Lattice modelling of early-age creep of 3D printed segments with the consideration of stress history

We propose a new numerical method to analyze the early-age creep of 3D printed segments with the consideration of stress history. The integral creep strain evaluation formula is first expressed in a summation form using superposition principle. The experimentally derived creep compliance surface is then employed to calculate the creep strain...

Accelerated carbonation of ordinary Portland cement paste and its effects on microstructure and transport properties

Coupling of carbonation and chlorides ingress mechanisms is very common in concrete under certain exposure conditions such as coastal environments. The aggravation/ mitigation of corrosion by the existence of carbonation lies on the fact that microstructural changes due to carbonation result in changes on the transport properties of the material...

Cementitious cellular composites with auxetic behavior

Auxetic behavior refers to material with negative Poisson's ratio. In this research, a new type of cementitious auxetic material is developed. A novel crack bridging auxetic mechanism is discovered which is in contrast with a local buckling mechanism commonly employed to trigger auxetic behavior. Taking advantage of 3D printing techniques,...

Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale

The aim of this work is to investigate the mechanical performance of hardened cement paste (HCP) under compression at the micrometre length scale. In order to achieve this, both experimental and numerical approaches were applied. In the experimental part, micrometre sized HCP specimens were fabricated and subjected to uniaxial compression by...

Towards understanding stochastic fracture performance of cement paste at micro length scale based on numerical simulation

This work presents a study of stochastic fracture properties of cement paste at the micro length scale based on a combination of X-ray computed tomography (XCT) technique and discrete lattice type fracture model. Thirty virtual specimens consisting of pore, outer hydration products, inner hydration products and anhydrous cement particles were...

Using nano-indentation and microscopy to obtain mechanical properties

Simulation of mechanical behaviour of heterogeneous materials is only possible if the local properties of the components are known. In recent years nano-indentation is being applied on different levels to obtain local mechanical properties. The aim of this paper is to explore various ways to obtain these properties by combining nano-indentation...

Preparation and characterization of poly (urea-formaldehyde) walled dicyclopentadiene microcapsules

Poly (urea-formaldehyde) (PUF) shelled dicyclopentadiene (DCPD) microcapsules were prepared by in-situ polymerization technology for self-healing concrete applications. It’s found, during the process, sodium dodecyl benzene sulfonate (SDBS) behaves better in emulsification of DCPD than other surfactant of sodium lauryl sulfate (SLS) and styrene...

A tool for concrete performance assessment for ASR affected structures: An outlook

This paper outlines a project (namely PAT-ASR) which entails the development of a multi scale material performance assessment model on simulation of alkali silica reaction deployment and its effects on concrete durability. Performance models require a multi scale approach from micro (namely reaction chemistry) to macro level studies (namely...