Searched for: +
(61 - 80 of 222)

Pages

document
Chen, Kequan (author), Knoop, V.L. (author), Liu, Pan (author), Li, Zhibin (author), Wang, Yuxuan (author)
The pre-insertion process called anticipation is an essential component of a lane-changing manoeuvre. There is little empirical research regarding the impact of anticipation. Thus, this paper aims to explore the behaviour of the new follower (NF) in the target lane when it encounters anticipation by using new trajectory datasets. The changing...
journal article 2023
document
Li, Shizhen (author), Jiang, Jing (author), Liu, X. (author), Wang, S. (author), Zhang, Zhonghua (author), Ye, Huaiyu (author)
Substrate metallization is a crucial factor affecting the mechanical properties of sintered nanoparticles in microelectronics applications, as it is essential for ensuring good adhesion between the substrate and the sintered material. In this study, we investigated the influence of metallization on pressure-assisted nanocopper sintering and...
conference paper 2023
document
Wang, S. (author), Tan, Yanlong (author), Liu, Xu (author), Li, Shizhen (author), Liu, Ke (author), Yuan, Wucheng (author), Li, Tao (author), Zhang, Kouchi (author), French, P.J. (author), Ye, Huaiyu (author), Tan, Chunjian (author)
In this article, the avalanche withstand capability and transient failure model of commercial 1200 V asymmetric trench gate SiC MOSFETs are investigated by experiment and simulation under single-pulse unclamped inductive switching (UIS) conditions. The limiting avalanche current and limiting avalanche energy of the device are determined by...
conference paper 2023
document
Zhang, Boyang (author), Sun, Xiuxia (author), Lv, Maolong (author), Liu, Shuguang (author), Li, Le (author)
In contrast with most existing results concerning unmanned aerial vehicles (UAVs) wherein material points or only attitude/longitudinal dynamics are considered, this article proposes a distributed fixed-time fault-tolerant control methodology for networked fixed-wing UAVs whose dynamics are six-degree-of-freedom with twelf-state-variables...
journal article 2022
document
Xin, Haohui (author), Li, Jie (author), Veljkovic, M. (author), Liu, Yuqing (author), Sun, Qing (author)
Bolted joints in steel structures are generally subject to combined actions. The research on ultimate capacity of bolted joints under combined tension and shear actions, twin shear actions, and combined tension-twin shear actions is relatively limited. The aim of this paper is to calibrate the fracture locus of grade 10.9 bolts using the...
journal article 2022
document
Li, Peng (author), Liu, Di (author), Baldi, S. (author)
Adaptive integral sliding mode control (AISMC) is an extension of adaptive sliding mode control which is a way to ensure sliding motion while handling system uncertainties. However, conventional AISMC formulations require to different extent a priori knowledge of the system uncertainty: either the upper bound of the uncertainty or of its time...
journal article 2022
document
Zuo, Renwei (author), Li, Yinghui (author), Lv, Maolong (author), Liu, Zongcheng (author), Zhang, Fan (author)
This article proposes an output-feedback fixed-time trajectory tracking control methodology for hypersonic flight vehicles subject to asymmetric output constraints. In contrast to the state of the art, the most distinguishing feature of our control design lies in avoiding using conventional recursive design methods (e.g., backstepping...
journal article 2022
document
Li, Bo (author), Liu, Qiuhong (author), Wang, T. (author), He, He (author), Peng, You (author), Feng, Tao (author)
Outdoor physical activities can promote public health and they are largely influenced by the built environment in different urban settings. Understanding the association between outdoor physical activities and the built environment is important for promoting a high quality of life. Existing studies typically focus on one type of outdoor activity...
journal article 2022
document
Jiang, Jing (author), Wang, S. (author), Liu, X. (author), Liu, Jianhui (author), Li, Jun (author), Zhou, Dexiang (author), Zhang, Kouchi (author), Ye, H. (author), Tan, C. (author)
High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...
journal article 2022
document
Xu, Yanghui (author), Ou, Q. (author), Li, Xiaoming (author), Wang, Xintu (author), van der Hoek, J.P. (author), Liu, Gang (author)
The transport and fate of nanoplastics (NPs) in aquatic environments are closely associated with their colloidal stability, which is affected by aging and natural organic matter (NOM) adsorption. This study systematically investigated the combined effects of photoaging and NOM (e.g. humic acids, HA; and a model protein, bovine serum albumin, BSA...
