Searched for: +
(1 - 20 of 64)

Pages

document
van Oosterom, Peter (author)
conference paper 2001
document
Karki, Sudarshan (author), Thompson, Rod (author), Mcdougall, Kevin (author), Cumerford, Nevil (author), van Oosterom, Peter (author)
The aim of this paper is to explore the implementation issues of 3D Cadastre in Queensland, Australia, which is presently moving towards a full digital lodgement of surveying information, with a focus on validation rules. In Queensland the Electronic Access for Registry Lodgement (EARL) project has already successfully implemented EARL-I, the...
conference paper 2011
document
Stoter, Jantien (author), Ploeger, Hendrik (author), Louwman, Wim (author), van Oosterom, Peter (author), Wünsch, Barbara (author)
The rights of cadastral objects may relate to spaces above or below the earth surface. The fact that several legal spaces of objects can be located above or below the same surface parcel may cause confusion in practice. In the Netherlands the location of 3D objects are in fact only represented in the well known 2D cadastral map. Complex 3D...
conference paper 2011
document
Ying, Shen (author), Guo, Renzhong (author), Li, Lin (author), van Oosterom, Peter (author), Ledoux, Hugo (author), Stoter, Jantien (author)
In this paper the design and development of a prototype 3D Cadastral system will be presented. The key aspects of this system are that the model is based on Land Administration Domain Model (LADM) and that the spatial profile is based on a full 3D topological structure. The prototype development starts with profiling the LADM (selecting relevant...
conference paper 2011
document
Vandysheva, Natalia (author), Ivanov, Anatoly (author), Pakhomov, Sergey (author), Spiering, Boudewijn (author), Stoter, Jantien (author), Zlatanova, Sisi (author), van Oosterom, Peter (author)
This paper presents the on-going project on 3D cadastre modelling in the Russian Federation. The aim of this project is to provide guidance in the development of a prototype and to create favourable legal and institutional conditions for the introduction of 3D cadastre modelling in the Russian Federation based on experience of the Netherlands...
conference paper 2011
document
Thompson, Rod (author), van Oosterom, Peter (author)
The definition of a valid 3D parcel must be correct and unambiguous, because an error or ambiguity in the definition of the extent of a property can lead to expensive legal disputes or to problems with handling 3D parcels in the information systems or problems during data transfer between two systems. This paper develops a rigorous axiomatic...
conference paper 2011
document
Stoter, Jantien (author), van Oosterom, Peter (author), Ploeger, Hendrik (author)
After more than a decade of 3D cadastre research in the Netherlands, including detailed analysis of various complex 3D right configurations and development of several prototypes, the Dutch Kadaster is implementing a 3D cadastre solution. Earlier research showed that the registration and publication of rights on multi-level property is possible...
conference paper 2012
document
Abdul Rahman, Alias (author), van Oosterom, Peter (author), Chee Hua, Teng (author), Sharkawi, Khairul Hafiz (author), Duncan, Edward Eric (author), Azri, Norsuhaibah (author), Hassan, Muhammad Imzan (author)
Three-dimensional (3D) modelling of cadastral objects (such as legal spaces around buildings, around utility networks and other spaces) is one of the important aspects for a multipurpose cadastre (MPC). This paper describes the 3D modelling of the objects for MPC and its usage to the knowledge of 3D cadastre since more and more related agencies...
conference paper 2012
document
Sapelnikov, Sergey (author), Vandysheva, Natalia (author), Pakhomov, Sergey (author), van Oosterom, Peter (author), de Vries, Marian (author), Stoter, Jantien (author), Ploeger, Hendrik (author), Spiering, Boudewijn (author), Wouters, Rik (author), Hoogeveen, Andreas (author), Penkov, Veliko (author)
This paper presents results of the Russian-Dutch project on 3D cadastre modelling in the Russian Federation. The purpose of the project was to assess added value of a 3D cadastre for better registration and recording of (rights regarding) multilevel complex buildings and constructions, and subsurface networks such as gas pipelines. The project...
conference paper 2012
document
Thompson, Rodney James (author), van Oosterom, Peter (author)
The Land Administration Domain Model (ISO 19152) (ISO-TC211 2012) defines a specific geometry form which allows the clean and simple mixing of 3D cadastral objects such as volumetric parcels with the more common 2D parcels. It does this by introducing a concept of boundary surfaces, known as “face strings”. The unbounded nature in the vertical...
conference paper 2012
document
