Searched for: +
(1 - 20 of 159)

Pages

document
Yao, Liaojun (author), Chuai, Mingyue (author), Lyu, Zhangming (author), Chen, Xiangming (author), Guo, Licheng (author), Alderliesten, R.C. (author)
Methods based on fracture mechanics have been widely used in fatigue delamination growth (FDG) characterization of composite laminates. These methods are based on the similitude hypothesis. It is therefore important to have appropriate parameters to well represent the similitude, which is useful for fatigue delamination test standard...
journal article 2024
document
Xue, Fei (author), Yao, Enjian (author), Cherchi, Elisabetta (author), Correia, Gonçalo (author)
Difficulty in finding parking spaces and high parking fees discourage private car usage. Fully autonomous vehicles (AVs) capable of self-parking away from destinations will likely remove this barrier. Despite extensive survey-based research on AVs in recent years, existing literature has not sufficiently addressed the potential impact of new...
journal article 2024
document
Yao, Liaojun (author), Wang, Jiexiong (author), He, Yonglyu (author), Zhao, Xiuhui (author), Chen, Xiangming (author), Liu, J. (author), Guo, Licheng (author), Alderliesten, R.C. (author)
Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...
journal article 2024
document
Yao, L. (author), Chuai, Mingyue (author), Li, Hanyue (author), Chen, Xiangming (author), Quan, D. (author), Alderliesten, R.C. (author), Beyens, M. (author)
Temperature can significantly affect fatigue delamination growth (FDG) behavior in composites, while fiber bridging has been frequently reported during FDG. The focus of this study was therefore on investigating temperature effects on FDG behavior with fiber bridging. Mode I fatigue delamination experiments were conducted on a thermoset...
journal article 2024
document
Wang, Q. (author), Zhou, Dong (author), Zhao, C. (author), Wang, Jianlin (author), Guo, Hao (author), Wang, Liguang (author), Yao, Zhenpeng (author), Lu, Jun (author), Wagemaker, M. (author)
Sodium-ion batteries have not only garnered substantial attention for grid-scale energy storage owing to the higher abundance of sodium compared with lithium, but also present the possibility of fast charging because of the inherently higher sodium-ion mobility. However, it remains a phenomenal challenge to achieve a combination of these...
journal article 2024
document
Wang, Q. (author), Zhou, Yunan (author), Wang, Xuelong (author), Guo, Hao (author), Gong, Shuiping (author), Yao, Zhenpeng (author), Ganapathy, S. (author), Zhao, C. (author), Wagemaker, M. (author)
All-solid-state lithium batteries have attracted widespread attention for next-generation energy storage, potentially providing enhanced safety and cycling stability. The performance of such batteries relies on solid electrolyte materials; hence many structures/phases are being investigated with increasing compositional complexity. Among the...
journal article 2024
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Djelloul-Khedda, Zakarya (author), Peng, Fei (author), Yao, Y. (author), Dong, J. (author)
In this article, a nonlinear semianalytical model (SAM) is presented to predict the magnetic field distribution (MFD) and electromagnetic performances (EPs) in the cubic spoke-type permanent magnet (PM) machine. To model the rectangular PMs, the rectangular PM is simplified as a combination of fan-shaped regions with different arc angles....
journal article 2024
document
Agugiaro, G. (author), Pantelios, Konstantinos (author), León Sánchez, C.A. (author), Yao, Zhihang (author), Nagel, Claus (author)
This paper introduces a new plug-in for QGIS that allows to connect to the free and open-source 3D City Database to load CityGML data, structured as classic GIS layers, into QGIS. The user is therefore not required to be a CityGML specialist, or a SQL expert, as the plug-in takes care of hiding from the user most of the complexity in terms of...
conference paper 2024
document
Yao, X. (author)
Comfort, which is defined as “a pleasant state or relaxed feeling of a human being in reaction to its environment”, plays an important role in air travel both for passengers and airlines. However, the combination of strict safety regulations, limited space, and a large variation in passenger body types make aircraft cabins challenging...
doctoral thesis 2023
document
Yao, Zhongbo (author)
This thesis aims at maximizing the profit of a strawberry producer while satisfying the retailer's demand and meeting other constraints. The amount of strawberries to be delivered to the retailer signed in the contract is the main decision variable to be optimized in the problem. Furthermore, the transportation scheduling is also optimized to...
