Searched for: +
(1 - 20 of 95)

Pages

document
Wikkerink, D.P. (author), Gagic, Mladen (author), Mor, A. R. (author), Polinder, H. (author), Ross, Robert (author)
A degaussing system can be used to reduce the detectability of the magnetic signature of a ship. Commonly, a degaussing system consists of a set of onboard copper coils that produce a magnetic field to compensate for the magnetic signature. High-temperature superconductive degaussing coils are considered an alternative to copper degaussing...
journal article 2024
document
Janissen, R. (author), Barth, R. (author), Polinder, M.L. (author), van der Torre, J. (author), Dekker, C. (author)
Transcription-coupled supercoiling of DNA is a key factor in chromosome compaction and the regulation of genetic processes in all domains of life. It has become common knowledge that, during transcription, the DNA-dependent RNA polymerase (RNAP) induces positive supercoiling ahead of it (downstream) and negative supercoils in its wake ...
journal article 2024
document
Tan, J. (author), Polinder, H. (author), Jarquin Laguna, A. (author), Miedema, S.A. (author)
An adjustable draft point absorber was recently proposed as a novel approach to improve power absorption with constrained power take-off (PTO) capacities. The key feature of the novel wave energy converter (WEC) concept is to adjust the buoy draft by regulating the ballast water inside the buoy, which aims to enable variation of the natural...
journal article 2023
document
Mylonopoulos, F.M. (author), Polinder, H. (author), Coraddu, A. (author)
This paper presents a comprehensive literature review of the state-of-the art modeling and optimization methods for the power and propulsion systems of ships. Modeling is a tool to investigate the performance of actual systems by running simulations in the virtual world. There are two main approaches in modeling: physics-based and data-driven...
journal article 2023
document
Tan, J. (author), Tao, W. (author), Jarquin Laguna, A. (author), Polinder, H. (author), Xing, Yihan (author), Miedema, S.A. (author)
Wave-to-Wire models play an important role in the development of wave energy converters. They could provide insight into the complete operating process of wave energy converters, from the power absorption stage to the power conversion stage. In order to cover a set of relevant nonlinear effects, wave-to-wire models are predominately...
journal article 2023
document
Latorre, Alejandro (author), Soeiro, Thiago B. (author), Geertsma, R.D. (author), Coraddu, A. (author), Polinder, H. (author)
This article gives an overview of challenges in primary distribution, protections, and power scalability for shipboard dc systems. Given that dc technology is in development, several aspects of shipboard systems have not yet been sufficiently devised to ensure the protection and efficiency demanded. Several issues in dc systems arise from the...
journal article 2023
document
Gutierrez Santiago, U. (author), Sisón, Alfredo Fernández (author), Polinder, H. (author), van Wingerden, J.W. (author)
Accurate knowledge of the input torque in wind turbine gearboxes is key to improving their reliability. Traditionally, rotor torque is measured using strain gauges bonded to the shaft. Transferring the resulting signal from the rotating shaft to a stationary data acquisition system while powering the sensing devices is complex and costly. The...
journal article 2022
document
Wikkerink, D.P. (author), Mor, A. R. (author), Polinder, H. (author), Ross, Robert (author)
Ships can avoid to be detected by magnetic mines by reducing their magnetic signature with degaussing coils. Degaussing currents are provided by switched mode power supplies which impose a current ripple on top of the degaussing current. The ripple might be visible in the magnetic signature which would increase the detectability of the ship. A...
journal article 2022
document
Tan, J. (author), Wang, X. (author), Polinder, H. (author), Jarquin Laguna, A. (author), Miedema, S.A. (author)
A crucial part of wave energy converters (WECs) is the power take-off (PTO) mechanism, and PTO sizing has been shown to have a considerable impact on the levelized cost of energy (LCOE). However, as a dominating type of PTO system in WECs, previous research pertinent to PTO sizing did not take modeling and optimization of the linear permanent...
journal article 2022
document
Karagiorgis, S. (author), Nasiri, S. (author), Polinder, H. (author)
Interest in ship hybridization has increased as a result of policies to combat climate change and boost energy independence. However, designing and optimizing hybrid propulsion systems is a challenging task. The availability of numerous power, propulsion, and energy system topologies with different energy storage and conversion technologies...
journal article 2022
document
Langer, J.K.A. (author), Simanjuntak, Sergio (author), Pfenninger, Stefan (author), Jarquin Laguna, A. (author), Lavidas, G. (author), Polinder, H. (author), Quist, J.N. (author), Rahayu, Harkunti Pertiwi (author), Blok, K. (author)
