Searched for: %2520
(41 - 60 of 341)

Pages

document
Ibrahim, M.S. (author), Yang, Y. (author), Roosen, M.A. (author), Hendriks, M.A.N. (author)
There are a large number of precast girder bridges in the Netherlands that are made continuous utilizing cast in situ layers and cross beams. When controlled by the Eurocode minimum shear reinforcement requirement, the majority of these bridges that were constructed before the 1970s have insufficient amount of transverse reinforcement, which...
conference paper 2022
document
Lu, J. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
For reinforced concrete members without shear reinforcement, the shear failure is characterized by the formation of a critical flexural shear crack. Recently experimental observations making use of Digital Image Correlation (DIC) by many researchers suggested the significance of geometric characteristics and kinematic conditions of critical...
conference paper 2022
document
Lantsoght, E.O.L. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
Om de vele bestaande betonnen bruggen – die de komende tijd het einde van hun beoogde levensduur bereiken – te beoordelen, is het belangrijk een aanpak met verschillende niveaus van beoordelen te gebruiken. Waar een handberekening niet volstaat, kunnen geavanceerde modellen, meetgegevens, belastingproeven, monitoren, inzichten van...
journal article 2022
document
Lai, Marco (author), van der Stel, Stefan D. (author), Groen, Harald C. (author), van Gastel, Mark (author), Kuhlmann, Koert F.D. (author), Ruers, Theo J.M. (author), Hendriks, B.H.W. (author)
Surgical excision is the golden standard for treatment of intestinal tumors. In this surgical procedure, inadequate perfusion of the anastomosis can lead to postoperative complications, such as anastomotic leakages. Imaging photoplethysmography (iPPG) can potentially provide objective and real-time feedback of the perfusion status of tissues....
journal article 2022
document
Hendriks, H.C.M. (author), van Prooijen, Bram (author), Cheng, C. H. (author), Aarninkhof, S.G.J. (author), Winterwerp, J.C. (author), Soetaert, K. E. (author)
The amount of suspended fines in the southern North Sea strongly depends on their exchange with the sandy seabed. This exchange is governed by resuspension of fines during storms, followed by burial in the week thereafter. Despite its importance for fine sediment dynamics, the burial of fines into a sandy seabed is currently not well...
journal article 2022
document
Arano Barenys, Assis (author), Colombo, Matteo (author), Martinelli, Paolo (author), Øverli, Jan Arve (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), di Prisco, Marco (author)
This study investigated the effect of fire on the ultimate load-bearing capacity of reinforced concrete (RC) slabs. The structural response of RC circular specimens subjected to static load conditions after exposure to a hydrocarbon fire on one side of the specimen was examined. Two fire exposure times were considered (60 and 120 min) in...
journal article 2022
document
Talgorn, E.C.V. (author), Hendriks, Monique (author), Geurts, Luc (author), Bakker, C.A. (author)
Successful implementation of sustainable innovation requires strong collaborative ecosys-tems. In particular, collaboration between scientific and people-centered expertise (e.g., designers) is essential to bring technical innovation through contextualized, meaningful and attractive experiences. However, in practice, these types of expertise...
journal article 2022
document
Phusakulkajorn, W. (author), Hendriks, J.M. (author), Moraal, J. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author), Nunez, Alfredo (author)
In this paper, a fuzzy interval-based method is proposed for solving the problem of rail defect detection relying on an on-board measurement system and a multiple spiking neural network architecture. Instead of outputting binary values (defect or not defect), all data will belong to both classes with different spreads that are given by two fuzzy...
conference paper 2022
document
Li, C. (author), Martinez, Jorge (author), Hendriks, R.C. (author)
Many multi-microphone algorithms depend on knowing the relative acoustic transfer functions (RTFs) of the individual sound sources in the acoustic scene. However, accurate joint RTF estimation for multiple sources is a challenging problem. Existing methods to jointly estimate the RTF for multiple sources have either no satisfying performance, or...
conference paper 2022
document
Van der Werf, I. (author), Martinez-Nuevo, Pablo (author), Møller, Martin Bo (author), Hendriks, R.C. (author), Martinez, Jorge (author)
The sound field in a room can be represented by a weighted sum of room modes. To estimate the room modes, current literature uses on-the-grid, sparse reconstruction methods. However, these on-the-grid methods are known to suffer from basis mismatch. In this work, we investigate the use of a gridless framework for estimating room modes using...
