Temperature dependent trap characterisation and modelling of silicon carbide MOS capacitor

Due to the deficient passivation of the interface between silicon carbide and silicon dioxide, the defect-induced capture and release of trapped charges triggered by external Bias Temperature Stress (BTS) leads to parameter shifts and degraded device performance. This study models the trap-induced transient current in silicon carbide metal-oxide...

A Highly Linear Temperature Sensor Operating up to 600°C in a 4H-SiC CMOS Technology

In this work, a highly linear temperature sensor based on a silicon carbide (SiC) p-n diode is presented. Under a constant current biasing, the diode has an excellent linear response to the temperature (from room temperature to 600°C). The best linearity (coefficient of determination ${R}^{{2}}$ = 99.98%) is achieved when the current density...

A Thin and Low-Inductance 1200 V SiC MOSFET Fan-Out Panel-Level Packaging With Thermal Cycling Reliability Evaluation

SiC MOSFET is mainly characterized by the higher electric breakdown field, higher thermal conductivity, and lower switching loss enabling high breakdown voltage, high-temperature operation, and high switching frequency. However, their performances are considerably limited by the high parasitic inductance and poor heat dissipation capabilities...

Microfabricated albedo insensitive sun position sensor system in silicon carbide with integrated 3D optics and CMOS electronics

The next generation of satellites will need to tackle tomorrow's challenges for communication, navigation and observation. In order to do so, it is expected that the amount of satellites in orbit will keep increasing, form smart constellations and miniaturize individual satellites to make access to space cost effective. To enable this next...

Design of a Fan-Out Panel-Level SiC MOSFET Power Module Using Ant Colony Optimization-Back Propagation Neural Network

A new panel-level silicon carbide (SiC) metal oxide semiconductor field effect transistor (MOSFET) power module was developed by using the fan-out and embedded chip technologies. To achieve the more effective thermal management and higher reliability under thermal cycling, a new optimization method called Ant colony optimization-back...

Toward a Self-Sensing Piezoresistive Pressure Sensor for all-SiC Monolithic Integration

This work focusses on the design and fabrication of surface micromachined pressure sensors, designed in a modular way for the integration with analog front-end read-out electronics. Polycrystalline 3C silicon carbide (SiC) was used to fabricate free-standing high topography cavities exploiting surface micromaching. The poly-SiC was in-situ...