Searched for: %2520
(61 - 80 of 251)

Pages

document
Fan, Q. (author), van Essen, J.T. (author), Correia, Gonçalo (author)
Shared automated vehicles (SAV) are expected to benefit the sustainable development of urban regions and alleviate the negative impacts brought by the increasing number of private cars. In this paper, we envision a future scenario where non-pooled SAVs replace private cars and provide public on-demand mobility services to satisfy the mobility...
journal article 2023
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Liang, X. (author), Liu, C. (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Using solid waste to replace limestone filler in asphalt concrete can not only reduce the cost of road construction, but also improve the utilization rate of solid waste. In this study, PHC pile waste concrete (PPWC) was innovatively used to replace limestone filler in asphalt mixture and its effect on the physical and rheological properties...
journal article 2023
document
Yang, Xinkui (author), Wu, Shaopeng (author), Xu, S. (author), Chen, B. (author), Chen, Dongyu (author), Wang, Fusong (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Aimed to address the low utilization rate of steel slag (SS) and its challenge in resource utilization in China, this study developed ternary geopolymers made by high-content (50%) SS together with fly ash (FA) and granulated blast furnace slag (GBFS). The effects of GBFS content (0–40%) and curing methods (water curing, standard curing,...
journal article 2023
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Zhao, Zenggang (author), Zhou, Yuheng (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
As a kind of solid waste, using Prestressed High-Strength Concrete Pile Waste Concrete (PPWC) as the replacement for limestone filler in asphalt concrete can not only reduce the accumulation of PPWC and increase its utilization but also avoid the increased road construction costs and environmental degradation associated with limestone mining....
journal article 2023
document
van Velde, P.F. (author), Rieger, B. (author), Hinsdale, T.A. (author), Cnossen, J.P. (author), Fan, D. (author), Hung, S. (author), Grunwald, D. (author), Smith, C.S. (author)
Three dimensional modulation-enhanced single-molecule localization techniques, such as ModLoc, offer advancements in axial localization precision across the entire field of view and axial capture range, by applying phase shifting to the illumination pattern. However, this improvement is limited by the pitch of the illumination pattern that...
journal article 2023
document
Li, Wenyu (author), Chen, Wei (author), Jiang, Jing (author), Tang, H. (author), Fan, J. (author)
Double-sided packages for heat dissipation are an efficient thermal management mechanism for power semiconductor devices. A fan-out panel-level packaging (FOPLP), as one of the double-sided forms, exhibits excellent electro–thermal characteristics and provides low stray inductance and thermal resistance. Besides, the temperature at each point...
journal article 2023
document
Chen, Wei (author), Jiang, Jing (author), Meda, Abdulmelik H. (author), Ibrahim, Mesfin S. (author), Zhang, Kouchi (author), Fan, J. (author)
SiC MOSFET is mainly characterized by the higher electric breakdown field, higher thermal conductivity, and lower switching loss enabling high breakdown voltage, high-temperature operation, and high switching frequency. However, their performances are considerably limited by the high parasitic inductance and poor heat dissipation capabilities...
journal article 2023
document
Jiang, Jing (author), Chen, Wei (author), Qian, Yichen (author), Meda, Abdulmelik H. (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
Considerable advancements in power semiconductor devices have resulted in such devices being increasingly adopted in applications of energy generation, conversion, and transmission. Hence, we proposed a fan-out panel-level packaging (FOPLP) design for 30-V Si-based metal-oxide-semiconductor field-effect transistor (MOSFET). To achieve...
journal article 2023
document
Zhang, H. (author), Berkhout, Marco (author), Makinwa, K.A.A. (author), Fan, Q. (author)
Class-D amplifiers (CDAs) are widely used in audio applications where a high power efficiency is required. As most audio sources are digital nowadays, implementing digital-input CDAs results in higher levels of integration and lower cost. However, prior open-loop digital-input CDAs suffer from high jitter sensitivity and output-stage...
conference paper 2023
document
Jouvaeian, Amirhossein (author), Fan, Q. (author), Motz, Mario (author), Ausserlechner, Udo (author), Makinwa, K.A.A. (author)
