biosensing applications implemented by the terahertz metasurface are widely concerned and studied. Here, we present a novel design of the graphene metasurface, which consists of an individual graphene ring and an H-shaped graphene structure. The graphene metasurface exhibits a dual...

Tomographic SAR imaging with large elevation aperture: a P-band small UAV demonstration

Elevation resolution is an important indicator in tomographic SAR imaging as it represents the ability to discriminate closed targets in elevation. In general, the elevation resolution is proportional to the length of the elevation aperture. However, as the elevation aperture increases, the geometric consistency of the image will undesirably...

Optimization of mesa etch for a quasi-vertical gan schottky barrier diode (Sbd) by inductively coupled plasma (icp) and device characteristics

The optimization of mesa etch for a quasi-vertical gallium nitride (GaN) Schottky barrier diode (SBD) by inductively coupled plasma (ICP) etching was comprehensively investigated in this work, including selection of the etching mask, ICP power, radio frequency (RF) power, ratio of mixed gas, flow rate, and chamber pressure, etc. In particular...