Mechanical Framework for Geopolymer Gels Construction: An Optimized LSTM Technique to Predict Compressive Strength of Fly Ash-Based Geopolymer Gels Concrete

As an environmentally responsible alternative to conventional concrete, geopolymer concrete recycles previously used resources to prepare the cementitious component of the product. The challenging issue with employing geopolymer concrete in the building business is the absence of a standard mix design. According to the chemical composition of...

Kinetic analysis on premixed oxy-fuel combustion of coal pyrolysis gas at ultra-rich conditions: Selective combustion and super-adiabatic flame temperatures

Oxy-fuel combustion of coal pyrolysis gas has recently been proposed to serve as internal heat source of a vertical low-temperature pyrolysis furnace, in order to make the output pyrolysis gas nearly free of nitrogen and widely useful. To keep the pyrolysis temperature and the heat carrier gas volume unchanged from air combustion to oxy-fuel...

The influencing factors of evaporation residue of emulsified modified asphalt to optimize the environmental adaptability

Compared with traditional asphalt, emulsified asphalt occurs to be a better low-temperature usability and environmental adaptability, which can reduce environmental pollution and energy consuming during road construction. The low-temperature ductility is a very important indicator to evaluate the environmental adaptability of emulsified asphalt....

Frequency and amplitude stabilized terahertz quantum cascade laser as local oscillator

We demonstrate an experimental scheme to simultaneously stabilize the frequency and amplitude of a 3.5 THz third-order distributed feedback quantum cascade laser as a local oscillator. The frequency stabilization has been realized using a methanol absorption line, a power detector, and a proportional-integral-derivative (PID) loop. The amplitude...

Frequency locking of single-mode 3.5-THz quantum cascade lasers using a gas cell

We report frequency locking of two 3.5-THz third-order distributed feedback (DFB) quantum cascade lasers (QCLs) by using methanol molecular absorption lines, a proportional-integral-derivative controller, and a NbN bolometer. We show that the free-running linewidths of the QCLs are dependent on the electrical and temperature tuning coefficients....

High-resolution heterodyne spectroscopy using a tunable quantum cascade laser around 3.5 THz

A frequency tunable terahertz heterodyne spectrometer, based on a third-order distributed feedback quantum cascade laser as a local oscillator, has been demonstrated by measuring molecular spectral lines of methanol (CH3OH) gas at 3.5 THz. By varying the bias voltage of the laser, we achieved a tuning range of ? 1?GHz of the lasing frequency,...

Terahertz heterodyne spectrometer using a quantum cascade laser

A terahertz (THz) heterodyne spectrometer is demonstrated based on a quantum cascade laser (QCL) as a local oscillator (LO) and an NbN hot electron bolometer as a mixer, and it is used to measure high-resolution molecular spectral lines of methanol (CH3OH) between 2.913–2.918 THz. The spectral lines are taken from a gas cell containing methanol...