Searched for: +
(1 - 20 of 28)

Pages

document
Twigt, Tom (author)
The European offshore wind industry has experienced significant growth in the past decade, mainly focusing on shallow areas in the North Sea to reduce the Levelised Cost of Electricity (LCoE) and compete with fossil fuels. However, as shallow areas become scarcer and the industry seeks greater independence from government subsidies, a shift...
master thesis 2024
document
Firman Habib, F (author)
Large-diameter monopiles serve as foundations for offshore wind turbines (OWT), and the diameters are now up to 10 meters. These monopiles exhibit lower embedded length-to-diameter (L/D) ratios compared to the conventional monopile that is widely employed in offshore oil and gas platforms. They undergo rotation when subjected to lateral loading...
master thesis 2023
document
Dijksman, Brice (author)
To support offshore wind turbines (OWT), monopiles are currently the most frequently used foundation method. These monopiles are open-ended steel tubes with a diameter of 5 - 12 m, which are most often installed in the seabed by means of hydraulic impact hammering usually mounted...
master thesis 2023
document
de Jong, Daan (author)
Reducing noise pollution during offshore monopile installation is crucial for marine life. Current installation methods create too much noise or do not have the certainty of reaching the required depths. By using a Vibrohammer combined with a Jet-ring this problem could be solved. A Jet-ring is a tool to reduce the sand induced inside shaft...
master thesis 2023
document
van der Stap, Florian (author)
The increasing popularity of offshore wind as a result of the demand for renewable energy, forces the industry to consider the development of wind farms in sub-arctic areas. One of these areas is the Baltic Sea, where the potential for wind energy is very large, but which is also prone to the occurrence of ice. For the design of offshore...
master thesis 2022
document
Bărbunţoiu, Teodora (author)
Deployment of renewable energy is essential to reach a carbon neutral economy. Offshore wind farms have caught the interest of many developed countries since they are an essential source of green energy. The interest of this thesis lays in the design of the foundation used for offshore wind farms, in particular the interaction between the...
master thesis 2021
document
Verbruggen, Jaap (author)
Using a floating vessel operating on its DP-system and using a motion-compensated pile gripper to install monopiles could be the installation method of the future. Therefore, this thesis focuses on this method. The main objective of this thesis project is to build a model that accurately describes the motions of the Stella Synergy, the monopile,...
master thesis 2021
document
Li, Q. (author)
Although wind energy capacity has increased significantly in the last few decades, the installed capacity of offshore wind turbine still lags far behind that of onshore wind turbines due to the installation and foundation cost. The aim of this research project has been to clarify the influence of combined vertical and lateral loads, lateral...
doctoral thesis 2020
document
Liu, H. (author)
The wind energy industry has gained a key role in the global fight against greenhouse gas emissions. Although fossil fuels have still the largest share in the global energy mix, the production of wind energy, especially offshore, has rapidly grown since the 1990s. According to the International Energy Association, Europe targets offshore wind to...
doctoral thesis 2020
document
Broersen, Tijn (author)
The number of offshore wind farms is growing rapidly, which increases the likelihood of ship collisions with offshore wind turbines. Additionally, the cost of energy reduction for wind turbines is achieved due to radical design optimizations. Therefore, simple methods should be obtained to determine the offshore wind turbine response during ship...
master thesis 2020
document
Panagoulias, Stavros (author), Nernheim, Axel (author), Lisi, Diego (author), Lahoz, Miquel (author), Brinkgreve, R.B.J. (author)
Single large diameter piles, known as monopiles, are, nowadays, the most common foundation type for offshore wind turbines (OWT). Several research initiatives have been focusing on improving the conventional design practice. The PISA (Pile Soil Analysis) joint industry research project resulted in a proposal for a new design methodology for OWT...
conference paper 2020
document
Blok, Sanne (author)
Offshore wind turbines are commonly supported by monopile foundations. Impact hammering is the conventional method for installing offshore monopiles but has several disadvantages. Time-consuming installation procedures, high noise emissions and steel fatigue due to the high impact are problems resulting from this installation procedure. GBM...
master thesis 2019
document
Misios, George (author)
Wind turbines constitute a sustainable and effective solution to produce energy using wind power. Offshore wind turbines are becoming of special interest and more demanding with continuously increased diameters. However, their design poses great challenges, since the installation and fabrication tolerances in combination with high cyclic loading...
master thesis 2019
document
Hasper, Youri (author)
With increasing evidence of human-induced accelerated climate change, the need of sustainable, non-polluting, energy sources becomes evident. Offshore wind generated electricity is currently one of the most promising sources of energy to create a sustainable global energy mix. The offshore wind industry has developed rapidly over the last years....
master thesis 2019
document
Chortis, Giorgos (author)
Wind turbines are nowadays the main means for producing renewable energy in Northern and Western Europe, and therefore research is conducted to secure their efficiency. One of the critical aspects of the windfarms is the foundation type, as it can define the functionality and the cost of each turbine. Monopiles have prevailed as the most...
student report 2018
document
Kementzetzidis, Evangelos (author)
In recent years, offshore wind is becoming an increasingly growing market in Europe. Many resources are allocated towards ensuring its sustainable progress while one of the biggest uncertainties encountered lays in the offshore wind turbine's (OWT) foundations. In Europe, monopiles are the most widely adopted solution to found such structures in...
master thesis 2017
document
Charalambous, Chris (author)
The rapid rate in technological advancements leaves little to none options for our environment to react. The excessive use of "conventional" energy is bringing planet Earth to its knees. However, people started recognizing the value of renewable energy sources.<br/>One of the major renewable sources is the wind energy. The wind energy can be...
master thesis 2017
document
Pisano, F. (author), Corciulo, S. (author), Zanoli, Omar (author)
The increasing relevance of offshore wind in the energy mix motivates continual research efforts for the optimisation of foundation systems. Currently, monopiles are still the most common foundations for offshore wind turbines (OWTs), due to their simplicity and the low costs for production/assembly. However, the modern trends towards larger...
conference paper 2017
document
Rosales Gonzalez, M.L. (author)
With the depletion of traditional energy sources, the usage of renewable energy alternatives has increased over the past years. Among them, wind energy is considered as one of the most economical and environmentally friendly alternatives, and is seen as one of the main sources of energy in the future. A very promising field in the area of wind...
master thesis 2016
document
Crol, J.B. (author)
The subject of this report is the upending of a floating monopile for an offshore wind turbine foundation. This is an assignment of Van Oord Dredging and Marine Contractors BV. An analytical model has been developed to simulate the upending of a monopile in MapleTM, based on the general theoretical principles and the experience of Van Oord. An...
master thesis 2015
Searched for: +
(1 - 20 of 28)

Pages