Searched for: +
(41 - 60 of 372)

Pages

document
Noom, J. (author), Smith, C.S. (author), Verbiest, G.J. (author), Katan, A.J. (author), Soloviev, O.A. (author), Verhaegen, M.H.G. (author)
We propose to use the State Estimation by Sum-of-Norms Regularisation (STATESON-)algorithm for recovering the tip-sample interaction in high-speed tapping mode atomic force microscopy (AFM). This approach enables accurate sample height estimation for each independent cantilever oscillation period, provided that the tip-sample interaction...
journal article 2023
document
Fan, D. (author), Cnossen, J.P. (author), Hung, S. (author), Kromm, D. (author), Dekker, N.H. (author), Verbiest, G.J. (author), Smith, C.S. (author)
To better understand the interactions between biological molecules, a high optical resolution in all three dimensions is crucial. The intrinsically lower axial resolution of microscopes however, is a limiting factor in fluorescence imaging, correspondingly in fluorescence based single molecule localization microscopy (SMLM). Here, we present...
journal article 2023
document
Botros, Alexander (author), Gilhuly, Barry (author), Wilde, N. (author), Sadeghi, Armin (author), Alonso-Mora, J. (author), Smith, Stephen L. (author)
We study the problem of deploying a fleet of mobile robots to service tasks that arrive stochastically over time and at random locations in an environment. This is known as the Dynamic Vehicle Routing Problem (DVRP) and requires robots to allocate incoming tasks among themselves and find an optimal sequence for each robot. State-of-the-art...
journal article 2023
document
Chen, Shuyi (author), Parnell, S.R. (author), Kokalari, I. (author), Smith, Gregory N. (author), Zeng, Bing Hong (author), Way, Tun Fun (author), Chuang, Fu Sheng (author), Rwei, A.Y. (author)
Waterborne polyurethane (WPU) has attracted significant interest as a promising alternative to solvent-based polyurethane (SPU) due to its positive impact on safety and sustainability. However, significant limitations of WPU, such as its weaker mechanical strength, limit its ability to replace SPU. Triblock amphiphilic diols are promising...
journal article 2023
document
Nagalingam, Nagaraj (author), Raghunathan, Aswin (author), Korede, V.B. (author), Poelma, C. (author), Smith, C.S. (author), Hartkamp, Remco (author), Padding, J.T. (author), Eral, H.B. (author)
We demonstrate that a cavitation bubble initiated by a Nd:YAG laser pulse below breakdown threshold induces crystallization from supersaturated aqueous solutions with supersaturation and laser-energy-dependent nucleation kinetics. Combining high-speed video microscopy and simulations, we argue that a competition between the dissipation of...
journal article 2023
document
van Hattem, A. (author), Alders, D.C. (author), Konings, R. (author), Smith, A.L. (author)
The thermochemistry of the ternary system CsI-PbI<sub>2</sub>-BiI<sub>3</sub>, of interest for applications in photovoltaics, memory devices, and nuclear applications, among other things, is investigated in this work. The binary phase diagrams CsI-PbI<sub>2</sub> and CsI-BiI<sub>3</sub> were subjected to renewed experimental investigation,...
journal article 2023
document
Sierra Soraluce, A. (author), Li, G. (author), Santofimia, Maria Jesus (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Muratori, M. (author), Sabirov, I. (author)
Recent studies have demonstrated the viability of quenching and partitioning (Q&amp;P) treatment for processing martensitic stainless steels showing an improved balance of high strength and sufficient ductility. However, to date, the fatigue behaviour of these materials has not been explored. This study examines the effect of their complex...
journal article 2023
document
Thor, Robin N. (author), Mertens, M. (author), Matthes, Sigrun (author), Righi, Mattia (author), Hendricks, Johannes (author), Brinkop, Sabine (author), Graf, Phoebe (author), Grewe, V. (author), Jöckel, Patrick (author), Smith, Steven (author)
We report on an inconsistency in the latitudinal distribution of aviation emissions between the data products of phases 5 and 6 of the Coupled Model Intercomparison Project (CMIP). Emissions in the CMIP6 data occur at higher latitudes than in the CMIP5 data for all scenarios, years, and emitted species. A comparative simulation with the...
journal article 2023
document
Sierra Soraluce, A. (author), Li, G. (author), Santofimia, Maria Jesus (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Muratori, M. (author), Sabirov, I. (author)
Quenching and partitioning (Q&amp;P) treatment has been proven effective in manufacturing advanced high strength steels with high content of retained austenite, showing the improved balance of high strength and sufficient ductility. This method has been very well elaborated for carbon steel processing over the last two decades. Though it can...
journal article 2023
document
Khosravi, M. (author), Smith, R. S. (author)
