Searched for:
(1 - 20 of 294)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Yang, Meng (author)
Following the chair of Methods and Analysis, the Graduation studio took place in Casablanca, Morocco. The theme of the studio fell into the frame “constructing the commons”, which focused on the everyday life and everydayness of space. The design studio laid stress on two repeating loops as central approaches towards design. The loop of research...
master thesis 2019
document
Chen, Min (author), Jia, Zihao (author), Tang, Hailong (author), Xiao, Yi (author), Yang, Yonghang (author), Yin, F. (author)
Supersonic civil aircraft is of a promising area in the development of future civil transport, and aircraft propulsion system is one of the key issues which determine the success of the aircraft. To get a good conceptual design and performance investigation of the supersonic civil aircraft engine, in this article, a fast, versatile as well as...
journal article 2019
document
Ren, M. (author), Wang, Shuzhong (author), Yang, Chuang (author), Xu, Haitao (author), Guo, Yang (author), Roekaerts, D.J.E.M. (author)
This work reports an experimental study on supercritical water oxidation of quinoline. Moderate preheat temperature (420 °C–510 °C) and initial concentration (1 wt%–10 wt%) are selected to address the possibility of utilizing the heat released during the reaction, in order to realize high conversion rate at relatively low preheat temperature....
journal article 2019
document
Gao, Yuan (author), Qiao, Tiezhu (author), Zhang, Haitao (author), Yang, Yi (author), Pang, Y. (author), Wei, Hongyan (author)
During the operation of the belt conveyor, measuring speed of the belt conveyor is vital to the safe and efficient operation. In the existing measuring speed system, the measurement instrument is required contacting with the surface of the belt. The contact measurement method cannot avoid the occurrence of measuring error caused by slipping...
journal article 2019
document
Yang, Z. (author), Deng, X. (author), Li, Z. (author)
The modeling of dynamic frictional rolling contact is crucial for accurately predicting behavior and deterioration of structures under dynamic interactions such as wheel/rail, tire/road, bearings and gears. However, reliable modeling of dynamic frictional rolling contact is challenging, because it requires a careful treatment of friction and...
journal article 2019
document
Azof, Fabian Imanasa (author), Yang, Y. (author), Panias, Dimitrios (author), Kolbeinsen, Leiv (author), Safarian, Jafar (author)
slags in alkaline solution at atmospheric pressure have been studied. The purpose of the study is to have a better understanding of the leaching part of the Pedersen process, as an alternative to the Bayer process for alumina production. The...
journal article 2019
document
Gao, Weilun (author), Shao, Dongdong (author), Wang, Zhengbing (author), Nardin, William (author), Rajput, Prateek (author), Yang, W. (author), Sun, Tao (author), Cui, Baoshan (author)
Rivers, regardless of their scales and geographic locations, are characterized with natural and human-induced variability in their discharges. While previous studies have established the effects of both interannual and intra-annual variabilities of unsteady river discharge on delta morphological evolution, the long-term cumulative effects of...
journal article 2019
document
Wang, H. (author), Lu, Guoyang (author), Feng, Shuyin (author), Wen, Xiaobo (author), Yang, Jun (author)
on the electrical and thermal conductivity, conventional physical properties,...
journal article 2019
document
Borra, C.R. (author), Vlugt, T.J.H. (author), Spooren, Jeroen (author), Nielsen, Lars Peter (author), Yang, Y. (author), Offerman, S.E. (author)
) is its use in glass polishing. About 16,000 tonnes of rare earth oxides, which is about 10% of total rare earth production, are used for polishing applications. The waste generated in glass polishing contains rare earths, along with other impurities. In this study, two different glass...
journal article 2019
document
Ma, Jiaming (author), Wei, Yinping (author), Gan, Lin (author), Wang, C. (author), Xia, Heyi (author), Lv, Wei (author), Li, Jia (author), Li, Baohua (author), Yang, Quan Hong (author), Kang, Feiyu (author), He, Yan Bing (author)
(LTO) microspheres consisting of densely packed primary nanoparticles. The real space distribution of lithium ions inside the...
journal article 2019
document
Yang, Z. (author), Li, Z. (author)
Complex frictional rolling contact and high-frequency wheel dynamic behavior make modeling squeal greatly challenging. The falling-friction effect and wheel mode-coupling behavior are believed to be the two main mechanisms that generate unstable wheel vibration and the resulting squeal noise. To rigorously consider both mechanisms in one...
journal article 2019
document
Lantsoght, E.O.L. (author), Yang, Y. (author), van der Veen, C. (author), Hordijk, D.A. (author), de Boer, A (author)
Existing bridges with large uncertainties can be assessed with a proof load test. In a proof load test, a load representative of the factored live load is applied to the bridge at the critical position. If the bridge can carry this load without distress, the proof load test shows experimentally that the bridge fulfills the requirements of the...
journal article 2019
document
Zhao, Ze Xin (author), Lan, Dongming (author), Tan, Xiyu (author), Hollmann, F. (author), Bornscheuer, Uwe T. (author), Yang, Bo (author), Wang, Yonghua (author)
in the past have mostly focused on...
journal article 2019
document
Chen, X (author), Yang, Y. (author), Evangeliou, P. (author), Van Der Ham, H. (author)
As the bridge stock in The Netherlands and Europe is ageing, various methods to analyse the capacity of existing bridges are being studied. Proof load testing is one of the method to test the capacity of bridges by applying loads on the existing concrete bridges with small spans. Because of the fact that neither the actual traffic load nor the...
conference paper 2019
document
Liles, S. D. (author), Li, R. (author), Yang, C. H. (author), Hudson, F. E. (author), Veldhorst, M. (author), Dzurak, Andrew S. (author), Hamilton, A. R. (author)
Valence band holes confined in silicon quantum dots are attracting significant attention for use as spin qubits. However, experimental studies of single-hole spins have been hindered by challenges in fabrication and stability of devices capable of confining a single hole. To fully utilize hole spins as qubits, it is crucial to have a detailed...
journal article 2018
document
Yang, Hongyu (author)
Occlusion and crossing in Multi-Person Tracking always influence the tracking results. In this paper, we show how deep Re-Identification (ReID), which aims at matching pedestrians across non-overlapping video cameras, can be used to improve the occlusion problem on tracking. The learned ReID feature is more robust than other features used in...
master thesis 2018
document
Yang, Y. (author)
In recent decades, the availability of a large amount of data has propelled the field of machine learning enormously. Machine learning, however, relies heavily on the availability of annotated data, typically labels indicating to which class a data instance belongs. With the huge amounts of data, this raises the question of how to efficiently...
doctoral thesis 2018
document
Oudenbroek, Kevin (author), Naderi, Nader (author), Bricker, J.D. (author), Yang, Y. (author), van der Veen, C. (author), Uijttewaal, W.S.J. (author), Moriguchi, Shuji (author), Jonkman, Sebastiaan N. (author)
In countries with steep rivers, such as Japan and the United States, bridges fail on an annual basis. Bridges on spread footings are especially susceptible to failure by hydrodynamic loading, often exacerbated by debris damming. Here, such failures are investigated via small scale model laboratory experiments and full scale numerical...
journal article 2018
document
Borra, C.R. (author), Vlugt, T.J.H. (author), Yang, Y. (author), Offerman, S.E. (author)
Ceria is the main component in glass polishing powders due to its special physico-chemical properties. Glass polishing powder loses its polishing ability gradually during usage due to the accumulation of other compounds on the polishing powder or due to changes in the particle size distribution. The recovery of cerium from the glass polishing...
journal article 2018
Searched for:
(1 - 20 of 294)

Pages