- document
-
Li, X.W. (author)Actually, not as often as you’d think. Statistics show the majority of car trips made in the Netherlands are on shorter distances. 80% of them are between 5 and 20 km and the car already after 2 km starts being a major part of urban transportation. On short distances (up to 7,5 km - 10 km) most trips are for domestic purposes (groceries,...master thesis 2009
- document
-
Arias-Cuevas, O. (author), Li, Z. (author), Lewis, R. (author)The adhesion (or available friction) in the wheel–rail contact is the most important parameter for the braking and traction operation of rail vehicles. Since the beginning of railway transportation, sanding from the locomotive has been a common practice to enhance the wheel–rail adhesion. In recent years, sanding from electrical multiple units ...journal article 2009
- document
-
Li, X. (author), Serdijn, W.A. (author), Woestenburg, B.E.M. (author), Bij de Vaate, J.G. (author)This paper demonstrates that a double-loop transformer-feedback power-to-current low noise amplifier, to be implemented in a 0.2 lm GaAs p-HEMT IC process, is able to obtain a noise figure less than 0.8 dB, an input return loss less than -12 dB, a flat voltage-to-current signal transfer of 180 mS, and an input-referred third-order intercept...journal article 2009
- document
-
Li, Z. (author), Arias Cuevas, O. (author)The adhesion level between wheel and rail has been since the beginning of railway a crucial parameter in the design and operation of rail vehicles. In the last decades, many railway organizations have suffered from low adhesion problems as consequence of the increased exploitation of the rail infrastructure. Leaves and water have been widely...conference paper 2009
- document
- Li, Ziru (author), Pourquie, Mathieu (author), van Terwisga, Tom (author) conference paper 2010
- document
- Li, Ye (author) journal article 2010
- document
- Liu, X.G. (author), Or, S.W. (author), Li, B. (author), Ou, Z.Q. (author), Zhang, L. (author), Zhamg, Q. (author), Geng, D.Y. (author), Yang, F. (author), Li, D. (author), Brück, E.H. (author), Zhang, Z.D. (author) journal article 2010
- document
-
Li, H. (author), Bliemer, M.C.J. (author), Bovy, P.H.L. (author)Stochastic supply and fluctuating travel demand lead to stochasticity in travel times and travel costs experienced by travelers from time to time within a day and at the same time from day to day. Many studies show that travel time un-reliability has significant impacts on traveler’s choice behavior under uncertainty. Different theories are...conference paper 2010
- document
-
Li, D. (author)The fast growing of In-Car entertainment application leads to an increasing challenge for both data computation and data communication, which are managed by the microprocessor. The thesis project is the third stage of a continuous Direct Memory Access(DMA) Controller project in NXP Semiconductors for the purpose of specifying and implementing a...master thesis 2010
- document
-
Li, D.U. (author), Arlt, J. (author), Richardson, J. (author), Walker, R. (author), Buts, A. (author), Stoppa, D. (author), Charbon, E. (author), Henderson, R. (author)A compact real-time fluorescence lifetime imaging microscopy (FLIM) system based on an array of low dark count 0.13?m CMOS singlephoton avalanche diodes (SPADs) is demonstrated. Fast background-insensitive fluorescence lifetime determination is achieved by use of a recently proposed algorithm called ‘Integration for Extraction Method’ (IEM) [J....journal article 2010
- document
-
Qian, S. (author), Li, V.C. (author), Zhou, J. (author)Strain hardening cementitious composites (SHCCs) have seen increasing field applications in past decade, yet existing quality control test methods for tensile properties are sometime difficult to implement. This paper presents a new simple inverse method for quality control of tensile strain capacity by conducting beam flexural test. It is shown...conference paper 2010
- document
-
Ding, F. (author), Akopian, N. (author), Li, B. (author), Perinetti, U. (author), Govorov, A. (author), Peeters, F.M. (author), Bof Bufon, C.C. (author), Deneke, C. (author), Chen, Y.H. (author), Rastelli, A. (author), Schmidt, O.G. (author), Zwiller, V. (author)We report on a magnetophotoluminescence study of single self-assembled semiconductor nanorings which are fabricated by molecular-beam epitaxy combined with AsBr3 in situ etching. Oscillations in the neutral exciton radiative recombination energy and in the emission intensity are observed under an applied magnetic field. Further, we control the...journal article 2010
- document
-
Li, L. (author)Long-term prediction of sediment transport and morphology has become increasingly important. One of the key issues in carrying out long-term modeling is to bridge the gap between short-term hydrodynamics varying from hours to days, and morphological changes, taking place over much longer periods. Lesser et al. (2004) and Roelvink (2006) have...master thesis 2010
- document
- Li, P. (author) master thesis 2010
- document
- Li, L. (author) master thesis 2010
- document
-
Wu, Y. (author), Li, X.W. (author), Song, G.M. (author), Wang, Y.M. (author), Narita, T. (author)Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal (SC) Ni-based TMS-82+ superalloy is studied under cyclic air at 900ºC for 200 h to assess the oxidation resistance. Regardless of the coating processing, Ni–Al coating is effective in improving the oxidation resistance due to the formation of a...journal article 2010
- document
-
Li, Y. (author)In modern molecular biology, the vast amount of experimental data enables us to obtain more comprehensive understanding of cellular activities, from transcription to metabolism. However, due to the inherent complexity of the cell and the various limitations of the measuring techniques, these data are often noisy and incomplete. Therefore,...doctoral thesis 2010
- document
-
Li, P. (author), Zdebski, D. (author), Langen, H.H. (author), Hoogstrate, A.M. (author), Oosterling, J.A.J. (author), Munnig Schmidt, R.H. (author), Allen, D.M. (author)Micro features with high aspect ratios are one of the commonly encountered geometries found in micro products. In the literature, these structures are often used in demonstrator products machined by a micromilling process. In this paper, the challenges in micromilling thin ribs ith high aspect ratios have been studied. Due to the scaling effect,...journal article 2010
- document
-
Li, X. (author), Leigh, S. (author)This research has explored environmental sustainability related literature and has performed a case study analysis on a timber and building material wholesale company relating to its environmental aspects. Published work focuses on either environmental management systems (EMS) or environmental performance evaluation (EPE). The integration of...conference paper 2010
- document
-
Giraud, G. (author), Schulze, H. (author), Li, D.U. (author), Bachmann, T.T. (author), Crain, J. (author), Tyndall, D. (author), Richardson, J. (author), Walker, R. (author), Stoppa, D. (author), Charbon, E. (author), Henderson, R. (author), Arlt, J. (author)Fluorescence lifetime of dye molecules is a sensitive reporter on local microenvironment which is generally independent of fluorophores concentration and can be used as a means of discrimination between molecules with spectrally overlapping emission. It is therefore a potentially powerful multiplexed detection modality in biosensing but requires...journal article 2010