- document
-
Lof, C.J. (author)An application of linear elastic fracture mechanics to 3-dimensional crack growth prediction was developed in two phases. In the first phase finite element techniques for accurate stress intensity (S.I.) calculation were evaluated and the Virtual Crack Extension (V.C.E.)-method was selected for further work. In the second phase the process of...report 1981
- document
-
Schra, L. (author), Huisman, H.N. (author)An experimental investigation was carried out into the applicability of various corrosive environments for stress corrosion crack initiation testing of high strength aluminium alloys using constant strain loaded tuning fork type specimens. The effect of surface preparation was also involved. The most important findings were that salt-chromate...report 1981
- document
-
't Hart, W.G.J. (author), Schra, L. (author)The Al-Zn-Mg-Cu alloy 7050 produced by Alcoa is a typical plate and forging alloy because of its low quench sensitivity. In order to compare this alloy with the earlier tested plate alloy 7010 an experimental programme was performed involving tensile, fracture toughness, and fatigue testing. In addition stress corrosion crack initiation and...report 1980
- document
-
't Hart, W.G.J. (author), Nederveen, A. (author)Constant amplitude and flight simulation fatigue tests have been carried out on sulphuric acid, chromic acid and phosphoric acid anodized specimens. A comparison was made with the fatigue behaviour of bare sheet material. Before fatigue testing the fracture strain of the anodic layers was determined.report 1980
- document
-
Bartelds, G. (author)The applicability of finite element methods to the analysis of cracks was studied in three phases. In the first phase the available methods for the calculation of elastic stress intensity data for cracks of arbitrary shape using finite element techniques were evaluated. The indirect energy release method using virtual crack front variation was...report 1979
- document
-
de Koning, A.U. (author)In the present report a simple analytical model for the "behaviour of a centrally cracked strip is proposed. Formulae for computation of compliance, crack opening displacement and effective crack extension force are derived. The model is based on the classical solution for a crack infinite sheet under uniaxial tension. The effect of finite...report 1979
- document
-
van Leeuwen, H.P. (author)Internal hydrogen embrittlement, stress corrosion cracking and external hydrogen embrittlement of high strength steel are analysed. They are found to have lattice decohesion as a common source.report 1976
- document
-
't Hart, W.G.J. (author), Nederveen, A. (author), Nassette, J.H. (author), van Wijk, A. (author)The influence of previous corrosion on fatigue crack initiation has been determined. Cylindrical specimens and flat specimens with a central hole of the aluminium alloy T075-T6 were corroded in a 3.5 % NaC1 solution. The cylindrical specimens were tested under constant amplitude loading while for the specimens with a central hole a block...report 1975