Jeong, Dong-Hoon (author), Jang, Bong-Bae (author), Lee, Ji-Yeong (author), Hong, So-Il (author), van Oosterom, Peter (author), de Zeeuw, Kees (author), Stoter, Jantien (author), Lemmen, Christiaan (author), Zevenbergen, Jaap (author)
Korea and The Netherlands have started a 3 year cooperation covering joint research, capacity building and international advisory in the domain of cadastre and land administration with a special focus on 3D developments. At the Korean side the Korea Cadastral Survey Corporation and the University of Seoul are involved, while at the Netherlands...
conference paper 2012
document
Zulkifli, Nur Amalina (author), Rahman, Alias Abdul (author), van Oosterom, Peter (author)
This paper investigates several aspects of the Land Administration Domain Model (LADM, ISO 2012) associated to 2D and 3D cadastral situations within Malaysian cadastral registration system. Literature review shows that many countries propose their own profile based on the LADM such as The Netherlands, Portugal, Indonesia, Korea, Japan, Australia...
conference paper 2013
document
Paasch, Jesper (author), van Oosterom, Peter (author), Lemmen, Christiaan (author), Paulsson, Jenny (author)
This paper proposes a more detailed classification of the legal part of the LADM, ISO 19152, (i.e. interests in land) than possible in the current standard (ISO, 2012) today and is an attempt to raise awareness of the possibilities to further develop the LADMs ‘right’, ‘restriction’ and ‘responsibility’ classes (RRR). The term ‘land’ is here...
conference paper 2013
document
Lemmen, Christiaan (author), van Oosterom, Peter (author)
LADM is a international standard for the land administration domain. It will stimulate the development of software applications and will accelerate the implementation of proper land administration systems that will support sustainable development. The LADM covers basic information-related components of land administration (including those over...
conference paper 2013
document
van Oosterom, Peter (author), Stoter, Jantien (author), Ploeger, Hendrik (author), Lemmen, Christiaan (author), Thompson, Rod (author), Karki, Sudarshan (author)
In this paper we present the initial analysis of the second FIG 3D Cadastres questionnaire, spanning the years 2014-2018. The first version of the 3D Cadastres questionnaire was conducted in 2010 and collected the status of 2010 and the expectations or ambitions for 2014. Most of the FIG 3D Cadastres working group members had completed the 2010...
conference paper 2014
document
Isikdag, Umit (author), Horhammer, Mike (author), Zlatanova, Sisi (author), Kathmann, Ruud (author), van Oosterom, Peter (author)
Valuation of real estate/ properties is in many countries/ cities the basis for fair taxation. The value depends on many aspects, including the physical real world aspects (geometries, material of object as build) and legal/virtual aspects (rights, restrictions, responsibilities, zoning/development plans applicable to the objects spaces)....
conference paper 2014
document
Zulkifli, Nur Amalina (author), Abdul Rahman, Alias (author), van Oosterom, Peter (author)
This paper discusses 3D objects registration and modelling for cadastral objects within the Land Administration Domain Model (LADM) framework. A conceptual model as well as the associated technical model for the 2D and 3D objects have been proposed and developed for Malaysia. For both private and public land, the main subdivision of land in...
conference paper 2014
document
Felus, Yaron (author), Barzani, Shimon (author), Caine, Alisa (author), Blumkine, Nimrod (author), van Oosterom, Peter (author)
This paper contains the results of the 3D Cadastre and LADM (Land Administration Domain Model) investigations in context of possible future renewal of the Cadastral database at the Survey of Israel. The two topics of 3D Cadastres and LADM are highly related and therefore this paper covers both aspects. After recapturing the past 3D cadastre...
conference paper 2014
document
Góźdź, Katarzyna (author), Pachelski, Wojciech (author), van Oosterom, Peter (author), Coors, Volker (author)
The main objective of the paper is to elaborate the possibilities of applying CityGML for cadastral purposes, drawing particular attention to the three-dimensional representation of buildings. Technical realization of the issue is executed at the conceptual level by integration the Land Administration Domain Model, officially published as an...
conference paper 2014
document
Oldfield, Jennifer (author), van Oosterom, Peter (author), Quak, Wilko (author), van der Veen, Jeroen (author), Beetz, Jakob (author)
Much work has already been done on how a 3D Cadastre should best be developed. An inclusive information model, the Land Administration Model (LADM ISO 19152) has been developed to provide an international framework for how this can best be done. While this generic framework encompasses a wide range of eventualities, it does not prescribe the...
conference paper 2016
Searched for: +
(1 - 20 of 64)

Pages