Searched for: %2520
(1 - 20 of 63)

Pages

document
Perruchoud, V.P. (author), Alderliesten, R.C. (author), Mosleh, Yasmine (author)
Biobased fibre-reinforced polymer (FRP) composites, consisting of natural lignocellulosic fibres such as flax or hemp, are great alternatives to synthetic fibres to mitigate the environmental impact of high-performance composites in engineering structures. Natural fibres such as flax have damping and specific mechanical properties suitable to...
journal article 2024
document
Prosperi, A. (author), Longo, M. (author), Korswagen, Paul A. (author), Korff, M. (author), Rots, J.G. (author)
In this study, 2D and 3D modelling strategies are used to represent the behaviour of historical masonry buildings on strip foundations undergoing settlements. The application focuses on a two-story building, typical of the Dutch architectural heritage. An improved 2D modelling is presented: It includes the effect of the lateral walls to...
journal article 2024
document
Nikolic, Ksenija (author), De Wispelaere, Jelle (author), Ravi, Gopalakrishnan (author), Hertelé, Stijn (author), Depover, Tom (author), Verbeken, Kim (author), Petrov, R.H. (author)
Damage in bearings is closely associated with the presence of microstructural alterations, known as white etching areas (WEAs) and white etching cracks (WECs). One of the main reasons for the creation of these microstructural alterations is the presence of defects in the material, such as non-metallic inclusions. Manganese sulfides and...
journal article 2023
document
van der Vegt, Niels (author)
Over time, degradation processes might cause damage to pattern-placed revetments. Examples of such damages are missing elements, deformation, and the loss of joint filling. However, little is known about the exact consequences of those damages. Therefore, when damage is observed during an inspection, it is estimated based upon experience what...
master thesis 2021
document
Jonkheijm, Laurens (author)
Due to an exponential growth in the number of shipments of Unmanned Aerial Systems (UAS), the amount of these devices operating in the sky has increased remarkably over the last few years. This led to an increasing number of proximity incidents with manned aircraft. Since these devices share certain airspace with rotorcraft, the question arises...
master thesis 2020
document
Kong, Zhenheng (author)
Cardiovascular disease has caused 3.9 million deaths in Europe and over 1.8 million deaths in the European Union, which accounts for 45\% of all deaths in Europe and 37\% of all death in the European Union in 2017. Cardiovascular disease is mainly caused by atherosclerosis. Atherosclerosis is a kind of disease where the inside of the artery gets...
master thesis 2020
document
Wolters, Djurre (author)
A stinger is a steel space frame structure, used on pipe-lay vessels, to support the weight of a suspended pipeline. A stinger is highly fatigue loaded due to environmental loads, vessel motions and variable pipe loads. In the design phase, predictions for the structural behaviour of the stinger were made. However, inspection history showed...
master thesis 2019
document
Venkatesan, Karthik (author)
This research project was initiated as a result of a curiosity and desire to investigate the applicability of surrogate modelling to analyse complex non-linear behaviour in aircraft structures. The study chose to focus on modelling damage in composite plates, and through a literature review, deemed that the generation of graphical outputs was a...
master thesis 2019
document
Shakerifard, B. (author)
Global warming, continuous demand on energy from fossil fuels as a limited natural resource, and costumers’ high expectations regarding product quality are three global challenges that the automotive industry is facing. Fuel consumption reduction has a significant impact on preserving fossil fuels, lowering fossil fuel dependency and the CO2...
doctoral thesis 2019
document
Jansen, Lise (author)
’De Watersnood van 1953’, the largest Dutch flood in recent history, caused the death of 1795 people in the Netherlands directly from the flood conditions, while in the UK, 315 were recorded. Most of them were among those whose residence collapsed due to high water depth, quick rise rate of the water or strong flow velocity. Based on historical...
master thesis 2019
document
Sauvage, L.L.F. (author), Wei, W. (author), Martinez, M.J. (author)
