Highly efficient carbon assimilation and nitrogen/phosphorus removal facilitated by photosynthetic O₂ from algal-bacterial aerobic granular sludge under controlled DO/pH operation

Reducing CO₂ emission and energy consumption is crucial for the sustainable management of wastewater treatment plants (WWTPs). In this study, an algal-bacterial aerobic granular sludge (AGS) system was developed for efficient carbon (C) assimilation and nitrogen (N)/phosphorus (P) removal without the need for mechanical aeration....

Author Correction: Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements (Nature Communications, (2021), 12, 1, (5943), 10.1038/s41467-021-26190-2)

The original version of this article contained errors in Figure 3a and Figure 3f. In Figure 3a, the activation energies (Ea) were calculated using a log scale instead of a logarithm ln scale. In Figure 3f, the y-axis interval was not properly selected. The correct y-axis interval in Figure 3f and the numerical values of the activation energy...

Continual driver behaviour learning for connected vehicles and intelligent transportation systems: Framework, survey and challenges

Modelling, predicting and analysing driver behaviours are essential to advanced driver assistance systems (ADAS) and the comprehensive understanding of complex driving scenarios. Recently, with the development of deep learning (DL), numerous driver behaviour learning (DBL) methods have been proposed and applied in connected vehicles (CV) and...

4DEnVar-based inversion system for ammonia emission estimation in China through assimilating IASI ammonia retrievals

Atmospheric ammonia has been hazardous to the environment and human health for decades. Current inventories are usually constructed in a bottom-up manner and subject to uncertainties and incapable of reproducing the spatiotemporal characteristics of ammonia emission. Satellite measurements, for example, Infrared Atmospheric Sounder...

Effects of microporous layer on electrolyte flooding in gas diffusion electrodes and selectivity of CO₂ electrolysis to CO

Understanding the relationship between gas diffusion electrode (GDE) structures and the performance of electrochemical CO₂ reduction reaction (CO₂RR) is crucial to developing industrial-scale technologies to convert CO₂ to valuable products. We studied how the microporous layer (MPL) on GDE's coated with...

An Ensemble Learning Framework for Vehicle Trajectory Prediction in Interactive Scenarios

Precisely modeling interactions and accurately predicting trajectories of surrounding vehicles are essential to the decision-making and path-planning of intelligent vehicles. This paper proposes a novel framework based on ensemble learning to improve the performance of trajectory predictions in interactive scenarios. The framework is termed...

Effect of High Content of Waste Tire Rubber and Sulfur on the Aging Behavior of Bitumen

High content rubber modified bitumen (HCRMB) prepared from the high content of waste tire rubber and bitumen has good performance while allowing greater use of the waste tires. However, HCRMB is subject to aging during use, which can affect its performance. The purpose of this paper was to investigate the effect of high content of waste tire...

Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements

A key challenge for solid-state-batteries development is to design electrode-electrolyte interfaces that combine (electro)chemical and mechanical stability with facile Li-ion transport. However, while the solid-electrolyte/electrode interfacial area should be maximized to facilitate the transport of high electrical currents on the one hand,...

From aircraft tracking data to network delay model: A data-driven approach considering en-route congestion

En-route congestion causes delays in air traffic networks and will become more prominent as air traffic demand will continue to increase yet airspace volume cannot grow. However, most existing studies on flight delay modeling do not consider en-route congestion explicitly. In this study, we propose a new flight delay model, Multi-layer Air...

Perovskite solar cells with embedded homojunction via nonuniform metal ion doping

A long photoluminescence decay lifetime has been regarded as a generic indication of long charge carrier recombination lifetime in semiconductors such as metal halide perovskites (MHPs), which have shown tremendous success in solar cells. Here, we report that MHP polycrystalline films with extrinsic metal ions have a very long charge...

Review of Packaging Schemes for Power Module

SiC devices are promising for outperforming Si counterparts in high-frequency applications due to its superior material properties. Conventional wirebonded packaging scheme has been one of the most preferred package structures for power modules. However, the technique limits the performance of a SiC power module due to parasitic inductance...

The residual stress characteristics and mechanical behavior of shot peened fiber metal laminates based on the aluminium-lithium alloy

The effect of shot peen forming on the mechanical behavior of fiber metal laminates (FMLs) based on aluminium-lithium alloy was investigated to reveal the strengthening mechanism and to dispel the suspicion that shot peen forming may result in the performance deterioration of FMLs. The interlaminar, static strength and fatigue properties of...

The Relative Biological Effect of Spread-Out Bragg Peak Protons in Sensitive and Resistant Tumor Cells

Purpose: Variations in the radiosensitivity of tumor cells within and between tumors impact tumor response to radiation, including the dose required to achieve permanent local tumor control. The increased expression of DNA-PKcs, a key component of a major DNA damage repair pathway in tumors treated by radiation, suggests that DNA-PKcs– dependent...

Hydrologic and cryospheric processes observed from space

Ten Dragon 3 projects deal with hydrologic and cryosphere processes, with a focus on the Himalayas and Qinghai – Tibet Plateau, but not limited to that. At the 1st Dragon 3 Progress Symposium in 2013 a significant potential for a better and deeper integration appeared very clearly and we worked out an overview of the ten projects identifying...