Pages
- 1
- 2
- document
-
Wang, L. (author), Fang, G. (author), Qian, L. (author), Leeflang, M.A. (author), Duszczyk, J. (author), Zhou, J. (author)Magnesium alloys have, in recent years, been recognized as highly promising biodegradable materials, especially for vascular stent applications. Forming of magnesium alloys into high-precision thin-wall tubes has however presented a technological barrier in the fabrication of vascular stents, because of the poor workability of magnesium at room...journal article 2014
- document
- Fan, Z. (author), Koster, R.S. (author), Wang, S. (author), Fang, C. (author), Yalcin, A.O. (author), Tichelaar, F.D. (author), Zandbergen, H.W. (author), Van Huis, M.A. (author), Vlugt, T.J.H. (author) journal article 2014
- document
-
Liu, Zizheng (author), Guo, Yizhou (author), Shang, R. (author), Fang, Zheng (author), Wu, Feng (author), Wang, Zongping (author)We report herein the use of ferric iron (Fe 3 + ) and sulfite (SO 3 2 −) to activate persulfate (S 2 O 8 2 −). Decolorization and mineralization of reactive Brilliant Red X-3B (a model azo dye) by an Fe(III)/sulfite/persulfate triple system have been investigated in aqueous solutions. Initial pH and dis- solved oxygen are important factors...journal article 2016
- document
-
Dai, C. (author), Wang, C.C. (author), Wu, Chenming (author), Lefebre, Sylvain (author), Fang, G. (author), Liu, Yong-Jin (author)This paper presents a new method to fabricate 3D models on a robotic printing system equipped with multi-axis motion. Materials are accumulated inside the volume along curved tool-paths so that the need of supporting structures can be tremendously reduced - if not completely abandoned - on all models. Our strategy to tackle the challenge of...journal article 2018
- document
-
Wang, Qian (author), Fang, Gang (author), Zhao, Ying Hong (author), Zhou, J. (author)Optimized stent pattern design can effectively enhance the mechanical performance of magnesium alloy stents by adjusting strain distribution and evolution during stent deformation, thereby overcoming the limitations imposed by the intrinsic mechanical properties of magnesium alloys. In the present study, a new stent design pattern for...journal article 2018
- document
-
Zhu, Jianbo (author), Fang, Miao (author), Shi, Q. (author), Wang, Peng (author), Li, Qian (author)The large scale of construction in mega projects leads to significant environmental and socioeconomic impacts; thus, the projects should also exhibit greater social responsibility. Adopting green supply chain management in the construction process is an important way to realize the goal of sustainable development of mega projects. Because the...journal article 2018
- document
-
Fang, Bin (author), Ning, Fulong (author), Ou, Wenjia (author), Wang, Dongdong (author), Zhang, Zhun (author), Yu, Yanjiang (author), Lu, Hongfeng (author), Wu, Jianyang (author), Vlugt, T.J.H. (author)Knowledge on the kinetics of gas hydrate dissociation in microporous sediments is very important for developing safe and efficient approaches to gas recovery from natural gas hydrate (NGH) deposits. Herein, molecular dynamics (MD) simulations are used to study the dissociation kinetics in microporous sediments. The hydrate phase occupies a...journal article 2019
- document
-
Shen, X. J. (author), Li, D. Z. (author), Tang, S. (author), Chen, J. (author), Fang, H. (author), Wang, G. D. (author)It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...journal article 2019
- document
-
Fang, G. (author), Zhang, Tianyu (author), Zhong, Sikai (author), Chen, Xiangjia (author), Zhong, Zichun (author), Wang, C.C. (author)The anisotropy of mechanical strength on a 3D printed model can be controlled in a multi-axis 3D printing system as materials can be accumulated along dynamically varied directions. In this paper, we present a new computational framework to generate specially designed layers and toolpaths of multi-axis 3D printing for strengthening a model by...journal article 2020
- document
-
Wang, F. (author), Tian, Zhi (author), Fang, Jun (author), Leus, G.J.T. (author)This paper concerns wideband direction of arrival (DoA) estimation with sparse linear arrays (SLAs). We rely on the assumption that the power spectrum of the wideband sources is the same up to a scaling factor, which could in theory allow us to resolve not only more sources than the number of antennas but also more sources than the number of...conference paper 2020
- document
-
