Cracking potential of alkali-activated slag and fly ash concrete subjected to restrained autogenous shrinkage

This study aims to investigate the cracking potential of alkali-activated slag (AAS) and alkali-activated slag-fly ash (AASF) concrete subjected to restrained autogenous shrinkage. Temperature Stress Testing Machine (TSTM) is utilized, for the first time, to monitor the stress evolution and to measure the cracking time of alkali-activated...

Molecular dynamics and experimental study on the adhesion mechanism of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper aims to study the adhesion mechanism of polyvinyl alcohol (PVA) fiber within alkali-activated slag/fly ash (AASF) matrix using molecular dynamics (MD) simulation in combination with systematic experimental characterization. The adhesion of PVA to C-(N-)A-S-H gel with different Ca/(Si+Al) and Al/Si ratios was modeled using MD...

Cracking Potential of Alkali-Activated Concrete Induced by Autogenous Shrinkage

Alkali activated concrete (AAC) has not received broader industry acceptance, one reason of which lies in the uncertainties in the durability against shrinkage and potential cracking. Many studies reported that AAC exhibit larger autogenous shrinkage than OPC concrete. However, it is unable to deduce that AAC should show higher cracking...

Strain hardening behaviour of PVA fibre reinforced geopolymer composites

Strain hardening geopolymer composites (SHGC) as a tailored group of fibre reinforced geopolymer composites are featured by large tensile strain capacity with multiple micro-cracks. This paper experimentally investigates the strain hardening behaviour of SHGC in terms of flexural stress-deflection response, failure mode and cracking, flexural...

Rheology of alkali-activated slag pastes: New insight from microstructural investigations by cryo-SEM

This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryogenic scanning electron microscopy (cryo-SEM) revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical...

Micromechanics-guided development of strain-hardening alkali-activated composites: Towards a low-carbon built environment

Alkali-activated Materials (AAMs), including those classified as geopolymer, are obtained through the reaction between a solid precursor and an alkaline solution. Compared with ordinary Portland cement (OPC) binders, these materials maintain comparable mechanical properties but have the advantage of reducing greenhouse gas emissions and...

Reactivity and leaching potential of municipal solid waste incineration (MSWI) bottom ash as supplementary cementitious material and precursor for alkali-activated materials

This work evaluated the reactivity and leaching potential of municipal solid waste incineration (MSWI) bottom ash as supplementary cementitious material (SCM) and precursor for alkali-activated materials (AAM). The chemical composition of the amorphous phase in MSWI bottom ash was found to be in the same range as that of Class F coal fly ash....