- document
-
Voorendt, M.Z. (author), Molenaar, W.F. (author), Bezuyen, K.G. (author)Lecture notes CT3330. Introduction, history of caissons, construction of standard caisson, design of standard caisson, construction of pneumatic caissons.lecture notes 2011
- document
-
De Lange, M. (author)This report describes the influence of the slope angle of a breakwater slope, the density of the concrete of the Xbloc armour unit, the vertical position of the Xbloc on the breakwater slope and the roughness of the under layer of the breakwater on the extraction force of an Xbloc armour unit. By testing the extraction force, indirectly the...student report 2010
- document
-
Heuts, R.A.R. (author)Along the northern coast of Morocco order has been given for the construction of a large transshipment port in the Mediterranean Sea, at a designated project location around the city of Nador. On this green-field coastal stretch a new transhipment port will have to be developed for various types of cargo. Throughputs of the terminals will have...master thesis 2010
- document
-
Lioutas, A.C. (author)The overtopping empirical formulas calculate the discharge only at the top of the crest of a coastal protection structure. On the other hand, the tolerable overtopping discharges are defined at certain points behind the crest where the total overtopping is reduced. The scope of this thesis is to find an empirical formula to describe the...master thesis 2010
- document
-
Afridi, Z.N. (author)The purpose of this report is to investigate the differences in overtopping characteristics over the crest of a rubble mound breakwater when the crest is made either impermeable or permeable. Among numerous characteristics that are effected by a modification in the permeability of the crest, this report looks specifically into three separate...student report 2010
- document
-
Mulders, P.H.M. (author)During the construction of breakwaters contractors often encounter undesired reshaping of exposed core material. This reshaping is comparable to the deformation process of berm breakwaters in which the outer profile reshapes into a more stable s-curve. In the case of oblique waves this deformation is enhanced by a longshore transport of stones...master thesis 2010
- document
-
Kersten, M.K. (author)Albania has the following major sea ports: Durrës, Vlora, Sarandë and Shëngjin. The port of Durrës has the biggest share in the volume of import/export in Albania, nearly 75%. Due to current development rates, limited possibilities for expansion and pollution in the city because of its vicinity to the port, projects are identified to construct a...master thesis 2010
- document
-
Verhagen, H.J. (author)In the ROCK MANUAL (2007) some guidance is given for the design of toes for breakwaters. However, for very shallow toes, as well as for very wide toes (or berms) this guidance is only marginally. Recently a number of shallow berms and toes have been constructed, partly with the intention to lower the height of the breakwater. These works showed...conference paper 2010
- document
-
Van der Linde, J.P. (author)Two dimensional physical model tests are executed with Xbloc armour units on low crested structures to answer the objective. On the basis of findings in the literature study it can be expected that the stability of the Xbloc elements on low-crested breakwaters is a function of crest freeboard and crest width. The crest freeboard (Rc/Dn) varied...master thesis 2009
- document
-
Van Buchem, R.V. (author)In an attempt to reduce the cost of breakwaters, several elements have been developed. Examples are Accropodes, Tetrapods and concrete cubes. Previous tests were performed with armour layers consisting of a double layer of cubes. This study is based on a single layer of cubes. The great benefit of a single layer of cubes is that it reduces the...master thesis 2009
- document
-
Schoolderman, J.E. (author)The purpose of this thesis was to develop a preliminary concept design of a wave energy converter. The type of device designed was limited by several starting points which stipulated, among other criteria, a robust structure which can be constructed within a breakwater and can generate electricity from a fairly mild (in the order of Hs=0.5-1.5m)...master thesis 2009
- document
-
Van Zwicht, B.N.M. (author)This thesis is about the influence of the specific weight on the stability of single layer interlocking armour units on rubble mound breakwaters. The hydraulic stability of the Xbloc armour unit is expressed by the stability number which is based on the assumption of dominance of lift, drag and gravity forces. If other forces have significant...master thesis 2009
- document
-
Allsop, N.W.H. (author), Cork, R.S. (author), Verhagen, H.J. (author)This paper introduces a co-operative project between HR Wallingford UK (HRW) and Delft University of Technology, Netherlands, (TUD) to develop, populate, and then to apply a database on all major breakwaters around the world. It builds on, and revives, similar initiatives that originate in the late 1970s. The paper describes the objectives in...conference paper 2009
- document
-
Verhagen, H.J. (author), Mertens, M. (author)In the Rock Manual [2007] two sets of equations for the determination of rock stability in breakwaters armour layers are presented. One set is the original formula presented by Van der Meer [1988], valid for deep water conditions. This set uses the parameters Hs and Tm. The other set is an adaptation of these formulae, using the parameters H2%...conference paper 2009
- document
-
Nammuni-Krohn, J. (author)Measurements of flow velocities due to wave action on top of shallow toe structures in front of a rubble mound breakwater. Laboratory tests in the Fluid Mechanics lab, TU Delft.student report 2009
- document
-
Sveinbjornsson, P.I. (author)A major part of the breakwaters constructed in the world are the so-called conventional rouble mound breakwaters, which consist of a core, a filter layer and a heavy armour layer. An alternative to the conventional rouble mound breakwater is a berm breakwater. Berm breakwaters have mainly developed in two directions over the last couple of...master thesis 2008
- document
-
Dijkstra, O.P.J. (author)In coastal regions where the land is sensitive to erosion, but also for harbours and ports, numerous types of defensive structures have been developed to protect it from the effects of incident waves. More recently breakwaters have been constructed which combine the stability characteristics of a conventional two-layered uniform sloped...master thesis 2008
- document
-
De Rover, R. (author), Verhagen, H.J. (author), Van den Berge, A. (author), Reedijk, B. (author)The effect of single layer interlocking armour unit breakage on the hydraulic armour layer stability and potential damage progression is addressed in this paper. A 2-dimensional scale model of a rubble mound breakwater with an armour layer consisting of Xbloc armour units was tested. The residual armour layer stability with broken units was...conference paper 2008
- document
-
Fozein Kwanke, N.J.C. (author)One of the most basic types of breakwaters is the rubble mound breakwater which in essence is a heap of stones consisting of a core of fine material covered by an armour layer of big rock or concrete elements. Mostly unreinforced, these concrete elements exist in different sizes and geometries varying from massive concrete cubes to more...master thesis 2007
- document
-
De Rover, R.A. (author)At breakwater and seawall projects at Port St Francis and Scarborough breakage of single layer interlocking armour units was observed. It is generally assumed that breakage of single layer armour units has a significant negative effect on the hydraulic stability of a rubble mound breakwater. The significant decrease of interlocking capacity and...master thesis 2007