- document
-
Tsui, T.P.Y. (author), Peck, David (author), Geldermans, Bob (author), van Timmeren, A. (author)In recent years, implementing a circular economy in cities (or “circular cities”) has been proposed by policy makers as a potential solution for achieving sustainability. One strategy for circular cities is to reintroduce manufacturing into urban areas (or “urban manufacturing”), allowing resource flows to be localized at the city scale. However...review 2021
- document
-
Henry, Marvin (author), Schraven, D.F.J. (author), Bocken, Nancy (author), Frenken, Koen (author), Hekkert, Marko (author), Kirchherr, J.W. (author)Circular economy (CE) and sharing economy (SE) are much discussed concepts but potential links between them have not been examined systematically so far. The concepts’ popularity coupled with a lack of definitional consensus may hinder their potential to advance sustainability transitions. Hence, the first comparative bibliometric study of these...journal article 2021
- document
-
van Straten, Bart (author), Dankelman, J. (author), van der Eijk, A. (author), Horeman, T. (author)The Circular Economy faces a growing interest. The aim of this study is to determine the feasibility of a circular approach towards reusing discarded hospital instruments and stainless steel waste. Secondary, this study aims to identify if any cost savings can be realized by following a circular instrument repair and recycling approach....journal article 2021
- document
-
Brown, P.D. (author), Von Daniels, C. (author), Bocken, N.M.P. (author), Balkenende, R. (author)Circular oriented innovation commonly requires collaboration. Yet, to date, circular research lacks empirical investigation into collaborative processes. Collaborative processes are, however, highly researched within strategic management literature, thus offering valuable insights. The purpose of this paper is to investigate, identify and...journal article 2021
- document
-
Lange, K.P.H. (author), Korevaar, G. (author), Oskam, Inge (author), Nikolic, I. (author), Herder, P.M. (author)The viability of novel network-level circular business models (CBMs) is debated heavily. Many companies are hesitant to implement CBMs in their daily practice, because of the various roles, stakes and opinions and the resulting uncertainties. Testing novel CBMs prior to implementation is needed. Some scholars have used digital simulation models...journal article 2021
- document
-
Polat, E. (author), van Dam, S.S. (author), Bakker, C.A. (author)The Covid-19 outbreak forced many universities across the world to transition from a traditional or blended format to fully online education. This paper presents a case study on the transition to an online education format for a circular design course. Both quantitative and qualitative data were collected through a survey with 26 students and...journal article 2021
- document
-
De la Torre, Rocio (author), Onggo, Bhakti S. (author), Corlu, Canan G. (author), Nogal Macho, M. (author), Juan, Angel A. (author)The prevailing need for a more sustainable management of natural resources depends not only on the decisions made by governments and the will of the population, but also on the knowledge of the role of energy in our society and the relevance of preserving natural resources. In this sense, critical work is being done to instill key concepts—such...journal article 2021
- document
-
van Straten, Bart (author), van der Heiden, D.R. (author), Robertson, P.D. (author), riekwel, corinne (author), Jansen, F.W. (author), van der Elst, M. (author), Horeman, T. (author)Introduction<br/>Hospitals in the Netherlands generate approximately 1.3 million kg of waste from the polypropylene (PP) wrapping paper (WP) used to wrap surgical instruments each year. The aim of this study was to develop a method to recycle WP waste into new medical devices.<br/><br/>Methods<br/>WP was recovered from Maasstad Hospital,...journal article 2021
- document
-
Hartwell, R.C. (author), Macmillan, Sebastian (author), Overend, M. (author)Reuse and high-value recycling have a pivotal role to play in reducing waste and minimising carbon emissions in the built environment. Design strategies for such recovery methods have yet to be fully established in the façade industry. Meanwhile, stringent regulations, aimed at reducing operational carbon emissions of buildings and improving...journal article 2021
- document
-
Oorschot, L.M. (author), Asselbergs, M.F. (author)For a moment, it seemed that the architect had disappeared from the construction supply chain for sustainable and affordable housing provided by Dutch housing associations. Large contractors were making direct agreements with housing associations and wanted to scale up production with their housing factories. However, with the ‘So You Think You...journal article 2021