conference paper 2022
document
Bahafid, Sara (author), Hendriks, M.A.N. (author), Jacobsen, Stefan (author), Geiker, Mette (author)
We simulate the glue-spall stress due to mechanical interactions between a frozen saline solution (brine-ice composite) and a non-air entrained concrete surface including the impact of the micro-structure of the frozen solution. The presence of brine channels at the ice/concrete interface was found to be a prerequisite to induce stress during...
journal article 2022
document
Xia, Yi (author), Langelaar, Matthijs (author), Hendriks, M.A.N. (author)
Strut-and-Tie modelling (STM) has been widely applied to design D-regions of reinforced concrete structures. For economic and environmental reasons there is a need for optimized Strut-and-Tie models. How to optimize Strut-and-Tie models considering multiple load combinations has not been investigated extensively in the literature. In order to...
journal article 2022
document
Azizian Amiri, S. (author), van Berckel, Pieter (author), Lai, Marco (author), Dankelman, J. (author), Hendriks, B.H.W. (author)
Emerging intraoperative tumor margin assessment techniques require the development of more complex and reliable organ phantoms to assess the performance of the technique before its translation into the clinic. In this work, electrically conductive tissue-mimicking materials (TMMs) based on fat, water and agar/gelatin were produced with...
journal article 2022
document
Roosen, M.A. (author), Yang, Y. (author), van der Veen, C. (author), Schaafsma, Dick G. (author), Hendriks, M.A.N. (author)
When the shear resistance of prestressed beams with stirrups is determined with the current Eurocode, no distinction is made between regions with and without flexural cracks. This while it may be expected that a region without flexural cracks will have a higher shear resistance. This is due to the lower longitudinal strains and the narrow...
journal article 2022
document
Losch, M.S. (author), Kardux, Famke (author), Dankelman, J. (author), Hendriks, B.H.W. (author)
Introduction: Steering light is relevant to many medical applications that require tissue illumination, sensing, or modification. To control the propagation direction of light beams, a great variety of innovative fiber-optic medical devices have been designed. Areas covered: This review provides a comprehensive overview of the patent...
review 2022
document
Sun, M. (author), de Groot, N.M.S. (author), Hendriks, R.C. (author)
Mathematical models of the electrophysiology of cardiac tissue play an important role when studying heart rhythm disorders like atrial fibrillation. Model parameters such as conductivity, activation time, and anisotropy ratio are useful parameters to determine the arrhythmogenic substrate that causes abnormalities in the atrial tissue....
journal article 2022
document
Jadwiga Osmolska, Magdalena (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Markeset, Gro (author)
Corrosion and shear cracking are frequently observed near supports of pretensioned bridge girders in coastal climates, so non-linear finite element analysis was used to study the effect of corrosion on shear performance in a real case study. Varying degrees of corrosion and various locations (top strands, bottom strands, vertical stirrups and...
journal article 2022
document
van Straten, Bart (author), Tantuo, B.N. (author), Sperna Weiland, Nicolaas H. (author), Dankelman, J. (author), Hendriks, B.H.W. (author), Horeman, T. (author)
Introduction: Disposable instruments in healthcare have led to a significant increase of medical waste. The aim of this study is to validate the recycling of disposable Zamak laryngoscope blades into new medical products by using a new ‘all-in-one’ affordable reprocessing setup as alternative for die-casting. <br/>Methods: An “all-in-one”...
journal article 2022
document
Aydin, B.B. (author), Binici, Baris (author), Hendriks, M.A.N. (author), Tuncay, Kagan (author)
Significant infill wall damage in reinforced concrete frame buildings was observed in the past earthquakes. A vast number of numerical approaches have been proposed to estimate the non-linear behavior of infilled frames at different scales. Mesoscale lattice models were successfully used in the past to simulate the behavior of reinforced...
journal article 2022
document
Zhang, F. (author), Yang, Y. (author), Fennis, Sonja A.A.M. (author), Hendriks, M.A.N. (author)
Acoustic emission (AE) signal parameters can be used to classify the source type in concrete structures. However, signal parameters are influenced by the wave propagation from the source to the receiver, leading to wrong source classification results, especially for monitoring large concrete structures. This paper experimentally evaluates the...
journal article 2022
Searched for: %2520
(41 - 60 of 341)

Pages