- document
-
de Jonge, Rinke (author)The global population is growing rapidly, so the construction sector must keep up by increasing the number of houses and improving the infrastructure. The construction sector is importance to support economic growth and social development within society. However, the conflict that arises here is that the activities of the construction sector are...master thesis 2022
- document
-
Prem, Prabhat R. (author), Šavija, B. (author)A precise prediction of the ultimate bond strength between rebar and surrounding concrete plays a major role in structural design, as it effects the load-carrying capacity and serviceability of a member significantly. In the present study, Gaussian models are employed for modelling bond strength of ribbed steel bars embedded in concrete....journal article 2022
- document
-
Faassen, Luuk (author)As the average age of bridges in the Netherlands is increasing and loads are rising, more research on the capacity of these bridges is required. One of the methods to determine if a bridge still has sufficient safety is proof load testing. Stop criteria are values of structural responses at which further loading may course irreversibly damage to...master thesis 2021
- document
-
Vilanova Hanusaik, Natalia (author)Due to the recent increase in traffic capacity requirements, the need for larger spans in immersed concrete tunnels has become a pressing matter. Although commonly used in Europe, reinforced concrete has a structural capacity limit when it comes to the transverse span length. The implementation of post-tensioning could allow for longer spans and...master thesis 2021
- document
-
Nie, Ding (author), Shang, Feng (author), Han, Xun (author)Concrete dams are subjected to soft water penetration of a high water head during their long service lives. Degradation due to calcium leaching will decrease the durability of the concrete and affect dam safety. The long-term performance of concrete dams due to calcium leaching should be evaluated and predicted accurately to complete the...conference paper 2021
- document
-
Andrade, C. (author), Coppens, E. (author)In Belgium the construction of a repository for low and intermediate short living radioactive waste is in preparation. The safety is, among other aspects, based on engineered barriers of cementitious materials preventing release of radionuclides to the atmosphere or to the surrounding soil. Relatively low water infiltration through these...conference paper 2021
- document
-
Leemann, Andreas (author), Lindgård, Jan (author)ASR products formed in various aggregates of two different concrete mixtures tested both at 38 °C and 60 °C with the concrete prism test have been analysed by scanning electron microscope with energy dispersive X-ray spectroscopy. Additionally, Raman spectra of ASR products have been acquired. The variations in the chemical composition of ASR...conference paper 2021
- document
-
Wang, Haochuan (author), Feng, Pan (author), Geng, Zifan (author), Liu, Qi (author)The deterioration of organic coatings on concrete is closely linked to the efficiency in the protection process of reinforced structures. In the present work, polyurea resin and epoxy resin, which are widely used engineering coatings, were selected to measure and compare the performance under artificial aging. Fourier Transform infrared...conference paper 2021
- document
-
Ebrahimi, Nafiseh (author), Ghaziaskar, Amin (author), Makar, Jon M. (author)It is well known that iron sulphides such as pyrite (FeS2) and pyrrhotite ((Fe1-xS, 0-x-0.125) are unstable in presence of oxygen and moisture, oxidizing to produce sulfuric acid and iron sulphate. Further reactions in concrete cause the formation of expansive reaction products such as ettringite and thaumasite, potentially leading to structural...conference paper 2021
- document
-
Kara De Maeijer, Patricija (author), Craeye, Bart (author), Kazemi-Kamyab, Hadi (author), Snellings, Ruben (author), Loots, Michel (author)In the present study, a proprietary 0.2 tonne/h Dusty Cloud Separation (DCS) technology prototype by Value Ash Technologies NV (Belgium) was used to obtain ultra-fine fly ash as a novel by-product. Two types of Class F fly ash were used: separated fly ash (FA1) with particle size < 9.3 μm and ultra-fine fly ash (FA2) < 4.6 μm as sub-fraction of...conference paper 2021
- document
-
OUYANG, Boya (author), LI, Yuhai (author), SONG, Yu (author), WU, Feishu (author), YU, Huizi (author), WANG, Yongzhe (author), BAUCHY, Mathieu (author), SANT, Gaurav (author)Despite previous efforts to relate concrete proportioning and strength, a robust knowledgebased model for accurate concrete strength predictions is still lacking. As an alternative to physical or chemical-based models, machine learning (ML) methods offer a new solution to this problem. Although ML can handle the complex, non-linear, non-additive...conference paper 2021
- document
-
Paglia, C. (author), Antonietti, S. (author)In reinforced concrete structures carbonation and chloride ingress are two main phenomena that induce rebar corrosion. Agents such as CO2 gas or water containing chloride enter the cementitious material mainly throughout the pore system. The air permeability was measured with a non-destructive rapid test method. The aim of the present work was...conference paper 2021
- document
-
Mentzinis, Christos (author)Nowadays environmental issues like the depletion of the natural resources and the pollution of the environment have led many researchers to make new projects about the reuse of waste from construction and demolition again in concrete industry. Among available solutions are the partial replacement of cement with recycled ultrafine particles (RUP)...master thesis 2021
- document
-
Jonker, Martin (author), Quist, W.J. (author)Deze uitvoeringsrichtlijn (URL) beschrijft de werkzaamheden (diensten) van een adviseur in het werkveld restauratie van historisch beton, toegepast in rijks-, provinciale of gemeentelijke monumenten of karakteristieke gebouwen en objecten in beschermde gezichten.report 2021
- document
-
Van den Berghe, K.B.J. (author), Verhagen, Teun (author)Increasingly, space for remanufacturing is seen as the most valuable resource to achieve circular economy (CE) policy goals, in particular for cities. However, in many cities, industrial urban areas are increasingly subject of – mostly circular designed - residential redevelopment. The proposition of this paper is that these diminishing...journal article 2021
- document
-
Rossi, E. (author), Vermeer, C.M. (author), Mors, R.M. (author), Kleerebezem, R. (author), Copuroglu, Oguzhan (author), Jonkers, H.M. (author)Bacteria-based self-healing concrete has the ability to heal cracks due to the bacterial conversion of incorporated organic compounds into calcium carbonate. Precipitates seal the cracks, theoretically increasing the service life of constructions. The aim of this paper is to propose a precursor for bacteria-based self-healing concrete derived...journal article 2021
- document
-
Boon, Bas (author)The suitability of a cylindrical concrete sliding hinge connection in modern reinforced concrete structures has not been investigated yet. This type of connection is known for its large normal force capacity and a rotation limit only based on the geometry of the connection. For the case of underground constructions, large normal forces are often...master thesis 2020
- document
-
Drillenburg ook genaamd Lelijveld, M.P. (author)In light of the global attempts to reduce material use by the construction industry, this research focuses on combining topology optimisation with additive manufacturing of steel. It is investigated whether an automated procedure can be developed to generate reliable strut and tie models for reinforced concrete elements, while satisfying the...master thesis 2020
- document
-
Granda Valencia, Camilo (author), Lantsoght, E.O.L. (author)Large torsional moments, which need to be considered in a design, can result among others, in structures with an asymmetric layout or loading. To find the required longitudinal and transverse reinforcement to resist these torsional moments, the link between the three-dimensional action of the torsional moment and sectional analysis methods is...conference paper 2020
- document
-
Granda Valencia, Camilo (author), Lantsoght, E.O.L. (author)This paper provides a practical example of the torsion design of an inverted tee bent cap of a three-span bridge. A full torsional design following the guidelines of the ACI 318-19 building code is carried out and the results are compared with the outcomes from CSA-A23.3-04, AASHTO-LRFD-17, and EN 1992-1-1:2004 codes. Then, a summary of the...conference paper 2020