The current focus of offshore wind industry and academia lies on regions with strong winds, neglecting areas with mild resources. Photovoltaics' cost reductions have shown that even mild resources can be harnessed economically, especially where electricity prices are high. Here, we study the technical and economic potential of offshore wind...
journal article 2022
document
Verberk, Rogier (author), Michalak, D.J. (author), Versluis, R. (author), Polinder, H. (author), Samkharadze, Nodar (author), Amitonov, S. (author), Sammak, A. (author), Tryputen, L. (author), Brousse, D. (author), Hanfoug, R. (author)
As part of the National Agenda for Quantum Technology, QuTech (TU Delft and TNO) has agreed to make quantum technology accessible to society and industry via its full-stack prototype: Quantum Inspire. This system includes two different types of programmable quantum chips: circuits made from superconducting materials (transmons), and circuits...
conference paper 2022
document
Wikkerink, D.P. (author), Mor, A. R. (author), Polinder, H. (author), Ross, Robert (author)
Detection of the magnetic signature of ships can be avoided by using a degaussing system; a set of on-board copper coils that compensates for the magnetic signature. High temperature superconductors (HTS) are currently investigated as a replacement for copper degaussing coils. By using HTS, we have to deal with higher currents and therefore...
journal article 2022
document
Nejad, Amir R. (author), Keller, Jonathan (author), Guo, Yi (author), Sheng, Shawn (author), Polinder, H. (author), Watson, S.J. (author), Dong, J. (author), Qin, Z. (author), Ebrahimi, Amir (author)
This paper presents the state-of-the-art technologies and development trends of wind turbine drivetrains – the system that converts kinetic energy of the wind to electrical energy – in different stages of their life cycle: design, manufacturing, installation, operation, lifetime extension, decommissioning and recycling. Offshore development and...
review 2022
document
Tan, J. (author), Polinder, H. (author), Jarquin Laguna, A. (author), Miedema, S.A. (author)
The Power Take-Off (PTO) rating of Wave Energy Converters (WECs) is generally much higher than the average extracted power. Scientific literature has indicated that downsizing the PTO capacity to a suitable level is beneficial for improving the techno-economic competitiveness. In this paper, a novel design, namely the adjustable draft system,...
journal article 2022
document
Gutierrez Santiago, U. (author), Sisón, Alfredo Fernández (author), Polinder, H. (author), van Wingerden, J.W. (author)
The significant increase in rotor diameters seen in modern wind turbines has pushed gearbox manufacturers to introduce technological innovations to increase the torque density of current designs. Driven by the need to lower the cost of energy from wind and size limitations imposed by logistic constraints in onshore wind, a trend has emerged...
journal article 2022
document
Tan, J. (author), Polinder, H. (author), Jarquin Laguna, A. (author), Miedema, S.A. (author)
The power take-off (PTO) system is a main component in wave energy converters (WECs), and it accounts for a notable proportion in the total cost. Sizing the PTO capacity has been proven to be significant to the cost-effectiveness of WECs. In the numerical modeling, the PTO size is normally represented by a force constraint. Therefore, to...
journal article 2022
document
Wang, X. (author), Liu, Dong (author), Polinder, H. (author)
Doubly fed induction generator (DFIG) based wind turbines are most employed for onshore applications because of their cost-effectiveness. The drivetrain improvement is barely studied due to the maturity of the DFIG based systems. This paper investigates two methods for improving the annual energy production (AEP) of the DFIG based wind...
journal article 2021
document
Wani, F.M. (author), Shipurkar, U. (author), Dong, J. (author), Polinder, H. (author)
This paper compares active and passive cooling systems in tidal turbine power electronic converters. The comparison is based on the lifetime of the IGBT (insulated gate bipolar transistor) power modules, calculated from the accumulated fatigue due to thermal cycling. The lifetime analysis accounts for the influence of site conditions, namely...
journal article 2021
document
Tan, J. (author), Polinder, H. (author), Jarquin Laguna, A. (author), Wellens, P.R. (author), Miedema, S.A. (author)
Currently, the techno-economic performance of Wave Energy Converters (WECs) is not competitive with other renewable technologies. Size optimization could make a difference. However, the impact of sizing on the techno-economic performance of WECs still remains unclear, especially when sizing of the buoy and Power Take-Off (PTO) are considered...
journal article 2021
Searched for: +
(1 - 20 of 95)

Pages