- document
-
Pozo Arcos, B. (author), Dangal, S. (author), Bakker, C.A. (author), Faludi, Jeremy (author), Balkenende, R. (author)The process of fault diagnosis is an essential first step when repairing a product: it determines the condition of the parts and identifies the origin of failure. We report on how product users go through the process of fault diagnosis in consumer products and the influence of design features on this process. Two groups of 12 participants were...journal article 2021
- document
-
Harris, Steve (author), Tsalidis, G.A. (author), Corbera, Joan Berzosa (author), Espi Gallart, Jose Jorge (author), Tegstedt, Fredrik (author)Technological developments are opening new avenues to facilitate the circular economy through resource recovery from industrial wastewater. This paper presents the use of Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) in the development of technology solutions for the treatment of brine wastewater and recovery of by-products. Four...journal article 2021
- document
-
Heurkens, E.W.T.M. (author), Dabrowski, M.M. (author)Circular economy (CE), the new ‘buzzword’ in urban and regional studies and policy debates, is about shifting from a linear production process towards a circular one in which the generation of waste is minimised, materials circulate in ‘closed loops’, and waste is not considered a burden but rather a resource that brings new economic...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials offer many advantages during the use phase, but recovery at the end of a lifecycle remains a challenge. Structural reuse, where an end of life product is segmented into construction elements, may be a promising alternative. However, composites are often used in large, complex shaped products with optimised material...journal article 2021
- document
-
Rukanova, B.D. (author), Tan, Y. (author), Hamerlinck, Robin (author), Heijmann, Frank (author), Ubacht, J. (author)Circular economy (CE) and sustainability are high on the political agenda of governments nationally and internationally. Governments are developing instruments to stimulate the CE, but without monitoring in place, these measures can be subject to abuse, failing to achieve the desired effects. CE monitoring, however, is still a nascent topic in...conference paper 2021
- document
-
Ampe, K.V.J. (author), Paredis, Erik (author), Asveld, L. (author), Osseweijer, P. (author), Block, Thomas (author)More pluralised understandings of incumbencies are often overlooked in transitions research, which may lead to underestimating the enabling roles of incumbents in niche projects. This study explores these roles by applying a power framework to five struggles revolving around a path-breaking decentralised wastewater treatment project in the...journal article 2021
- document
-
Sumter, Deborah (author), de Koning, J.I.J.C. (author), Bakker, C.A. (author), Balkenende, R. (author)In a recent study, we identified seven key circular competencies for design: (1) Design for Multiple Use Cycles, (2) Design for Recovery, (3) Circular Impact Assessment, (4) Circular Business Models, (5) Circular User Engagement, (6) Circular Economy Collaboration, and (7) Circular Economy Communication. These were derived from small‐scale...journal article 2021
- document
-
Assessing cultural heritage adaptive reuse practices: Multi-scale challenges and solutions in rijekaPintossi, Nadia (author), Kaya, Deniz Ikiz (author), Pereira Roders, A. (author)Cultural heritage is recognized as a driver and enabler for sustainable development, and its role within the circular economy and circular cities is gaining attention. Its adaptive reuse plays a significant role in this while prolonging the heritage lifespan, preserving the values associated with heritage assets, and creating shared values....journal article 2021
- document
-
Brown, P.D. (author), Baldassarre, B.R. (author), Konietzko, J.C. (author), Bocken, N.M.P. (author), Balkenende, R. (author)Circular oriented innovation aims to address sustainability problems such as resource scarcity, pollution and climate change by (re)designing industrial products, processes, business models, and value network configurations. Although the literature identifies collaboration as crucial for circular oriented innovation—due to the complexity,...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials are an attractive material choice as they enable lightweight, low-maintenance products with a long lifespan. Recycling these materials, however, remains a chal-lenge. Homogeneous material composition and the use of thermoset matrices complicate repro-cessing, and result in low-grade recyclate. This means that closing the...journal article 2021