Magnetic current sensors are widely used in applications where galvanic isolation and wide bandwidth (BW) are desired, such as in switched-mode power supplies and motor drivers. By using Hall plates for low frequencies and pick-up coils for high frequencies, hybrid magnetic sensors can achieve high resolution (tens of textmA) over a wide...
conference paper 2023
document
Fan, Penghui (author)
master thesis 2022
document
Fan, Zhi Yang (author)
The Port of Rotterdam (PoR) is the largest port in Europe and in order to maintain its status, it would need to expand. For the expansion, an extensive survey of the subsurface is needed for the construction of new port areas and its geotechnical structures. As part of designing the geotechnical structures, the subsurface is often modelled as...
master thesis 2022
document
Fan, Xingyu (author)
With the rapid rise in consumption and production, natural resources are becoming increasingly scarce. As the prevalence of the linear economy leads to neglect in the product end-of-use (EOU) phase, moving towards a circular economy (CE) can maximize the product value by recovering and reusing. <br/>As one of the circular strategies applied by...
master thesis 2022
document
Zhang, H. (author), Rozsa, N.N.M. (author), Berkhout, Marco (author), Fan, Q. (author)
The power supply rejection ratio (PSRR) of conventional differential closed-loop Class-D amplifiers is limited by the feedback and input resistor mismatch and finite common-mode rejection ratio (CMRR) of the operational transconductance amplifier (OTA) in the first integrator. This article presents a 14.4-V Class-D amplifier employing...
journal article 2022
document
Wang, Jue (author), Yuan, Weiyi (author), Li, Z. (author), Zhu, Yingcan (author), Santos, Thebano (author), Fan, J. (author)
This paper presents a convenient and efficient method to predict the mechanical solutions of a laminated Liquid Crystal Elastomers (LCEs) system subjected to combined thermo-mechanical load, based on a back propagation (BP) neural network which is trained by machine learning from a database established by analytical solutions. Firstly, the...
journal article 2022
document
Guo, Y. (author), Xie, Jiale (author), Fan, Zheng (author), Markine, V.L. (author), Connolly, David P. (author), Jing, Guoqing (author)
The properties of railway ballast material are affected by the local geologies and climatic environments from which the parent rock is sourced. These factors can make it challenging to select the most appropriate material for railway applications. To address this issue, this paper first reviews the means of ballast selection in complex...
review 2022
document
Yang, Tingli (author), Fan, Xiaochun (author), Gao, Xu (author), Gu, Qian (author), Xu, S. (author), Shui, Zhonghe (author)
In this study, a modified alkali activated slag system is designed by introducing additional calcium and aluminum containing phases in the binder, aiming at promote the formation of Friedel's salt (Fs) within the reaction products and therefore achieve a better chloride binding capacity. The effect of calcium and alumina contents on phase...
journal article 2022
document
Mao, Pengcheng (author), Fan, Huilin (author), Liu, Chang (author), Lan, Gongxu (author), Huang, Wei (author), Li, Zhipeng (author), Amin Hassan, H.M. (author), Zheng, Runguo (author), Wang, Zhiyuan (author), Sun, Hongyu (author), Liu, Yanguo (author)
Thanks to the low cost and earth's abundant potassium resources, potassium ion batteries (PIBs) have attracted much interest as alternative energy storage devices. However, there is still a great challenge to develop suitable anode materials for PIBs with high specific capacity, fast charge/discharge and stable ion storage. Nowadays,...
journal article 2022
document
Fan, Guangpeng (author), Xu, Zhenyu (author), Wang, Jinhu (author), Nan, L. (author), Xiao, Huijie (author), Xin, Zhiming (author), Chen, Feixiang (author)
Complexity of forest structure is an important factor contributing to uncertainty in aboveground biomass estimates. In this study, we present a new method for reducing uncertainty in forest aboveground biomass (AGB) estimation based on plot-level terrestrial laser scanner (TLS) point clouds reconstruction. The method estimates the total AGB...
journal article 2022
document
Yang, Jun (author), Yang, Xiaolong (author), Wrobel, Joan M. (author), Paragi, Zsolt (author), Gurvits, L. (author), Ho, Luis C. (author), Nyland, Kristina (author), Fan, Lulu (author), Tafoya, Daniel (author)
NGC 4395 is a dwarf galaxy at a distance of about 4.3 Mpc (scale: ∼0.021 pc mas-1). It hosts an intermediate-mass black hole (IMBH) with a mass between ∼104 and ∼105 solar masses. The early radio observations of NGC 4395 with the very long baseline interferometry (VLBI) network, High Sensitivity Array (HSA), at 1.4 GHz in 2005 showed that its...
journal article 2022
Searched for: %2520
(61 - 80 of 251)

Pages