master thesis 2023
document
Yao, Qian (author)
Polders in the Taihu basin have a history of over two thousand years. The low-lying topography and dense water network create convenient geographical conditions for the reclamation of polders. Later, with the rapid population growth, mulberry-dike-fish-pond was constructed in order to make full use of the limited land resources, which is a...
master thesis 2023
document
Yao, Yunsong (author)
master thesis 2023
document
Yao, Shunyu (author)
Antibiotic susceptibility test (AST) shows the efficacy of antibiotics against different strains and is frequently applied in finding new antibiotics, bacteria identification, and clinical analysis. The tests provide scientific evidence for finding pathogens and avoiding the misuse of antibiotics.<br/><br/>The first AST was invented by Alexander...
master thesis 2023
document
Yang, G. (author), Gram, Remon (author), Procel Moya, P.A. (author), Han, C. (author), Yao, Z. (author), Singh, M. (author), Zhao, Y. (author), Mazzarella, L. (author), Zeman, M. (author), Isabella, O. (author)
Passivating contacts based on poly-Si have enabled record-high c-Si solar cell efficiencies due to their excellent surface passivation quality and carrier selectivity. The eventual existence of pinholes within the ultra-thin SiOx layer is one of the key factors for carrier collection, beside the tunneling mechanism. However, pinholes are usually...
journal article 2023
document
Zhang, R. (author), Chen, Y. (author), Yao, P. (author), Stive, M.J.F. (author), Zeng, Jian (author)
Coastal permeable groins have been used to protect beaches from erosion for centuries. However, the hydraulic functioning of permeable groins has not been fully understood and their design heavily depends on engineering experiences. In this study, numerical experiments were executed to investigate the effects of layout configurations of a...
journal article 2023
document
Wang, Q. (author), Zhao, C. (author), Yao, Zhenpeng (author), Wang, Jianlin (author), Wu, Fangting (author), Kumar, Sai Govind Hari (author), Ganapathy, S. (author), Eustace, S.J. (author), Wagemaker, M. (author)
Developing liquid electrolytes with higher kinetics and enhanced interphase stability is one of the key challenges for lithium batteries. However, the poor solubility of lithium salts in solvents sets constraints that compromises the electrolyte properties. Here, it is shown that introducing multiple salts to form a high-entropy solution,...
journal article 2023
document
Quan, D. (author), Liu, Jiaming (author), Yao, L. (author), Dransfeld, C.A. (author), Alderliesten, R.C. (author), Zhao, Guoqun (author)
The production of advanced composites from recycled carbon fibres (rCFs) is critical for the sustainable development of carbon fibre industry. Herein, non-woven mats consisting of commingled rCFs and Polyphenylene-sulfide (PPS) fibres were compression moulded to manufacture rCF/PPS composites, with the fibre/matrix adhesion being tailored by...
journal article 2023
document
Zhu, Jia-Ning (author), Liu, K. (author), Riemslag, A.C. (author), Tichelaar, F.D. (author), Borisov, Evgenii (author), Yao, Xiyu (author), Popovich, Anatoly (author), Huizenga, R.M. (author), Hermans, M.J.M. (author), Popovich, V. (author)
Superelastic metallic materials possessing large recoverable strains are widely used in automotive, aerospace and energy conversion industries. Superelastic materials working at high temperatures and with a wide temperature range are increasingly required for demanding applications. Until recently, high-temperature superelasticity has only...
journal article 2023
document
Yao, Liaojun (author), Chuai, Mingyue (author), Liu, J. (author), Guo, Licheng (author), Chen, Xiangming (author), Alderliesten, R.C. (author), Beyens, M. (author)
This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue...
journal article 2023
document
Yao, Z. (author), Yang, G. (author), Han, C. (author), Procel Moya, P.A. (author), Özkol, E. (author), Yan, J. (author), Zhao, Y. (author), Cao, L. (author), van Swaaij, R.A.C.M.M. (author), Mazzarella, L. (author), Isabella, O. (author)
Passivating contacts are crucial for realizing high-performance crystalline silicon solar cells. Herein, contact formation by plasma-enhanced chemical vapor deposition (PECVD) followed by an annealing step is focused on. Poly-SiO<sub>x</sub> passivating contacts by combining plasma-assisted N<sub>2</sub>O-based oxidation of silicon (PANO-SiO...
journal article 2023
Searched for: +
(1 - 20 of 159)

Pages