journal article 2022
document
Zhu, Songfeng (author), Li, Xueyuan (author), Qu, Xinyi (author), Liu, Qi (author), Li, Z. (author)
This paper proposes a linear quadratic controller based on particle swarm algorithm for the rear wheel control of four-wheel steering vehicle. Particle swarm optimization with fitness functions is used to optimize the coefficients of the weight matrix offline. The fuzzy rules following the controller is used if the road condition is terrible....
conference paper 2022
document
Liu, Xinxin (author), Li, Shuoshuo (author), Liu, Liang (author), He, Chao (author), Sun, Zhuang (author), Özdemir, F. (author), Aziz, Muhammad (author), Kuo, Po-Chih (author)
Because of their compact structure, ease of processing and higher heat transfer coefficient, curved-tube heat exchangers are widely applied in various industry applications, such as nuclear power systems, solar-powered engineering, aircraft engine cooling systems and refrigeration and cryogenic systems. Accurate knowledge about the heat transfer...
journal article 2022
document
Li, Fang (author), Li, Xueyuan (author), Liu, Qi (author), Li, Z. (author)
Pedestrian detection is an important branch of computer vision, and it has important applications in the fields of autonomous driving, artificial intelligence and video surveillance.With the rapid development of deep learning and the proposal of large-scale datasets, pedestrian detection has reached a new stage and achieves better performance...
journal article 2022
document
Liu, X. (author), Li, Shizhen (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)
Nano copper sintering technology has great potential to be widely applied in the wide-bandgap semiconductor packaging. In order to investigate the coalescence kinetics of copper nano particles for this application, a molecular dynamic (MD) simulation was carried out at low temperature on a special model containing two substrate and multiple...
journal article 2022
document
Zuo, Renwei (author), Li, Yinghui (author), Lv, Maolong (author), Liu, Zongcheng (author), Dong, Zehong (author)
This article solves the fixed-time trajectory tracking problem for hypersonic flight vehicles (HFVs) encountered with diverse actuator faults and asymmetric envelope constraints. In contrast to the state of the art, the crucial characteristics of our design lie in obviating the explosion of complexity of the conventional recursive design, and...
journal article 2022
document
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...
journal article 2022
document
Peng, Shaoyuan (author), Liu, Y. (author), Li, Renge (author), Wei, Ying (author), Chan, Pak Wai (author), Li, Sunwei (author)
Simulating a typhoon’s wind field via mesoscale models is important in terms of providing not only the guidelines for urban planning and onshore/offshore constructions, but also the provision of insight into the dynamics and thermodynamics of tropical cyclone systems. Therefore, the errors that are contained in simulation results were...
journal article 2022
document
Li, Jun (author), Ren, Anran (author), van der Mark, Ed (author), Liu, G. (author)
Drinking water quality deteriorates from treatment plant to customer taps, especially in the plumbing system. There is no direct evidence about what the differences are contributed by plumbing system. This study compared the water quality in the water main and at customer tap by preparing a sampling tap on the water main. The biomass was...
journal article 2022
document
Masulli, Marco (author), Liu, Z. (author), Guo, Feng Zhi (author), Li, Xue (author), Sudhölter, Ernst J. R. (author), Kumar, N. (author)
Chemical loss such as surfactants and alkalis by adsorption to reservoir rock surface is an important issue in enhanced oil recovery (EOR). Here, we investigated the adsorption behaviors of anionic surfactants and alkalis on silica for the first time as a function of temperature using quartz crystal microbalance with dissipation (QCM-D). The...
journal article 2022
document
Chi, Lin (author), Li, Wenda (author), Li, Z. (author), Wang, Zheng (author), Lu, Shuang (author), Liu, Qi (author)
Alternative current impedance spectroscopy (ACIS) is a promising non-destructive testing method to monitor long-term change and assess the durability of concrete. This study investigates the influences of Ethylene Diamine Tetraacetic Acid (EDTA) on the hydration of hardening cement by ACIS. It is found that EDTA retards the early-age...
journal article 2022
Searched for: +
(61 - 80 of 222)

Pages