- document
-
Yang, F. (author), Fu, Dafang (author), Zevenbergen, C. (author), Boogaard, Floris C. (author), Singh, Rajendra Prasad (author)Evaluation of the hydrological performance of grassed swales usually needs long-term monitoring data. At present, suitable techniques for simulating the hydrological performance using limited monitoring data are not available. Therefore, current study aims to investigate the relationship between saturated hydraulic conductivity (K<sub>s</sub>...journal article 2024
- document
-
Yang, F. (author), Fu, Dafang (author), Zevenbergen, C. (author), Boogaard, Floris C. (author), Singh, Rajendra Prasad (author)Saturated hydraulic conductivity (K<sub>s</sub>) of the filler layer in grassed swales are varying in the changing environment. In most of the hydrological models, K<sub>s</sub> is assumed as constant or decrease with a clogging factor. However, the K<sub>s</sub> measured on site cannot be the input of the hydrological model directly....journal article 2023
- document
-
Boogaard, Menno (author)Human force proprioception has previously been shown to be important in manual control tasks. Recent experiments suggest that force proprioception is more accurate than position proprioception. Still, knowledge about proprioceptive qualities and their relevance in manual control is lacking or inconsistent. This research aims to experimentally...master thesis 2021
- document
-
Boogaard, Lars (author)Lower limb exoskeletons enable paraplegic patients to stand-up and walk again. However, the weight and overall functional performance of the exoskeleton prevents them from being widely used. To reduce the weight and increase<br/>the performance, pneumatic actuators can be used as an alternative to the commonly used electromechanical actuators....master thesis 2021
- document
-
Boogaard, Bob (author), Tas, Ali (author), Nijssen, J.P.A. (author), Broeren, F.G.J. (author), van den Dobbelsteen, J.J. (author), Verhoeven, Vincent (author), Pluim, Jip (author), Dekker, Sing (author), Snijder, Eric J. (author), van Hemert, Martijn J. (author), Herfst, Sander (author)The SARS-CoV-2 pandemic resulted in shortages of production and test capacity of FFP2-respirators. Such facemasks are required to be worn by healthcare professionals when performing aerosol-generating procedures on COVID-19 patients. In response to the high demand and short supply, we designed three models of facemasks that are suitable for...journal article 2021
- document
-
Blad, Thijs (author), Nijssen, J.P.A. (author), Broeren, F.G.J. (author), Boogaard, Bob (author), Lampaert, S.G.E. (author), van den Toorn, Stefan (author), van den Dobbelsteen, J.J. (author), Spaander, Joshua (author)Introduction: The current COVID-19 pandemic has caused large shortages in personal protective equipment, leading to hospitals buying their supplies from alternative suppliers or even reusing single-use items. Equipment from these alternative sources first needs to be tested to ensure that they properly protect the clinicians that depend on...journal article 2020
- document
-
Boogaard, Mina (author)The start of this project is a first version of a serious game that was designed by the company MEDD. This is an independent design and consultancy agency for healthcare. They designed this game as part of their ‘Met Elkaar Durven Doen’ toolbox, which they use in trainings and workshops. The Haga Hospital is the co-design partner of the game,...master thesis 2019
- document
-
Boogaard, Jeroen (author)This project seeks to give new purpose to the Centraal Beheer building in Apeldoorn, designed by Herman Hertzberger, by introducing a new Montessori Education program, containing a Primary School and Secondary School. Through interventions this design aims to redefine the spatial structure of Centraal Beheer, to create a well functioning...master thesis 2019
- document
-
Boogaard, M.A. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)Vibration-based condition monitoring is a powerful tool for remotely assessing the quality of railway components. Due to its design, railway crossings suffer from faster degradation, because of the transition from stock rail onto the needle. Since this is also a repetitive load, a small amount of wear will increase the degradation. Measuring...journal article 2018
- document
-
Wei, Z. (author), Nunez, Alfredo (author), Boogaard, M.A. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)In this paper, we present a method for evaluating the performance of railway crossing rails after long-term service. The method includes 1) 3D profile and hardness measurements; 2) finite element simulation of wheel/rail interaction; and 3) numerical prediction of rail degradation. We conducted a case study on a crossing that had been in service...journal article 2018
- document
-
Wei, Z. (author), Boogaard, M.A. (author), Nunez, Alfredo (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)This paper describes an approach for characterizing the dynamic behavior of the vehicle/track interaction at railway crossings. In the approach, we integrate in situ axle box acceleration (ABA) measurements with roving-accelerometer hammer tests to evaluate the influence of train speed, train moving direction (facing and trailing directions),...journal article 2018
- document
-
Yang, Z. (author), Boogaard, M.A. (author), Wei, Z. (author), Liu, Jinzhao (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...journal article 2018
- document
-
Yang, Z. (author), Boogaard, M.A. (author), Chen, Rong (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...journal article 2018
- document
-
Boogaard, F.C. (author)The results obtained in this study are encouraging and important for the implementation of permeable pavement and swales in The Netherlands, since the performance of SUDS in delta areas and in areas in the world with comparable hydraulic circumstances has been viewed with skepticism. The research undertaken on Dutch SUDS field installations has...doctoral thesis 2015
- document
-
Boogaard, F.C. (author), Lucke, T. (author), Van de Giesen, N.C. (author), Van de Ven, F.H.M. (author)Permeable pavements are a type of sustainable urban drainage system (SUDS) technique that are used around the world to infiltrate and treat urban stormwater runoff and to minimize runoff volumes. Urban stormwater runoff contains significant concentrations of suspended sediments that can cause clogging and reduce the infiltration capacity and...journal article 2014
- document
- Boogaard, F.C. (author), De Graaf, R. (author), Dionisio Pires, M. (author) journal article 2014
- document
-
Boogaard, F.C. (author), Van de Ven, F. (author), Langeveld, J.G. (author), Van de Giesen, N. (author)Stormwaters, flowing into storm sewers, are known to significantly increase the annual pollutant loads entering urban receiving waters and this results in significant degradation of the receiving water quality. Knowledge of the characteristics of stormwater pollution enables urban planners to incorporate the most appropriate stormwater...journal article 2014
- document
-
Lucke, T. (author), Boogaard, F. (author), Van den Ven, F. (author)Permeable pavements are specifically designed to promote the infiltration of stormwater through the paving surface in order to reduce run-off volumes and to improve water quality by removing sediment and other pollutants. However, research has shown that permeable pavements can become clogged over time and this reduces their infiltration...journal article 2014
- document
- Geldof, G. (author), Boogaard, F.C. (author) journal article 2013
- document
-
Boogaard, M.A. (author)This thesis will propose a new method to predict the response of sensitive equipment, once it is installed on the factory floor. Currently, only the stiffness of the floor is taken into account when the dynamic response of a machine on a floor is predicted. To improve these methods, a short literature survey is done about the dynamics of factory...master thesis 2012