The use of additive manufacturing in self-healing cementitious materials: A state-of-the-art review

This paper presents a state-of-the-art review on the application of additive manufacturing (AM) in self-healing cementitious materials. AM has been utilized in self-healing cementitious materials in three ways: (1) concrete with 3D-printed capsules/vasculatures; (2) 3D concrete printing (3DCP) with fibers or supplementary cementitious...

Improving structural build-up of limestone-calcined clay-cement pastes by using inorganic additives

In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl₂ and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...

Effect of curing methods during a long time gap between two printing sessions on the interlayer bonding of 3D printed cementitious materials

A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...

A review of printing strategies, sustainable cementitious materials and characterization methods in the context of extrusion-based 3D concrete printing

This paper aims to provide a systematical review of the available printing strategies, sustainable cementitious materials and characterization methods for extrusion-based 3D concrete printing (3DCP). The printing strategies, consisting of printing setup, process, and material requirements, were summarized initially. In the material aspect,...

3D printing of calcined clay-limestone-based cementitious materials

This paper aims to investigate the influences of high Portland cement substitutions (>60 wt%) by low-grade calcined clay (CC) and limestone (LF) on 3D concrete printability, stiffness evolution and early-age hydration. Results show that, with the same dosage of admixtures (superplasticizer and viscosity modifier), increasing LF and CC...