Pastel paintings are one of the most fragile types of objects of art. When handling loan requests, conservators lack scientific data to assess the risk for damage in transport, and thus for making decisions whether they can be transported. A research project was initiated in 2014 to investigate the effect of vibrations on the condition of pastel...
journal article 2018
document
Brussee, Anneroos (author), van der Doef, Laura (author), Jansen, Lise (author), Oostrum, Natasja (author)
The Addicks and Barker Reservoirs, built in the forties, are located in Houston and collect precipitation and run-off from upstream areas to reduce flood risks along Buffalo Bayou to protect downtown Houston. During Hurricane Harvey (August 25 - August 30, 2017), the precipitation reached a new record of 910 mm [36.2 inches] in a 4 day period in...
student report 2017
document
Sebastian, Antonia (author), Lendering, K.T. (author), Kothuis, B.L.M. (author), Brand, A.D. (author), Jonkman, Sebastiaan N. (author), van Gelder, P.H.A.J.M. (author), Godfroij, Maartje (author), Kolen, B. (author), Comes, M. (author), Lhermitte, S.L.M. (author), Meesters, Kenny (author), van de Walle, B.A. (author), Ebrahimi Fard, A. (author), Cunningham, S. (author), Khakzad, N. (author), Nespeca, V. (author)
On August 25, 2017, Hurricane Harvey made landfall near Rockport, Texas as a Category 4 hurricane with maximum sustained winds of approximately 200 km/hour. Harvey caused severe damages in coastal Texas due to extreme winds and storm surge, but will go down in history for record-setting rainfall totals and flood-related damages. Across large...
report 2017
document
Gransden, D.I. (author), Alderliesten, R.C. (author)
Part of the work of AircraftFire, a project investigating the effects of fire and crash on aircraft survivability, is presented. This work compares the effect of changing the material model from metallic to composite on the impact damage and floor acceleration characteristics. First, the metallic two- and six-frame sections of an A320 are...
journal article 2017
document
Korswagen Eguren, P.A. (author)
The possibility of multi-hazards, the occurrence of two or more (natural) hazards at once or shortly after another in the same location, can lead to an increased risk of structural damage and life loss. In the Netherlands, seismically-unprepared houses are especially vulnerable to newly expected earthquakes in the region of Groningen. These...
master thesis 2016
document
Magalhaes Pereira, L.F. (author), Weerheijm, J. (author), Sluys, L.J. (author)
The development of realistic numerical tools to efficiently model the response of concrete structures subjected to close-in detonations and high velocity impacts has been one of the major quests in defense research. Under these loading conditions, quasi-brittle materials undergo a multitude of failure (damage) mechanisms. Dynamic tensile failure...
conference paper 2015
document
Noorman, D.C. (author)
Laminated composites is a material that is rapidly being adapted in the aircraft industry and new joining techniques are being researched for new structural designs. One such technique is adhesive bonding, which can result in decreased weight, fuel saving and improved strength of aircraft components. Robust strength and failure analysis methods...
master thesis 2014
document
Van Verseveld, H.C.W. (author)
Hurricane Sandy (2012), which made landfall in New Jersey on October 29th, made devastating impact on the East Coast of the USA and struck major parts of New York City, including the economic centre of Manhattan. The total damage (in the USA and Caribbean) is in excess of 100 billion US$ with estimates ranging between 78 and 97 billion US$ for...
master thesis 2014
document
Pawirokromo, J.S.W. (author)
Some storage tank terminals located in hurricane prone regions were heavily struck by hurricanes. An example is the storage tank terminal of Stolthaven Terminals (Stolt-Nielsen Limited) which is located in New-Orleans and was severely struck by Hurricane Katrina and Isaac. Damage to the terminal was caused by high wind pressures, but mainly due...
master thesis 2014
document
Hai, T.L. (author), Verhagen, H.J. (author)
Many dike failures have been ignited by damage due to erosion on the landward slopes. This paper investigates how grass covered slopes perform when being attacked by overtopping flow during storm surges. Based on observations during a number of simulator tests, damage is classified into three types 'head-cut', 'roll-up' and 'collapse' depending...
conference paper 2014
Searched for: %2520
(1 - 20 of 63)

Pages