Searched for: +
(1 - 20 of 83)

Pages

document
Schijve, J. (author), Jacobs, F.A. (author), Tromp, P.J. (author)
Flight-simulation tests were carried out on sheet specimens notched "by an open hole (Kt = 2.66). The material was 2024-T3 in three conditions; Alclad, bare and chemically milled. The crack initiation period and the crack propagation period were considerably shorter for the Alclad material. The significance of the cladding, both for constant...
report 1976
document
Schra, L. (author), van Leeuwen, H.P. (author)
The influence of previous corrosion on the fatigue life was investigated. It was foimd that a slight corrosive attack could drastically reduce the fatigue life. The damaging effect of corrosion was greater for the alloy AA 7050 than for AZ 74.61. It could be established that fatigue cracks initiated from various corrosion pits. A second series...
report 1977
document
de Graaf, E.A.B. (author), de Rijk, P. (author)
The present report describes how fatigue cracks were produced in 102 specimens. After cracking these specimens were inspected non-destructively by means of eddy currents, ultrasonics. X-rays and penetrants, and the indications were recorded. Successively the specimens were exposed to corrosion whereafter the inspections were repeated. Upon...
report 1978
document
Gellings, P.J. (author)
Revised edition of 1976.
book 1985
document
Wanhill, R.J.H. (author), Schra, L. (author), 't Hart, W.G.J. (author)
New impetus to continued use of alximinium alloys in major structural areas of aircraft has been given by the development of aluminium-lithium alloys. However, qualification of these new materials for service requires extensive testing and evaluation, preferably in international cooperative programmes. The evaluation of aluminium-lithium alloys...
report 1989
document
Gulikers, J.J.W. (author)
Chloride-induced reinforcement corrosion in concrete is characterised by the action of so-called macrocells. The associated localised form of corrosion results from the strong electrochemical interaction between the relatively small pitting sites acting as anodes and the large passive steel areas acting as cathodes. The existence of macrocell...
journal article 1996
document
Meijers, S.J.H. (author), Bijen, J.M.J.M. (author), De Borst, R. (author), Fraaij, A.L.A. (author)
Exposure to a saline environment is a major threat with respect to the durability of reinforced concrete structures. The chloride ions, which are present in seawater and de-icing salts, are able to penetrate the concrete up to the depth of the reinforcement. They can eventually trigger a pitting corrosion process. The assessment of a corrosion...
journal article 2001
document
Wanhill, R.J.H. (author)
Archaeological silver may be embrittled by long-term corrosion and microstructural changes. The embrittlement of artifacts increases with increasing grain size. This is explained by considering the grain boundary character and models describing the interactions between microcracks, lattice dislocations and grain boundaries. Severely embrittled...
report 2001
document
Campestrini, P. (author)
doctoral thesis 2002
document
Andreatta, F. (author)
Aluminium alloys of the 7xxx series (Al-Zn-Mg-Cu) are susceptible to localized types of corrosion like pitting, intergranular corrosion and exfoliation corrosion. This represents a limitation for the application of these alloys in the aerospace components because localized corrosion might have a negative effect on safety and costs. This PhD...
doctoral thesis 2004
document
Gaal, G.C.M. (author)
In the early 20th century, the general idea was that concrete structures would never show deterioration. However, in the 1990s concrete structures showed an increase in number of cracks and area of spalling. Especially spalling of the concrete cover could create a harmful situation to the users. Spalling of the cover is caused by corrosion of...
doctoral thesis 2004
document
Zhang, X. (author)
With the aims of understanding the protective mechanism of chromate conversion coatings and developing alternatives to chromate treatments, the physical natures and corrosion properties of Cr(VI) and Cr(III) treated zinc have been investigated in this work. The Cr(VI) treatments were carried out in dichromate and sulfuric acid solution with...
doctoral thesis 2005
document
Hamer, W.J. (author)
Chromate compounds have been widely used to improve the corrosion protection of galvanised steel and aluminium objects in the past decades. The hexavalent chromium in chromate enhances the adherence of coatings to galvanised steel and aluminium. Additionally, if the passive layers on these materials should become damaged, hexavalent chromium...
doctoral thesis 2005
document
Nijdam, T.J. (author)
The turbine blades in gas turbine engines need to be protected against high temperature oxidation and corrosion with a coating system. This coating system comprises of a Ni-based superalloy substrate, a NiCoCrAlY bond coating (BC) and an insulating ceramic thermal barrier coating (TBC). Good protection is offered when during service of the...
doctoral thesis 2005
document
Flores Ramirez, J.R. (author)
An investigation concerning the effects of magnesium on the intergranular corrosion susceptibility of AA5XXX aluminium alloys was carried out. In the present work, magnesium is found to be highly mobile in the bulk metal as well as in the aluminium oxide. This mobility is also found to be dependent on the temperature and bulk magnesium...
doctoral thesis 2006
document
Koleva, D.A. (author)
Corrosion and protection in reinforced concrete. Pulse cathodic protection: an improved cost-effective alternative. The aim of the research project was to study the possibilities for establishing a new or improved electrochemical method for corrosion prevention/protection for reinforced concrete. The main objective was to develop an alternative...
doctoral thesis 2007
document
Vreeburg, J.H.G. (author)
The quality of drinking water in the Netherlands meets high standards as is annually reported by the Ministry of Housing, Spatial Planning and the Environment (VROM)(Versteegh and Dik, 2006). Also the water companies themselves report in the voluntary Benchmark that water quality is one of the least discriminating factors as all the companies ...
doctoral thesis 2007
document
López De La Cruz, J. (author), Kuniewski, S.P. (author), Van Noortwijk, J.M. (author), Guriérrez, M.A. (author)
A method to test the assumption of nonhomogeneous Poisson point processes is implemented to analyze corrosion pit patterns. The method is calibrated with three artificially generated patterns and manages to accurately assess whether a pattern distribution is random, regular, or clustered. The interevent and the nearest-neighbor statistics are...
journal article 2008
document
Lopez De La Cruz, J.M. (author)
The techniques presented in this thesis are focused to improve corrosion management by providing a better insight into the nature of corrosion. Spatial statistics and finite element simulations are applied to different corrosion patterns to study possible interaction among pits. In order to achieve reliable results different spatial techniques...
doctoral thesis 2008
document
Boelen, B. (author)
Recent developments in various countries have led to the development of new types of polymer coated packaging steel. These materials behave differently in production and end use and are therefore subject of extensive studies. The aim of this research is to understand the influence of deformation of pre-coated packaging steel sheet on real can...
doctoral thesis 2009
Searched for: +
(1 - 20 of 83)

Pages