Searched for: +
(1 - 14 of 14)
document
Feng, Lichao (author), Yi, Shengjie (author), Zhao, Shuyuan (author), Zhong, Qiucheng (author), Ren, Feirong (author), Liu, C. (author), Zhang, Y. (author), Wang, Wenshou (author), Li, Zhenming (author)
Recycling aluminosilicate-based solid wastes is imperative to realize the sustainable development of constructions. By using alkali activation technology, aluminosilicate-based solid wastes, such as furnace slag, fly ash, red mud, and most of the bio-ashes, can be turned into alternative binder materials to Portland cement to reduce the carbon...
review 2024
document
Ji, Jiayan (author), Song, Xianzhi (author), Yi, Junlin (author), Song, G. (author), Wang, Gaosheng (author)
Fractures and caves are the main flow and storage channels for the karst geothermal reservoirs, and the water-rock reaction within them significantly affects the thermal performance. Most previous studies concentrated on the fractures, disregarding the impact of the pore water-rock reaction. The objective of this study is to explore the...
journal article 2024
document
Yi, Yangtian (author), Lu, Chao (author), Wang, Boyang (author), Cheng, Long (author), Li, Z. (author), Gong, Jianwei (author)
Accurate recognition of driver behaviours is the basis for a reliable driver assistance system. This paper proposes a novel fusion framework for driver behaviour recognition that utilises the traffic scene and driver gaze information. The proposed framework is based on the graph neural network (GNN) and contains three modules, namely, the...
journal article 2023
document
Chen, Qiting (author), Jia, Li (author), Menenti, M. (author), Hu, Guangcheng (author), Wang, Kun (author), Yi, Zhiwei (author), Zhou, Jie (author), Peng, Fei (author), Ma, Shaoxiu (author)
Information on crop yield is important for food security, in particular under the conditions of climate change and growing population worldwide. We developed a new fully distributed, high spatial resolution, model of biomass accumulation and crop yield applicable to a highly heterogeneous desert-oasis agroecosystem. The bulk of required input...
journal article 2023
document
Chang, Xiwen (author), Long, Yongshuang (author), Yi, Mingwei (author), Wang, C. (author), Xiao, Yue (author)
Due to the complex organic properties of asphalt materials, the heating process during asphalt pavement construction will lead to the release of asphalt VOCs‧ Asphalt VOCs volatilization will cause irreversible harm to both the environment and health of construction workers‧ Researchers in the field of road construction have carried out...
review 2023
document
Ge, Jianzhong (author), Chen, Changsheng (author), Wang, Zhengbing (author), Ke, Keteng (author), Yi, Jinxu (author), Ding, Ping Xing (author)
Fluid mud (FM) is a unique sedimentary feature in high-turbidity estuaries, where it can make a rapid contribution to morphodynamics. Insufficient field measurements and fixed-point monitoring lead to deficient understandings of the formation, transport, and breakdown of the FM under extreme weather conditions. A field survey was conducted in...
journal article 2020
document
Sun, J. (author), Zhang, Shuo (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Li, Jinmin (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A high responsivity and controllable recovery ultraviolet (UV) photodetector based on a tungsten oxide (WO<sub>3</sub>) gate AlGaN/GaN heterostructure with an integrated micro-heater is reported for the first time. The WO<sub>3</sub>nanolayer was deposited by physical vapor deposition (PVD) for deep UV absorption and the micro-heater was...
journal article 2020
document
Li, Huajian (author), Huang, Fali (author), Yi, Zhonglai (author), Wang, Zhen (author), Zhang, Y. (author), Yang, Zhengxian (author)
Rheological properties are of significant importance in successful placement and performance of self-compacting concrete (SCC). In this work, the rheological properties of SCC, combined with a powder-viscosity modifying admixture, were investigated based on a series of experimental studies. The modified Bingham model was applied to determine...
journal article 2020
document
Li, Huajian (author), Sun, Deyi (author), Wang, Zhen (author), Huang, Fali (author), Yi, Zhonglai (author), Yang, Zhengxian (author), Zhang, Y. (author)
Pumping is the most common technique used to transport fresh concrete in construction sites. The large-scale use of concrete all over the world makes the pumping increasingly important. A wide variety of additives and admixtures are incorporated into modern concrete in order for sustainable development. The performance of modern concrete is...
journal article 2020
document
Sun, J. (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
This paper demonstrates a method to reduce the decay time in AlGaN/GaN photodetectors by a pulsed heating mode. A suspended AlGaN/GaN heterostructure photodetector integrated with a micro-heater is fabricated and characterized under ultraviolet illumination. We have observed that the course of persistent photoconductivity was effectively...
journal article 2019
document
Sun, J. (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A suspended WO<sub>3</sub>-gate AlGaN/GaN heterostructure photodetector integrated with a micro-heater is micro-fabricated and characterized for ultraviolet photo detection. The transient optical characteristics of the photodetector at different temperatures are studied. The 2DEG-based photodetector shows a recovery (170 s) time under 240 nm...
journal article 2019
document
Yi, Ran (author), Wu, Chenming (author), Liu, Yong-Jin (author), He, Ying (author), Wang, C.C. (author)
This paper presents a 3-D printing system that uses a low-cost off-the-shelf consumer projector to fabricate large models. Compared with traditional digital light processing (DLP) 3-D printers using a single vertical carriage, the platform of our DLP 3-D printer using delta mechanism can also move horizontally in the plane. We show that this...
journal article 2018
document
Molina-Luna, Leopoldo (author), Wang, Shuai (author), Pivak, Yevheniy (author), Zintler, Alexander (author), Perez Garza, H.H. (author), Spruit, R.G. (author), Xu, Q. (author), Yi, Min (author), Xu, Bai Xiang (author), Acosta, Matias (author)
Any dielectric material under a strain gradient presents flexoelectricity. Here, we synthesized 0.75 sodium bismuth titanate −0.25 strontium titanate (NBT-25ST) core–shell nanoparticles via a solid-state chemical reaction directly inside a transmission electron microscope (TEM) and observed domain-like nanoregions (DLNRs) up to an extreme...
journal article 2018
document
Abdollahi, R. (author), Alexandropoulou, I. (author), Driessen, D. (author), Duisdecker, P. (author), Kalonaityte, E. (author), Kerkdijk, E. (author), Khodaeiani, P. (author), Nouws, T. (author), Phadoongsat, V. (author), Wang, W. (author), Yi, Y. (author), Yin, S. (author)
Research Booklet MSC3 Studio Public Realm Rotterdam 2011-2012.
master thesis 2012
Searched for: +
(1 - 14 of 14)