Peng, Liqi (author), Wang, Feifei (author), Zhang, Di (author), Fang, Chao (author), van der Hoek, J.P. (author), Chu, Wenhai (author)The high chlorine dosages in wastewater treatment plants during the COVID-19 pandemic may result in increased formation of disinfection by-products (DBPs), posing great threat to the aquatic ecosystem of the receiving water body and the public health in the downstream area. However, limited information is available on the effect of biological...journal article 2021
- document
-
Qian, Yi’Nan (author), Wang, Yuanshun (author), Fang, Zhenlong (author), Chen, X. (author), Miedema, S.A. (author)A jet pump is used to transport a variety of working media and is especially suitable for dredged soil transporting. In this study, a three-dimensional numerical study of a jet pump that is used for slurry delivery was carried out. The characteristics of the internal flow field of the mixing chamber with different working parameters were...journal article 2021
- document
-
Lin, Yuze (author), Li, Tao (author), Liu, Ye (author), Bahrami, Behzad (author), Guo, Dengyang (author), Fang, Yanjun (author), Shao, Yuchuan (author), Wang, Qi (author), Savenije, T.J. (author)A long photoluminescence decay lifetime has been regarded as a generic indication of long charge carrier recombination lifetime in semiconductors such as metal halide perovskites (MHPs), which have shown tremendous success in solar cells. Here, we report that MHP polycrystalline films with extrinsic metal ions have a very long charge...journal article 2021
- document
-
Wang, F. (author), Tian, Zhi (author), Leus, G.J.T. (author), Fang, Jun (author)In this paper, we study the problem of wideband direction of arrival (DoA) estimation with sparse linear arrays (SLAs), where a number of uncorrelated wideband signals impinge on an SLA and the data is collected from multiple frequency bins. To boost the performance and perform underdetermined DoA estimation, the difference co-array response...journal article 2021
- document
-
Zhang, Zhihai (author), Xiao, Hong (author), Wang, Y. (author), Fang, Jia (author), Nadakatti, M. M. (author), Wang, Haoyu (author)The lateral resistance of ballast bed is an important parameter to prevent track expansion and maintain track stability. The invasion of sand particles can cause the change of lateral resistance of ballast bed and affect the stability of track structure, but little attention has been paid to the change characteristics of nonlinear lateral...journal article 2022
- document
-
Xiao, Hong (author), Ling, Xing (author), Wang, Meng (author), Fang, Shu Wei (author), Wang, Haoyu (author)The bonding contact presents complex modes in polyurethane-mixed ballast. The commonly used parallel bond model is revised and four different contact models are developed including Ballast-Ballast Contact Bonding, Ballast-Ballast Noncontact Bonding, Ballast-Sleeper Contact Bonding, and Ballast-Sleeper Noncontact Bonding. The mechanical...journal article 2022
- document
-
Zhang, Z. (author), Wu, Chenming (author), Dai, C. (author), Shi, Qingqing (author), Fang, G. (author), Xie, Dongfang (author), Zhao, Xiangjie (author), Liu, Yong Jin (author), Wang, C.C. (author), Wang, Xiu Jie (author)Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces...journal article 2022
- document
-
Chi, Yihao (author), Xiao, Hong (author), Zhang, Zhihai (author), Fang, Shuwei (author), Wang, Haoyu (author)Turnout is the key component of the railway tracks for trains to change direction, which is vital to operational safety and passenger comfort. Therefore, it is of great importance to perform a scientific and reasonable tamping operation for turnout areas. In this paper, based on the commercial software EDEM and RECURDYN, a coupled simulation...journal article 2022
- document
-
Fang, B. (author), Lu, T. (author), Cheng, Liwei (author), Wang, Dongdong (author), Ni, Yang (author), Fan, Bowen (author), Meng, Jiuling (author), Vlugt, T.J.H. (author), Ning, Fulong (author)Methane hydrate dissociation kinetics can be inhibited in NaCl solutions; however, this effect is reversed by promoting bubble formation that enhances dissociation. The negative and positive effects of inorganic salt injection on gas production from hydrate-bearing sediments are still controversial. Here, molecular dynamics simulations were...journal article 2022
- document
-
Fang, G. (author), Tian, Yingjun (author), Yang, Zhi Xin (author), Geraedts, Jo M.P. (author), Wang, C.C. (author)This article presents an efficient learning-based method to solve the <italic>inverse kinematic</italic> (IK) problem on soft robots with highly nonlinear deformation. The major challenge of efficiently computing IK for such robots is due to the lack of analytical formulation for either forward or inverse kinematics. To address...journal article 2022
Pages
- 1
- 2