Microstructural Evolution and Behavior of Deuterium in a Ferritic ODS 12 Cr Steel Annealed at Different Temperatures

In the present work, an ODS 12 Cr steel was characterized using Electron Microscopy techniques, in an as-received condition and after annealing treatments between 773 K and 1573 K. Results show a complex microstructure, with the presence of fine Y–Ti–O nanoparticles dispersed in the matrix. After annealing at 1573 K, the average diameter of Y...

Investigation of coarsening of oxide nanoparticles at 1400 K and its effect on the microstructure formation of an ODS Eurofer steel

Oxide Dispersion Strengthened (ODS) steels are potential candidate materials for application as structural components of fission and fusion reactors, known for their high thermal stability, high resistance to creep and to radiation-induced damage. These attractive properties result from the presence of the fine and highly thermally stable...

A study of the microstructural stability and defect evolution in an ODS Eurofer steel by means of Electron Microscopy and Positron Annihilation Spectroscopy

An approach to improve the performance of steels for fusion reactors is to reinforce them with oxide nanoparticles. These can hinder dislocation and grain boundary movement and trap radiation-induced defects, thus increasing creep and radiation damage resistance. The present work investigates the thermal stability of the microstructure and...

Dose effects in He implanted Eurofer97 steel

Reduced Activation Ferritic/Martensitic steels are being extensively studied because of their foreseen application in fusion reactors. To reproduce neutron irradiation conditions, Eurofer97 samples were implanted at room temperature with helium ions at energies of 500 keV and 2 MeV and doses of 1x1015-1017 He /cm2. The implantation induced...

Helium implanted RAFM steels studied by positron beam Doppler Broadening and Thermal Desorption Spectroscopy

Reduced Activation Ferritic/Martensitic steels are being extensively studied because of their foreseen application in fusion and Generation IV fission reactors. To mimic neutron irradiation conditions, Eurofer97 samples were implanted with helium ions at energies of 500 keV and 2 MeV and doses of 5x1015-1016 He /cm2, creating atomic...

Investigation of Deformation Mechanisms in Deep-Drawn and Tensile-Strained Austenitic Mn-Based Twinning Induced Plasticity (TWIP) Steel

The effect of strain on the deformation mechanisms in an austenitic Mn-based twinning induced plasticity (TWIP) steel is investigated using magnetic measurements, XRD, positron beam Doppler spectroscopy, and finite element method simulations. The experimental observations reveal the formation of a0-martensite at specific degrees of deformation,...