Antimicrobial properties dependence on the composition and architecture of copper-alumina coatings prepared by plasma electrolytic oxidation (PEO)

This study presents environmentally friendly and low-cost synthetic routes to produce antimicrobial coatings over 5052 Al alloy based on plasma electrolytic oxidation (PEO) technology. Two methodologies were explored: the decoration with copper and anodic doping with copper ions. The porous oxide layers produced in silicate media presented...

Corrosion and passive film characteristics of 3D-printed NiTi shape memory alloys in artificial saliva

Electrochemical tests and surface analysis were applied to study the corrosion behavior and passive film characteristics of three-dimensional-printed NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF) in artificial saliva at 37 °C. The passivity of L-PBF NiTi shows to be influenced by the process parameters and resulting...

Fabrication of graphene oxide-modified self-healing microcapsules for Cardanol-based epoxy anti-corrosion coatings

In this paper, graphene oxide (GO) modified microcapsules have been developed for use in self-healing Cardanol-based epoxy anti-corrosion coatings on steel substrates. The microcapsules had a polymethyl methacrylate (PMMA) shell, covered with aminated GO flakes and contained either of the two complementary healing agents mixed with nanosized...

Improved corrosion protection of titanium implant material by crystallographic texturing of Sr doped calcium phosphate electrodeposits

Nanocrystalline calcium phosphate (CaP) coatings can provide biocompatibility and corrosion protection to biomaterials upon implementation in the human body. While the long term stability of recently developed coatings in biological environment proves to be challenging, the present work tailors the surface by orienting the growth ...

An investigation on the hardness and corrosion behavior of MWCNT/Mg composites and grain refined Mg

In the present work, multi walled carbon nanotubes (MWCNT) reinforced magnesium (Mg) matrix composite was fabricated by friction stir processing (FSP) with an aim to explore its mechanical and electrochemical behavior. Microstructural observations showed that the thickness of the produced composite layer was in the range of 2500 μm. FSP...

Long-term outdoor stress corrosion testing of overaged 7000 series aluminium alloys

Long-term outdoor stress corrosion tests were executed on overaged 7000 series aluminium alloy plate and forgings. Plate material of the alloys 7010-T7651, 7010-T7451 and 7075-T7351 exhibited an excellent resistance to SCC. PM alloy X7091-T7E69 forgings combined a higher strength with superior SCC resistance as compared to IM alloy forgings. The...

Stress corrosion crack initiation testing of high strength aluminium alloys using tuning fork type specimens

An experimental investigation was carried out into the applicability of various corrosive environments for stress corrosion crack initiation testing of high strength aluminium alloys using constant strain loaded tuning fork type specimens. The effect of surface preparation was also involved. The most important findings were that salt-chromate...

Influence of environmental ageing and displacement rate on crack resistance of adhesives, as determined on adhesive bonded TDCB-specimens

Fracture toughness measurements were carried out to test the ageing behaviour of three adhesives in different environments. It was possible to compare and evaluate adhesives and surface pretreatments. It is doubtful whether the derived R-curves could be used for residual strength calculations in certain environments. Phosphoric acid anodizing...