In this article, we consider the problem of system identification when side-information is available on the steady-state gain (SSG) of the system. We formulate a general nonparametric identification method as an infinite-dimensional constrained convex program over the reproducing kernel Hilbert space (RKHS) of stable impulse responses. The...
journal article 2023
document
van der Maas, E.L. (author), Famprikis, Theodosios (author), Pieters, S. (author), Dijkstra, Jonas P. (author), Li, Z. (author), Parnell, S.R. (author), Smith, Ronald I. (author), van Eck, Ernst R.H. (author), Ganapathy, S. (author), Wagemaker, M. (author)
Chloride-based solid electrolytes are considered interesting candidates for catholytes in all-solid-state batteries due to their high electrochemical stability, which allows the use of high-voltage cathodes without protective coatings. Aliovalent Zr(iv) substitution is a widely applicable strategy to increase the ionic conductivity of Li<sub...
journal article 2023
document
Khosravi, M. (author), Smith, Roy S. (author)
This paper discusses the problem of system identification when frequency domain side-information is available. We mainly consider the case where the side-information is provided as the H<sub>∞</sub>-norm of the system being bounded by a given scalar. This framework allows considering different forms of frequency domain side-information, such...
journal article 2023
document
Kouwenhoven, K. (author), Fan, D. (author), Biancalani, Enrico (author), de Rooij, S.A.H. (author), Karim, A.T. (author), Smith, C.S. (author), Murugesan, Vignesh (author), Thoen, David (author), Baselmans, J.J.A. (author), de Visser, P.J. (author)
Kinetic inductance detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a β-phase tantalum (β-Ta) inductor and a Nb-Ti-N interdigitated capacitor. The devices show an average intrinsic quality factor Qi of 4.3×105±1.3×105....
journal article 2023
document
Yin, Mingzhou (author), Ozan, Defne E. (author), Iannelli, Andrea (author), Smith, Roy S. (author)
conference paper 2022
document
Smith, Garrett (author), Tardella, Armand (author), Boucheriguene, Yacine (author)
conference paper 2022
document
O'Kane, Mary (author), Smith, Joel (author), Kilbride, Rachel C. (author), Spooner, Emma L.K. (author), Duif, C.P. (author), Catley, Thomas E. (author), Washington, Adam (author), King, Stephen M. (author), Parnell, S.R. (author), Parnell, Andrew J. (author)
Tailoring the solution chemistry of metal halide perovskites requires a detailed understanding of precursor aggregation and coordination. In this work, we use various scattering techniques, including dynamic light scattering (DLS), small angle neutron scattering (SANS), and spin-echo SANS (SESANS) to probe the nanostructures from 1 nm to 10...
journal article 2022
document
Hung, S. (author), Llobet Rosell, Arnau (author), Jurriens, Daphne (author), Soloviev, O.A. (author), Kapitein, Lukas C. (author), Grußmayer, K.S. (author), Neukomm, Lukas J. (author), Verhaegen, M.H.G. (author), Smith, C.S. (author)
Single-molecule localization microscopy (SMLM) enables the high-resolution visualization of organelle structures and the precise localization of individual proteins. However, the expected resolution is not achieved in tissue as the imaging conditions deteriorate. Sample-induced aberrations distort the point spread function (PSF), and high...
journal article 2022
document
Wiersma, M.S.J. (author), Heiles, B.G. (author), Kalisvaart, D. (author), Maresca, D. (author), Smith, C.S. (author)
Ultrasound localization microscopy (ULM) is a vascular imaging method that provides a 10-fold improvement in resolution compared to ultrasound Doppler imaging. Because typical ULM acquisitions accumulate large numbers of synthetic microbubble (MB) trajectories over hundreds of cardiac cycles, transient hemodynamic variations such as pulsatility...
journal article 2022
document
Ocadiz flores, J.A. (author), Rooijakkers, B.A.S. (author), Konings, R. (author), Smith, A.L. (author)
Corrected excess Gibbs energies of the liquid solutions in the ACl-ThCl4 (A = Li, Na, K), as well as revised standard enthalpies of formation and standard entropies of the intermediate phases occurring in the binary systems, are presented. The phase diagrams are reproduced to a similar level of accuracy as in the original publication, and the...
journal article 2022
document
Xia, P. (author), Vercruysse, F. (author), Celada-Casero, Carola (author), Verleysen, P. (author), Petrov, R.H. (author), Sabirov, I. (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Linke, B. (author), Frometa, D. (author)
The article focuses on the effect of alloying and microstructure on formability of advanced high strength steels (AHSSs) processed via quenching and partitioning (Q&amp;P). Three different Q&amp;P steels with different combination of alloying elements and volume fraction of retained austenite are subjected to uniaxial tensile and Nakajima...
journal article 2022
Searched for: +
(41 - 60 of 372)

Pages